Torque Density Improvement of Different Flat PMSM Topologies Using a Hybrid Optimization Method Considering End Effects and Shape Ratio Influence
- 24 October 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (2) , 1804-1815
Abstract
High torque density permanent magnet synchronous machines (PMSMs) are typically designed with large outer diameters and short stack lengths. This results in a large shape ratio (the ratio of outer diameter to stack length), which leads to significant end effects that can notably impact motor performance. To further improve the torque density of various flat PMSM topologies, end effects are first analyzed, including the contributions of end winding mass and end leakage flux. To accurately and efficiently account for these effects during the optimization process, a hybrid optimization method is established, which is based on the genetic algorithm and combines a 2-D finite element (FE) model and a parameterized 3-D equivalent magnetic circuit (EMC) model. The validity and superiority of the proposed hybrid method are demonstrated through comparisons with both 2-D and 3-D optimization approaches. Furthermore, the influences of shape ratio on torque densities of inner-rotor, outer-rotor, and dual-rotor PMSMs are comparatively studied using the hybrid method, taking into account varying torque requirements and thermal effects. Finally, a flat PMSM prototype is developed and tested to validate the end effect analysis and the effectiveness of the proposed torque density improvement approach.Keywords
Funding Information
- National Natural Science Foundation of China (U2141223)
- Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX24_0574)
- Funding for Outstanding Doctoral Dissertation in NUAA (BCXJ24-08)
- Nanjing University of Aeronautics and Astronautics PhD short-term visiting scholar project (241202DF03)
This publication has 25 references indexed in Scilit:
- Modeling of Uneven Air Gap Magnetic Field for Disc Planetary Permanent Magnet Machine With Segmented Gap Halbach ArrayIEEE Transactions on Energy Conversion, 2022
- Critical Review of Direct-Drive Electrical Machine Systems for Electric and Hybrid Electric VehiclesIEEE Transactions on Energy Conversion, 2022
- A Comparison between Axial and Radial Flux Permanent Magnet In-Wheel Motors for Electric Vehicle2020
- Consideration of 3-D end-effects of surface permanent - magnet synchronous-machines through 2-D finite-element analysis2019
- Impact of Rotor End Effects on FEM-Based Flux Mapping of Synchronous Reluctance MotorsIEEE Transactions on Industry Applications, 2018
- Influence of Pole Number and Stator Outer Diameter on Volume, Weight, and Cost of Superconducting Generators With Iron-Cored Rotor Topology for Wind TurbinesIEEE Transactions on Applied Superconductivity, 2017
- Influence of ratio of external diameter to stack length on torque and efficiency in outer rotor SPMSMs2015
- Calculation Methods and Effects of End-Winding Inductance and Permanent-Magnet End Flux on Performance Prediction of Nonoverlap Winding Permanent-Magnet MachinesIEEE Transactions on Industry Applications, 2013
- Three-Dimensional Lumped-Parameter Magnetic Circuit Analysis of Single-Phase Flux-Switching Permanent-Magnet MotorIEEE Transactions on Industry Applications, 2008
- A general approach to sizing and power density equations for comparison of electrical machines2002