Hariprasad Tarigonda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hariprasad Tarigonda has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Krupakaran Radhakrishnan Lawrence
Department of Mechanical Engineering, Mohan Babu University, Tirupathi, Andhra Pradesh, India.
4 shared publications A. Gopalakrishna
Mechanical Engineering Department, JNTUK, Kakinada, India
3 shared publicationsR. Meenakshi Reddy
G. Pulla Reddy Engineering College
3 shared publications- Reddygari Meenakshi Reddy
G Pulla Reddy Engineering College, Kurnool, Affiliated to Jawaharlal Nehru Technological University Anantapur
3 shared publications B. Anjaneyulu
Srinivasa Ramanujan Institute of Technology
2 shared publicationsD. Raghu Rami Reddy
Mohan Babu University (Erstwhile: Sree Vidyanikethan Engineering College)
2 shared publications
Latest Publications
- 29 June 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (14) , 142501
Machine learning approaches for enhancing Paraffin based thermal energy storage systems: A Critical Review
Thermal Energy Storage (TES) systems integrated with phase change materials (PCMs) have emerged as promising solutions for improving energy efficiency and thermal management in sustainable energy applications. Among all the Paraffin-based PCMs have gained interest because of their high latent heats of fusion, chemical stability, non-corrosiveness, and ease of processing and mass production. Paraffin PCMs are very well suited for many thermal management applications. Despite many benefits, there are few limitations that hold back mass adoption. Some of these limits include low thermal conductivity, supercooling, phase-change leakage, and long-term degradation. These limitations have contributed to the slow adoption of PCM in TES systems. Recent developments in nano-engineering, advanced composite materials, and encapsulation technology have improved the performance of paraffin PCMs. The use of hybrid nano-additives greatly increases the thermal conductivity and use of microencapsulation prevents leakage while increasing structural stability. In parallel, machine learning (ML) approaches have emerged as effective tools for accelerating PCM material discovery, thermophysical property prediction, and TES system optimization with reduced experimental effort. This review critically examines recent developments in paraffin-based PCM technologies, emphasizing nano-enhancement strategies, encapsulation methods, ML-assisted prediction models, and emerging intelligent TES frameworks. Furthermore, the review discusses scalability challenges, sustainability concerns, and future research opportunities associated with advanced PCM systems for next-generation thermal energy storage applications.
- 29 June 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (14) , 142501
Machine learning approaches for enhancing Paraffin based thermal energy storage systems: A Critical Review
Thermal Energy Storage (TES) systems integrated with phase change materials (PCMs) have emerged as promising solutions for improving energy efficiency and thermal management in sustainable energy applications. Among all the Paraffin-based PCMs have gained interest because of their high latent heats of fusion, chemical stability, non-corrosiveness, and ease of processing and mass production. Paraffin PCMs are very well suited for many thermal management applications. Despite many benefits, there are few limitations that hold back mass adoption. Some of these limits include low thermal conductivity, supercooling, phase-change leakage, and long-term degradation. These limitations have contributed to the slow adoption of PCM in TES systems. Recent developments in nano-engineering, advanced composite materials, and encapsulation technology have improved the performance of paraffin PCMs. The use of hybrid nano-additives greatly increases the thermal conductivity and use of microencapsulation prevents leakage while increasing structural stability. In parallel, machine learning (ML) approaches have emerged as effective tools for accelerating PCM material discovery, thermophysical property prediction, and TES system optimization with reduced experimental effort. This review critically examines recent developments in paraffin-based PCM technologies, emphasizing nano-enhancement strategies, encapsulation methods, ML-assisted prediction models, and emerging intelligent TES frameworks. Furthermore, the review discusses scalability challenges, sustainability concerns, and future research opportunities associated with advanced PCM systems for next-generation thermal energy storage applications.
