Efficient Finite Element Analysis/Computational Fluid Dynamics Thermal Coupling for Engineering Applications
- 5 April 2010
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 132 (3) , 031016
Abstract
An efficient finite element analysis/computational fluid dynamics (FEA/CFD) thermal coupling technique has been developed and demonstrated. The thermal coupling is achieved by an iterative procedure between FEA and CFD calculations. Communication between FEA and CFD calculations ensures continuity of temperature and heat flux. In the procedure, the FEA simulation is treated as unsteady for a given transient cycle. To speed up the thermal coupling, steady CFD calculations are employed, considering that fluid flow time scales are much shorter than those for the solid heat conduction and therefore the influence of unsteadiness in fluid regions is negligible. To facilitate the thermal coupling, the procedure is designed to allow a set of CFD models to be defined at key time points/intervals in the transient cycle and to be invoked during the coupling process at specified time points. To further enhance computational efficiency, a “frozen flow” or “energy equation only” coupling option was also developed, where only the energy equation is solved, while the flow is frozen in CFD simulation during the thermal coupling process for specified time intervals. This option has proven very useful in practice, as the flow is found to be unaffected by the thermal boundary conditions over certain time intervals. The FEA solver employed is an in-house code, and the coupling has been implemented for two different CFD solvers: a commercial code and an in-house code. Test cases include an industrial low pressure (LP) turbine and a high pressure (HP) compressor, with CFD modeling of the LP turbine disk cavity and the HP compressor drive cone cavity flows, respectively. Good agreement of wall temperatures with the industrial rig test data was observed. It is shown that the coupled solutions can be obtained in sufficiently short turn-around times (typically within a week) for use in design.Keywords
This publication has 13 references indexed in Scilit:
- Computational fluid dynamics for turbomachinery internal air systemsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2007
- Achieving high parallel performance for an unstructured unsteady turbomachinery CFD codeThe Aeronautical Journal, 2007
- The Use of CFD to Generate Heat Transfer Boundary Conditions for a Rotor-Stator Cavity in a Compressor Drum Thermal Model2007
- Transient Thermal and Flow Field in a Turbine Disk Rotor-Stator System2006
- A Non-Coupled CFD-FE Procedure to Evaluate Windage and Heat Transfer in Rotor-Stator Cavities2004
- Conjugate Calculations for a Film-Cooled Blade Under Different Operating Conditions2004
- Conjugate Heat Transfer Analysis for Film Cooling Configurations With Different Hole Geometries2003
- Conjugate Heat Transfer Analysis of Turbine Rotor-Stator System2002
- Conjugate Heat Transfer Analysis of Internally Cooled Configurations2001
- Flow and Heat Transfer in an Industrial Rotor-Stator Rim Sealing CavityJournal of Engineering for Gas Turbines and Power, 2000