Alumina platelet reinforced reaction bonded aluminum oxide composites: Textured and random
Authors:
- 1 December 1997
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 12 (12) , 3300-3306
Abstract
The RBAO (Reaction Bonded Aluminum Oxide) process and water-based gel casting were combined to produce alumina platelet reinforced RBAO composites. In the RBAO process, a precursor powder mixture of Al metal and Al2O3 is reacted to form 100% ceramic. To obtain composites in which the platelets are highly aligned, tapes consisting of 10 vol.% homogeneously distributed alumina platelets and 90 vol.% RBAO precursor powder were made by water-based gel casting using an extended doctor blade arrangement. Pellets of textured composites were subsequently prepared by stacking sheets cut from the green tapes, and filter pressing. Randomly oriented platelet composites were made using the same starting powders and gelling procedure, but without the tape-casting step. Reaction bonding was carried out in a box furnace in air. Microstructures of the composites were characterized using x-ray diffraction (XRD) and scanning electron microscopy (SEM). The effect of platelet orientation on contact damage behavior was studied using a Hertzian indentation method. It was found that the textured composite exhibited improved damage resistance compared to the random composite.Keywords
This publication has 33 references indexed in Scilit:
- Damage-resistant alumina-based layer compositesJournal of Materials Research, 1996
- Contact Fatigue of a Silicon Carbide with a Heterogeneous Grain StructureJournal of the American Ceramic Society, 1995
- Reaction bonding of aluminum oxide (RBAO) composites: Processing, reaction mechanisms and propertiesJournal of the European Ceramic Society, 1994
- Mechanisms and Kinetics of Reaction‐Bonded Aluminum Oxide CeramicsJournal of the American Ceramic Society, 1993
- The Hertzian stress field and formation of cone cracks—II. Determination of fracture toughnessActa Metallurgica et Materialia, 1992
- The Hertzian stress field and formation of cone cracks—I. Theoretical approachActa Metallurgica et Materialia, 1992
- Fabrication and Properties of Low‐Shrinkage Reaction‐Bonded MulliteJournal of the American Ceramic Society, 1991
- Fabrication and properties of Al-infiltrated RBAO-based compositesJournal of the European Ceramic Society, 1991
- Tailoring of Reaction-Bonded Al2O3 (RBAO) Ceramics1990
- Low-shrinkage reaction-bonded aluminaJournal of the European Ceramic Society, 1989