- Top Cited Papers
- 29 April 2025
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 46 (6) , 1-56
Recent Advances in Organic Phase Change Materials for Thermal Energy Storage: A Review on Sustainable Development Applications
- 29 April 2025
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 46 (6) , 1-56
Top Cited PapersRecent Advances in Organic Phase Change Materials for Thermal Energy Storage: A Review on Sustainable Development Applications
- Open Access
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Performance evaluation of low heat rejection diesel engine operated with biofuels under-selective catalytic reduction
Vehicle emissions are responsible for about 30% of all air pollution in the world. Vehicle emissions can be significantly reduced through the use of selective catalyst reduction (SCR). The present work emphasizes the impact of thermal barrier-coated pistons on diesel engine performance as well as emission qualities. A Ni–Cr–Al–Y bond coat was applied to the tested engine piston that was 50 microns thick and a top coat that was 250 microns thick. These coatings were applied using the plasma spray technique to a combination of 2 mol. % of Gadolinium oxide (Gd2O3), 2 mol. % of Neodymium oxide (Nd2O3), 3 mol. % of Yttria (Y2O3), and continuing 93 mol. % of Zirconia (ZrO2). In a 4-stroke, 1-cylinder diesel engine, the testing was carried out utilizing diesel, Mahua, and Jatropha fuels with and without coating. The selective catalytic reduction technique was employed in the current test to reduce NOx emissions. The findings of this analysis indicate that the brake thermal efficiency of an insulated piston engine improved by 3.9%, and when JB 100 was chosen as the fuel, the insulated piston reduced brake-specific fuel consumption by 3.5% in comparison to the normal piston. In engines coated with SCR, hydrocarbon emissions were lowered by 20.1%, while carbon monoxide emissions were dropped by 13.4%. In comparison to the baseline engine, the oxide of nitrogen emissions were reduced by 39.1%.
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Open AccessPerformance evaluation of low heat rejection diesel engine operated with biofuels under-selective catalytic reduction
Vehicle emissions are responsible for about 30% of all air pollution in the world. Vehicle emissions can be significantly reduced through the use of selective catalyst reduction (SCR). The present work emphasizes the impact of thermal barrier-coated pistons on diesel engine performance as well as emission qualities. A Ni–Cr–Al–Y bond coat was applied to the tested engine piston that was 50 microns thick and a top coat that was 250 microns thick. These coatings were applied using the plasma spray technique to a combination of 2 mol. % of Gadolinium oxide (Gd2O3), 2 mol. % of Neodymium oxide (Nd2O3), 3 mol. % of Yttria (Y2O3), and continuing 93 mol. % of Zirconia (ZrO2). In a 4-stroke, 1-cylinder diesel engine, the testing was carried out utilizing diesel, Mahua, and Jatropha fuels with and without coating. The selective catalytic reduction technique was employed in the current test to reduce NOx emissions. The findings of this analysis indicate that the brake thermal efficiency of an insulated piston engine improved by 3.9%, and when JB 100 was chosen as the fuel, the insulated piston reduced brake-specific fuel consumption by 3.5% in comparison to the normal piston. In engines coated with SCR, hydrocarbon emissions were lowered by 20.1%, while carbon monoxide emissions were dropped by 13.4%. In comparison to the baseline engine, the oxide of nitrogen emissions were reduced by 39.1%.
- 1 October 2023
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 114 (10-11) , 940-946
Desirability function analysis approach for optimization of fused deposition modelling process parameters
This study uses desirability function analysis to optimize the process parameters namely layer thickness, fill pattern, fill density, and build orientation for fused deposition modelling on polyethylene terephthalate glycol material. The Taguchi-desirability function analysis is one of the optimization techniques for the multi-objective decision-making process. Taguchi L9 orthogonal array is employed in the test trials during the fused deposition modelling process. The output responses measured are dimension error, ductility, and tensile strength. The goal of process parameter optimization is to attain the best of the trials for minimal dimension error and maximum tensile strength and ductility. The best feasible amalgamation of input variables is discovered for the investigated and assessed response features utilizing desirability function analysis. As per the results obtained from experiments, it is concluded that the optimal combination of parameters is layer thickness of 0.1 mm, build orientation of 0°, fill density of 90 % and hexa fill pattern. By following this combination, the error in the dimensions was slightly increased which needed to be reduced, but both tensile strength and ductility were increased which are more desirable characteristics.
- 1 October 2023
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 114 (10-11) , 940-946
Desirability function analysis approach for optimization of fused deposition modelling process parameters
This study uses desirability function analysis to optimize the process parameters namely layer thickness, fill pattern, fill density, and build orientation for fused deposition modelling on polyethylene terephthalate glycol material. The Taguchi-desirability function analysis is one of the optimization techniques for the multi-objective decision-making process. Taguchi L9 orthogonal array is employed in the test trials during the fused deposition modelling process. The output responses measured are dimension error, ductility, and tensile strength. The goal of process parameter optimization is to attain the best of the trials for minimal dimension error and maximum tensile strength and ductility. The best feasible amalgamation of input variables is discovered for the investigated and assessed response features utilizing desirability function analysis. As per the results obtained from experiments, it is concluded that the optimal combination of parameters is layer thickness of 0.1 mm, build orientation of 0°, fill density of 90 % and hexa fill pattern. By following this combination, the error in the dimensions was slightly increased which needed to be reduced, but both tensile strength and ductility were increased which are more desirable characteristics.
