Numerical investigation on the effect of injection pressure on the internal flow characteristics for diethyl ether, dimethyl ether and diesel fuel injectors using CFD
Authors:
- Thulasi VijayakumarTVThulasi Vijayakumar
- Karrupa Raj Rajagopal ThundilKTKarrupa Raj Rajagopal Thundil
- Kasianantham NanthagopalKNKasianantham Nanthagopal
Open Access
- 1 January 2011
- journal article
- Published by National Library of Serbia in Thermal Science
- Vol. 15 (4) , 1123-1130
Abstract
The spray characteristics of the diesel fuel are greatly affected by the cavitation formed inside the injector due to the high pressure differential across the nozzle. Many researchers across the globe are exploring the potential of using diethyl ether and dimethyl ether as an alternate for diesel fuel to meet the strict emission norms. Due to the variation in the fuel properties the internal flow characteristics in injectors for ether fuels are expected to be different from that of the diesel fuel. In this paper computational technique is used to study and compare the internal flow characteristics of diethyl ether, dimethyl ether and diesel fuel. The two phase flow model considering the fuel as a mixture of liquid and vapor is adopted for the simulation study. The injection pressure is varied from 100 to 400 bar and the flow characteristics of all three fuels are simulated and compared. Results indicate that all three fuels have distinct cavitating patterns owing to different property values. The dimethyl ether is found to be more cavitating than diesel and diethyl ether fuels as expected. The mass of fuel injected are found to be decreasing for the ether fuels when compared with diesel fuel at all injection pressures.Keywords
This publication has 9 references indexed in Scilit:
- Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditionsFuel, 2010
- Investigation of Nozzle Flow and Cavitation Characteristics in a Diesel InjectorJournal of Engineering for Gas Turbines and Power, 2010
- The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A reviewFuel, 2008
- Experimental investigation of nozzle cavitating flow characteristics for diesel and biodiesel fuelsInternational Journal of Automotive Technology, 2008
- Visualization of cavitation phenomena in a Diesel engine fuel injection nozzle by neutron radiographyNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2005
- Mathematical Basis and Validation of the Full Cavitation ModelJournal of Fluids Engineering, 2002
- Smokeless, Low NOx, High Thermal Efficiency, and Low Noise Diesel Combustion with Oxygenated Agents as Main FuelSAE International Journal of Advances and Current Practices in Mobility, 1998
- Engine Performance and Exhaust Characteristics of Direct-injection Diesel Engine Operated with DMESAE International Journal of Advances and Current Practices in Mobility, 1997
- Development of Fuel Injection Equipment and Combustion System for DI Diesels Operated on Dimethyl EtherSAE International Journal of Advances and Current Practices in Mobility, 1995