Heat transfer enhancement by sinusoidal wavy tape insert in two-pass ribbed channels
Authors:
Open Access
- 1 January 2022
- journal article
- research article
- Published by National Library of Serbia in Thermal Science
- Vol. 26 (6 Part A) , 4657-4668
Abstract
The turbine inlet temperature is one of the most critical parameter that determines the thermal efficiency and thrust-weight ratio of the gas turbine. However, the higher gas turbine inlet temperature significantly increases the thermal stress on the blade, which necessitates effective cooling strategy to reduce the blade temperature. In this study, a united blade cooling strategy was developed by adopting a two-pass ribbed cooling channel with wavy tape for the reason that ribs are near-wall turbulence promoters while the wavy tape is core-region promoter with relatively lower pressure-drop penalty. Ribs and wavy tape may complement each other in the cooling channel. The synergistic effect of the combined near-wall and core-region heat transfer promoter was numerically studied for Reynolds numbers from 6000 to 30000. Two key geometrical factors, namely rib to wave crest phase shift and relative wave amplitude, have significant effect on the thermal performance. The results demonstrate that wavy tape with different phase shift configurations can eliminate the lower heat transfer areas and produce more uniform heat transfer. The 0? phase shift achieved best overall thermal performance, which provided 1.07-1.08 times the flat tape heat transfer enhancement with 1.09-1.11 times the pressure drop penalty. The better heat performance is due to the secondary flow induced by wavy tape, which enhances the fluid mixing between near-wall and core-region.Keywords
This publication has 31 references indexed in Scilit:
- Influence of Channel Orientation on Heat Transfer in a Two-Pass Smooth and Ribbed Rectangular Channel (AR=2:1) Under Large Rotation NumbersJournal of Turbomachinery, 2011
- Parametric Numerical Study of Flow and Heat Transfer in Microchannels With Wavy WallsJournal of Heat Transfer, 2011
- Numerical investigation on synthetical performances of fluid flow and heat transfer of semiattached rib-channelsInternational Journal of Heat and Mass Transfer, 2011
- Heat transfer and pressure drop in a spirally grooved tube with twisted tape insertInternational Journal of Heat and Mass Transfer, 2009
- An experimental study of flow and heat transfer in sinusoidal wavy passagesInternational Journal of Heat and Mass Transfer, 1999
- Detailed heat transfer distributions in two-pass square channels with rib turbulatorsInternational Journal of Heat and Mass Transfer, 1997
- Regional Heat Transfer in Two-Pass and Three-Pass Passages With 180-deg Sharp TurnsJournal of Heat Transfer, 1991
- Augmented heat transfer in rectangular channels of narrow aspect ratios with rib turbulatorsInternational Journal of Heat and Mass Transfer, 1989
- Local Heat/Mass Transfer Distributions Around Sharp 180 deg Turns in Two-Pass Smooth and Rib-Roughened ChannelsJournal of Heat Transfer, 1988
- Developing heat transfer in rectangular channels with rib turbulatorsInternational Journal of Heat and Mass Transfer, 1988