Influence of Fiber Distribution and Orientation in the Fracture Behavior of Polyolefin Fiber-Reinforced Concrete
Open Access
Abstract
Polyolefin fiber-reinforced concrete (PFRC) has become an attractive alternative to steel for the reinforcement of concrete elements, mainly due to its chemical stability and the residual strengths that can be reached with lower weights. The use of polyolefin fibers can meet the requirements of standards, although the main constitutive relations are based on experience with steel fibers. Therefore, the structural contributions of the fibers should be assessed by inverse analysis. In this study, the fiber dosage was fixed at 6 kg/m3, and both self-compacting concrete and conventional concrete were used to compare the influence of the positioning of the fibers. An idealized homogeneous distribution of the fibers with such fibers crossing from side to side of the specimen was added to self-compacting concrete. The experimental results of three-point bending tests on notched specimens were reproduced by using the cohesive crack approach. Hence, constitutive relations were found. The significance of this research relies on the verification of the formulations found to build constitutive relations. Moreover, with these results, it is possible to establish a higher threshold for the performance of PFRC and the difficulties of limiting the first unloading branch typical of fracture tests of PFRC.Keywords
All Related Versions
Funding Information
- Ministerio de Asuntos Económicos y Transformación Digital, Gobierno de España (BIA2016-78742-C2-2-R)
This publication has 40 references indexed in Scilit:
- Hybrid short fiber reinforcement system in concrete: A reviewConstruction and Building Materials, 2017
- Comparison between polyolefin fibre reinforced vibrated conventional concrete and self-compacting concreteConstruction and Building Materials, 2015
- Polyolefin fiber-reinforced concrete enhanced with steel-hooked fibers in low proportionsMaterials & Design (1980-2015), 2014
- Plastic fibres as the only reinforcement for flat suspended slabs: Experimental investigation and numerical simulationConstruction and Building Materials, 2014
- On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concreteConstruction and Building Materials, 2014
- Flexural performance of fibre reinforced concrete made with steel and synthetic fibresConstruction and Building Materials, 2012
- Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concreteCement and Concrete Research, 2010
- Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineeringComposite Structures, 2008
- Comparative flexural behavior of four fiber reinforced cementitious compositesCement and Concrete Composites, 2008
- Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement CompositesJournal of Advanced Concrete Technology, 2003