Corrosion Behavior of Sensitized AISI 304 Stainless Steel in Acid Chloride Solution
Open Access
- 30 November 2022
- Vol. 15 (23) , 8543
Abstract
Corrosion resistance of sensitized austenitic stainless steel (SS) in chloride environments is currently the subject of numerous studies. Most of them are focused on neutral chloride solutions at room temperature and the experiments are carried out on ground stainless steels surfaces. This paper deals with the corrosion behavior of sensitized AISI 304 stainless steel in acid 1 M chloride solution (pH = 1.1) at the temperatures of 20 ± 3 °C and 50 °C. The specimens after sensitization are tested as covered by high-temperature surface oxides (“heat tinted”), and also after their chemical removal to assess the impact of the surface state on corrosion resistance. Potentiodynamic polarization (PP) and exposure immersion test are used as the independent corrosion tests. Microstructure before/after exposure immersion test is evaluated by optical microscopy (OM) and SEM. The results obtained showed that sensitization significantly conditions corrosion regardless of the removal of high-temperature oxides, and the elevated temperature mainly acts as its accelerating factor.Keywords
Funding Information
- Scientific Grant Agency of Ministry of Education, Science and Sport of Slovak Republic and Slovak Academy of Sciences (VEGA No. 1/0134/20)
- Project to support young researchers at UNIZA (12715—project leader Ing. Lenka Kuchariková)
This publication has 34 references indexed in Scilit:
- Effect of Surface Finish on the Pitting Corrosion Behavior of Sensitized AISI 304 Austenitic Stainless Steel Alloys in 3.5% NaCl SolutionsSurface Engineering and Applied Electrochemistry, 2017
- Study of the Corrosion Resistance of Type 304L and 316 Austenitic Stainless Steels in Acid Chloride SolutionOriental Journal of Chemistry, 2017
- Pitting corrosion of sensitised type 304 stainless steel under wet–dry cycling conditionCorrosion Science, 2017
- The effects of passivation parameters on pitting potential of biomedical stainless steelChemical Industry and Chemical Engineering Quarterly, 2017
- Intergranular Corrosion Behavior of Low-Nickel and 304 Austenitic Stainless SteelsJournal of Materials Engineering and Performance, 2016
- Specification of surface parameters effects on corrosion behavior of the AISI 316Ti in dependence on experimental methodsJournal of Adhesion Science and Technology, 2016
- Influence of sensitization on microstructure and passive property of AISI 2205 duplex stainless steelCorrosion Science, 2016
- Effect of grain size on pitting corrosion of 304L austenitic stainless steelCorrosion Science, 2015
- Correlation between sensitisation and pitting corrosion of AISI 403 martensitic stainless steelCorrosion Science, 2015
- The Effect of Low Temperature Sensitization on Corrosion Resistance of Ultrafine-Grained Type 321 Stainless SteelsJournal of Materials Engineering and Performance, 2013