Desirability function analysis approach for optimization of fused deposition modelling process parameters
- 1 October 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 114 (10-11) , 940-946
Abstract
This study uses desirability function analysis to optimize the process parameters namely layer thickness, fill pattern, fill density, and build orientation for fused deposition modelling on polyethylene terephthalate glycol material. The Taguchi-desirability function analysis is one of the optimization techniques for the multi-objective decision-making process. Taguchi L9 orthogonal array is employed in the test trials during the fused deposition modelling process. The output responses measured are dimension error, ductility, and tensile strength. The goal of process parameter optimization is to attain the best of the trials for minimal dimension error and maximum tensile strength and ductility. The best feasible amalgamation of input variables is discovered for the investigated and assessed response features utilizing desirability function analysis. As per the results obtained from experiments, it is concluded that the optimal combination of parameters is layer thickness of 0.1 mm, build orientation of 0°, fill density of 90 % and hexa fill pattern. By following this combination, the error in the dimensions was slightly increased which needed to be reduced, but both tensile strength and ductility were increased which are more desirable characteristics.Keywords
This publication has 18 references indexed in Scilit:
- A Study on Dimensional Accuracy of Fused Deposition Modeling (FDM) Processed Parts using Fuzzy LogicJournal for Manufacturing Science & Production, 2013
- An Adaptive Tool Path Generation for Fused Deposition ModelingAdvanced Materials Research, 2013
- Study of Mechanical Properties of Banana-Coir Hybrid Composite using Experimental and Fem TechniquesJournal of Mechanical Engineering and Sciences, 2013
- Surface roughness prediction in fused deposition modelling by neural networksThe International Journal of Advanced Manufacturing Technology, 2013
- Modelling micro geometrical profiles in fused deposition processThe International Journal of Advanced Manufacturing Technology, 2011
- Optimum part deposition orientation in fused deposition modelingInternational Journal of Machine Tools and Manufacture, 2004
- Slicing procedures in layered manufacturing: a reviewRapid Prototyping Journal, 2003
- Improvement of surface finish by staircase machining in fused deposition modelingJournal of Materials Processing Technology, 2003
- Critical parameters influencing the quality of prototypes in fused deposition modellingJournal of Materials Processing Technology, 2001
- Adaptive slicing using stepwise uniform refinementRapid Prototyping Journal, 1996