Han Xue
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Han Xue has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Zhuoran Zhang
Nanjing University of Aeronautics and Astronautics
6 shared publications - Huamin Gao
Nanjing University of Aeronautics and Astronautics, Nanjing, China
5 shared publications - Ye Liu
Nanjing Normal University
5 shared publications Yuxi Hua
4 shared publicationsQiuyu Lin
3 shared publicationsChangzhou Lu
Center for More-Electric-Aircraft Power System, Nanjing University of Aeronautics and Astronautics, Nanjing, China
2 shared publications
Latest Publications
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (1) , 1141-1151
Electromagnetic and Thermal Influence of Aspect Ratio on Flat-Type High Torque Density Dual-Rotor Permanent Magnet Motor for Aircraft Electric Propulsion
To achieve high torque density in direct-drive permanent magnet propulsion motors, flat-type motor topologies with large outer diameters and short stack lengths are generally preferred. However, such flat motor designs may also lead to performance degradation due to the negative impacts of end-winding weight, end-leakage magnetic flux, and temperature rise. This article investigates the influence of aspect ratio (stack length to outer diameter ratio) on both electromagnetic and thermal performances of high torque density dual-rotor permanent magnet synchronous machines (PMSMs) for aircraft electric propulsion. First, the design essentials of the compact high torque density dual-rotor PMSM are described. Then, the influences of aspect ratio on electromagnetic performances are analyzed considering end effects under different torque demands. The motors are optimized through a genetic algorithm based on 2-D and quasi-3-D models, respectively, to either neglect or account for end-leakage flux, elucidating the necessity of considering end effects during the optimization and analysis process. Furthermore, the influences of aspect ratio on loss and temperature distributions in heat pipe cooling systems attached to either active or end windings are comparatively analyzed, indicating that excessively flat topologies lead to higher temperature rise. Finally, by comprehensively considering effects on electromagnetic and thermal performances, an appropriate aspect ratio is selected. A 100-kW flat-type dual-rotor PMSM with end-winding heat pipes is developed and tested to confirm the analysis.
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (1) , 1141-1151
Electromagnetic and Thermal Influence of Aspect Ratio on Flat-Type High Torque Density Dual-Rotor Permanent Magnet Motor for Aircraft Electric Propulsion
To achieve high torque density in direct-drive permanent magnet propulsion motors, flat-type motor topologies with large outer diameters and short stack lengths are generally preferred. However, such flat motor designs may also lead to performance degradation due to the negative impacts of end-winding weight, end-leakage magnetic flux, and temperature rise. This article investigates the influence of aspect ratio (stack length to outer diameter ratio) on both electromagnetic and thermal performances of high torque density dual-rotor permanent magnet synchronous machines (PMSMs) for aircraft electric propulsion. First, the design essentials of the compact high torque density dual-rotor PMSM are described. Then, the influences of aspect ratio on electromagnetic performances are analyzed considering end effects under different torque demands. The motors are optimized through a genetic algorithm based on 2-D and quasi-3-D models, respectively, to either neglect or account for end-leakage flux, elucidating the necessity of considering end effects during the optimization and analysis process. Furthermore, the influences of aspect ratio on loss and temperature distributions in heat pipe cooling systems attached to either active or end windings are comparatively analyzed, indicating that excessively flat topologies lead to higher temperature rise. Finally, by comprehensively considering effects on electromagnetic and thermal performances, an appropriate aspect ratio is selected. A 100-kW flat-type dual-rotor PMSM with end-winding heat pipes is developed and tested to confirm the analysis.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (2) , 1804-1815
Torque Density Improvement of Different Flat PMSM Topologies Using a Hybrid Optimization Method Considering End Effects and Shape Ratio Influence
High torque density permanent magnet synchronous machines (PMSMs) are typically designed with large outer diameters and short stack lengths. This results in a large shape ratio (the ratio of outer diameter to stack length), which leads to significant end effects that can notably impact motor performance. To further improve the torque density of various flat PMSM topologies, end effects are first analyzed, including the contributions of end winding mass and end leakage flux. To accurately and efficiently account for these effects during the optimization process, a hybrid optimization method is established, which is based on the genetic algorithm and combines a 2-D finite element (FE) model and a parameterized 3-D equivalent magnetic circuit (EMC) model. The validity and superiority of the proposed hybrid method are demonstrated through comparisons with both 2-D and 3-D optimization approaches. Furthermore, the influences of shape ratio on torque densities of inner-rotor, outer-rotor, and dual-rotor PMSMs are comparatively studied using the hybrid method, taking into account varying torque requirements and thermal effects. Finally, a flat PMSM prototype is developed and tested to validate the end effect analysis and the effectiveness of the proposed torque density improvement approach.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (2) , 1804-1815
Torque Density Improvement of Different Flat PMSM Topologies Using a Hybrid Optimization Method Considering End Effects and Shape Ratio Influence
High torque density permanent magnet synchronous machines (PMSMs) are typically designed with large outer diameters and short stack lengths. This results in a large shape ratio (the ratio of outer diameter to stack length), which leads to significant end effects that can notably impact motor performance. To further improve the torque density of various flat PMSM topologies, end effects are first analyzed, including the contributions of end winding mass and end leakage flux. To accurately and efficiently account for these effects during the optimization process, a hybrid optimization method is established, which is based on the genetic algorithm and combines a 2-D finite element (FE) model and a parameterized 3-D equivalent magnetic circuit (EMC) model. The validity and superiority of the proposed hybrid method are demonstrated through comparisons with both 2-D and 3-D optimization approaches. Furthermore, the influences of shape ratio on torque densities of inner-rotor, outer-rotor, and dual-rotor PMSMs are comparatively studied using the hybrid method, taking into account varying torque requirements and thermal effects. Finally, a flat PMSM prototype is developed and tested to validate the end effect analysis and the effectiveness of the proposed torque density improvement approach.
