Structural-Phase Evolution and Morphology of Cobalt-Free WC Hard Alloys Produced by SPS
Open Access
Abstract
This study examines the effect of spark plasma sintering (SPS) temperature on the phase composition, microstructure, densification, and microhardness of cobalt-free WC–Fe and WC–Fe–Ni hard alloys. Increasing the sintering temperature from 1250 °C to 1300 °C improved densification in both alloy systems. Residual porosity decreased from 13.2% to 12.7% in the WC–Fe–Ni alloy and from 13.8% to 12.0% in the WC–Fe alloy, while the density increased from 12.39 g/cm3 to 12.46 g/cm3 and from 12.15 g/cm3 to 12.40 g/cm3, respectively. The WC–Fe -Ni alloy exhibited a more homogeneous microstructure and higher microhardness, increasing from 708 10 HV0.2 to 823 ± 15 HV0.2, whereas the WC–Fe alloy showed an increase from 630 ± 15 HV0.2 to 770 ± 5 HV0.2. X-ray diffraction analyses identified Fe3W3C, FeNi3, and (Fe, Ni) solid-solution phases formed during SPS. The results indicate that both the sintering temperature and binder composition influence densification, phase evolution, and mechanical performance. Among the investigated materials, the WC–Fe–Ni alloy showed better microstructural stability and hardness than the WC–Fe alloy. These findings suggest that Fe–Ni binders are promising candidates for cobalt-free cemented carbides, although additional studies on fracture toughness and wear resistance are required before practical cutting-tool applications can be fully assessed.
Keywords
Funding Information
- Ministry of Science and Higher Education of the Republic of Kazakhstan (BR24992925)
This publication has 53 references indexed in Scilit:
- Particle Size-Dependent Tribological Responses in WC-FeNiCrCu0.5 Coatings Sprayed by Supersonic Atmospheric Plasma SprayingJournal of Thermal Spray Technology, 2025
- Microstructure evolution and multi-scale performances of tungsten carbide-based composites with NbC, TaC, and (Ta,Nb)C additivesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2025
- Effects of multi-component cubic carbides TiC/TaC/NbC on the microstructural evolution and properties of ultrafine WC-Co cemented carbides via spark plasma sinteringCeramics International, 2025
- Effect of treatment process on CVD diamond coatings deposited on WC − Co substrate with different Co contentsDiamond and Related Materials, 2025
- L12 strengthening of WC-CoNiFe cemented carbides by spark plasma sinteringCeramics International, 2024
- Microstructure and mechanical properties of WC–TiC–Co cemented carbides produced by spark plasma sintering (SPS) methodSN Applied Sciences, 2023
- Research on Microstructure and Mechanical Performance of NbC and TiC on WC-12CoStrength of Materials, 2023
- Advances in Thermally Sprayed WC-Based Wear-Resistant Coatings: Co-free Binders, Processing Routes and Tribological BehaviorJournal of Thermal Spray Technology, 2022
- Surface phenomena during the early stage of liquid phase SPS of a mixture of coarse WC and Ni‐alloy particlesSurface and Interface Analysis, 2018
- Effect of Fe/Ni ratio on the microstructure and properties of WC-Fe-Ni-Co cemented carbidesCeramics International, 2018