Fretting Fatigue Performance of Ti6Al4V Dovetail Joints Under Dimple Surface Texturing
- 23 August 2026
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (11) , 4953-4965
Abstract
In this work, a specially designed test fixture was used to investigate the effect of dimple surface texturing on the fretting fatigue performance of a Ti6Al4V dovetail joint. The novel geometry of the fretting pair offered simultaneous investigation under cylinder‐on‐flat and flat‐on‐flat contact configurations. Tests were conducted using a servo‐hydraulic fatigue machine under an axial cyclic load of 11 kN, a stress ratio of 0.05, and a frequency of 10 Hz. The dimple surface textures having densities of 19.6%, 12.6%, and 8.7% were fabricated using laser surface texturing. Microscopic investigations were conducted using an optical microscope, a scanning electron microscope, and a three‐dimensional wear microscope. An enhanced fretting fatigue life was observed at the highest texture density of 19.6%, causing a delay in the crack initiation and reducing the crack growth. SEM revealed a large amount of wear debris, oxidation, spalling, and debris at the higher texture densities.Keywords
This publication has 31 references indexed in Scilit:
- Study on fretting wear and fatigue fracture of cast nickel-based superalloy K417G dovetail specimenEngineering Failure Analysis, 2025
- Evolution of fretting wear behavior of zirconium alloy cladding tube under gross slip regime in simulated primary water of pressurized water reactorJournal of Materials Science & Technology, 2024
- Fretting fatigue damage mechanism of Ti6Al4V dovetail joint specimens at high temperature treated with salt layerJournal of Alloys and Compounds, 2024
- Prediction of crack initiation and propagation during fretting corrosion of novel Ti6Al4V specimens in saline and physiological environmentsJournal of Mechanical Science and Technology, 2023
- Crack behavior of Ti-6Al-4V alloy combined conformal contact fretting, non-conformal contact fretting and simple fatigueInternational Journal of Fatigue, 2020
- Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A reviewJournal of Manufacturing Processes, 2020
- Fretting fatigue behaviors and surface integrity of Ag-TiN soft solid lubricating films on titanium alloyApplied Surface Science, 2019
- Fretting fatigue characteristics of Ti-6Al-4V alloy with a gradient nanostructured surface layer induced by ultrasonic surface rolling processInternational Journal of Fatigue, 2019
- Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail joint specimensInternational Journal of Fatigue, 2018
- Nucleation and early crack path in fretting fatigueInternational Journal of Fatigue, 2017