- 14 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (5) , 11030-11040
Analysis of Lightweight Dual-Rotor Yokeless-Stator PMSM for Electrified Aircraft Propulsion Considering Thermal Benefits of Heat Pipes
A lightweight dual-rotor yokeless-stator permanent magnet synchronous machine (PMSM) equipped with end-winding heat pipe cooling system is proposed for electrified aircraft propulsion application. The improvement in electromagnetic output performances is verified, and the critical challenge of limited surface area for axial cooling is addressed. First, the dual-rotor yokeless-stator motor topology, the end-winding heat pipe cooling method, and the integrated structural configuration are designed and illustrated based on the special requirements of aircraft propulsion systems. The motor is then optimized using multiobjective genetic algorithm (MOGA). The electromagnetic performances of the dual-rotor yokeless-stator PMSM are comprehensively analyzed and compared with the conventional outer-rotor PMSM, demonstrating prominent advantages in terms of compactness, torque density, overload capability, and efficiency. Furthermore, the thermal behaviors with end-winding or in-slot heat pipes are comparatively investigated, with a particular focus on the influence of stack length. The results affirm that the end-winding heat pipe system can realize efficient cooling for concentrated windings and is especially suitable for motors with compact structure. Finally, a 100-kW dual-rotor heat pipe cooled PMSM prototype is manufactured. Both electromagnetic and thermal tests validate the theoretical and simulation results.
- 14 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (5) , 11030-11040
Analysis of Lightweight Dual-Rotor Yokeless-Stator PMSM for Electrified Aircraft Propulsion Considering Thermal Benefits of Heat Pipes
A lightweight dual-rotor yokeless-stator permanent magnet synchronous machine (PMSM) equipped with end-winding heat pipe cooling system is proposed for electrified aircraft propulsion application. The improvement in electromagnetic output performances is verified, and the critical challenge of limited surface area for axial cooling is addressed. First, the dual-rotor yokeless-stator motor topology, the end-winding heat pipe cooling method, and the integrated structural configuration are designed and illustrated based on the special requirements of aircraft propulsion systems. The motor is then optimized using multiobjective genetic algorithm (MOGA). The electromagnetic performances of the dual-rotor yokeless-stator PMSM are comprehensively analyzed and compared with the conventional outer-rotor PMSM, demonstrating prominent advantages in terms of compactness, torque density, overload capability, and efficiency. Furthermore, the thermal behaviors with end-winding or in-slot heat pipes are comparatively investigated, with a particular focus on the influence of stack length. The results affirm that the end-winding heat pipe system can realize efficient cooling for concentrated windings and is especially suitable for motors with compact structure. Finally, a 100-kW dual-rotor heat pipe cooled PMSM prototype is manufactured. Both electromagnetic and thermal tests validate the theoretical and simulation results.
- 4 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (1) , 188-197
A Decoupled Flux Path Hybrid Excitation DC Generator Combining Direct-Drive Permanent Magnet and Geared Flux Modulation Machines
A decoupled flux path hybrid excitation generator (HEG) with a radially parallel structure is proposed and analyzed in this paper. In order to realize good voltage regulation capability and to improve the power density and compactness compared to traditional axially parallel HEGs, the direct-drive permanent magnet (PM) machine and the geared high-speed flux modulation machine are combined and radially integrated. The configuration and operating principles of the proposed HEG are presented. The no-load and the unique phase-shift characteristics are revealed and analyzed by finite-element analysis (FEA) and theoretical phaser diagrams. Moreover, the output performances and the short-circuit characteristics are studied, which shows great field regulation ability and antishort-circuit ability in a wide speed range. Furthermore, the energy flow and the loss and efficiency characteristics are illustrated. Finally, a 5-kW HEG prototype has been developed and tested. The experimental results validate both the theoretical and simulation analysis, indicating that the decoupled flux path HEG is promising for application in dc power generation systems of hybrid electric vehicles (HEVs).
- 4 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (1) , 188-197
A Decoupled Flux Path Hybrid Excitation DC Generator Combining Direct-Drive Permanent Magnet and Geared Flux Modulation Machines
A decoupled flux path hybrid excitation generator (HEG) with a radially parallel structure is proposed and analyzed in this paper. In order to realize good voltage regulation capability and to improve the power density and compactness compared to traditional axially parallel HEGs, the direct-drive permanent magnet (PM) machine and the geared high-speed flux modulation machine are combined and radially integrated. The configuration and operating principles of the proposed HEG are presented. The no-load and the unique phase-shift characteristics are revealed and analyzed by finite-element analysis (FEA) and theoretical phaser diagrams. Moreover, the output performances and the short-circuit characteristics are studied, which shows great field regulation ability and antishort-circuit ability in a wide speed range. Furthermore, the energy flow and the loss and efficiency characteristics are illustrated. Finally, a 5-kW HEG prototype has been developed and tested. The experimental results validate both the theoretical and simulation analysis, indicating that the decoupled flux path HEG is promising for application in dc power generation systems of hybrid electric vehicles (HEVs).