- Open Access
Optimization of Abrasive Water Jet Machining Process Parameters on Onyx Composite Followed by Additive Manufacturing
Fiber-reinforced additive manufacturing components have been used in various industrial applications in recent years, including in the production of aerospace, automobile, and biomedical components. Compared to conventional methods, additive manufacturing (AM) methods can be used to obtainin lighter parts with superior mechanical properties with lower setup costs and the ability to design more complex parts. Additionally, the fabrication of onyx composites using the conventional method can result in delamination, which is a significant issue during composite machining. To address these shortcomings, the fabrication of onyx composites via additive manufacturing with the Mark forged 3D-composite printer was considered. Machinability tests were conducted using abrasive water jet machining (AWJM) with various drilling diameters, traverse speeds, and abrasive mass flow rates. These parameters were optimized using Taguchi analysis and then validated using the Genetic algorithm (GA) and the Moth Flame Optimization algorithm (MFO). The surface morphology (Dmax) and the roughness of the drilled holes were determined using a vision measuring machine with 2D software (MITUTOYO v5.0) and a contact-type surface roughness tester. Confirmation testing demonstrated that the predicted values werenearly identical to the experimental standards. During the drilling of an onyx polymer composite, regression models, genetic algorithms and the Moth-Flame Optimization algorithm were used to estimate the response surface of delamination damage and surface roughness.
Open AccessOptimization of Abrasive Water Jet Machining Process Parameters on Onyx Composite Followed by Additive Manufacturing
Fiber-reinforced additive manufacturing components have been used in various industrial applications in recent years, including in the production of aerospace, automobile, and biomedical components. Compared to conventional methods, additive manufacturing (AM) methods can be used to obtainin lighter parts with superior mechanical properties with lower setup costs and the ability to design more complex parts. Additionally, the fabrication of onyx composites using the conventional method can result in delamination, which is a significant issue during composite machining. To address these shortcomings, the fabrication of onyx composites via additive manufacturing with the Mark forged 3D-composite printer was considered. Machinability tests were conducted using abrasive water jet machining (AWJM) with various drilling diameters, traverse speeds, and abrasive mass flow rates. These parameters were optimized using Taguchi analysis and then validated using the Genetic algorithm (GA) and the Moth Flame Optimization algorithm (MFO). The surface morphology (Dmax) and the roughness of the drilled holes were determined using a vision measuring machine with 2D software (MITUTOYO v5.0) and a contact-type surface roughness tester. Confirmation testing demonstrated that the predicted values werenearly identical to the experimental standards. During the drilling of an onyx polymer composite, regression models, genetic algorithms and the Moth-Flame Optimization algorithm were used to estimate the response surface of delamination damage and surface roughness.
- 27 May 2023
- Published by Elsevier in Materials Today: Proceedings
- Vol. 119, 230-236
Comparison of performance and emission characteristics of homogeneous charge compression ignition with conventional compression ignition engine
- 27 May 2023
- Published by Elsevier in Materials Today: Proceedings
- Vol. 119, 230-236
Comparison of performance and emission characteristics of homogeneous charge compression ignition with conventional compression ignition engine
- 28 March 2023
- Published by Springer Nature
- p. 510-531
Optimization of the Performance and Emissions of a Dual-Fuel Diesel Engine Using LPG as the Fuel
- 28 March 2023
- Published by Springer Nature
- p. 510-531
Optimization of the Performance and Emissions of a Dual-Fuel Diesel Engine Using LPG as the Fuel
- 23 December 2022
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
“Optimization of Operational Parameters on Engine Performance and Emissions of a Diesel Engine Powered with Mimusops Elengi Methyl Ester with Doped TiO2 Nanoparticle with Varying Injection Pressure”
- 23 December 2022
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
“Optimization of Operational Parameters on Engine Performance and Emissions of a Diesel Engine Powered with Mimusops Elengi Methyl Ester with Doped TiO2 Nanoparticle with Varying Injection Pressure”
- 12 August 2022
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 43 (10) , 1-16
Experimental Investigation on the Heat Pipe using Al2O3 and CuO Hybrid Nanofluid
- 12 August 2022
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 43 (10) , 1-16
Experimental Investigation on the Heat Pipe using Al2O3 and CuO Hybrid Nanofluid