Abstract
Mine hoist is an important conveying large mechanical equipment, which mainly drives the steel wire rope to drive the container up and down in the shaft to complete the conveying task and is widely used in engineering. However, the performance change of wire rope has an important impact on the requirements and safety of the entire conveying task. This paper uses wavelet threshold method and SVD to denoise the signal, so as to study the monitoring data of six rope hoist after noise removal and the number, degree and location of all defects of six wire ropes after 10 round trips. The obtained signals are used to detect outliers, detect the number and location of defects, and determine the size and type of defects according to the definition of defects. Use Topsis method and entropy weight method to evaluate the safety performance of the rope, and discuss the influence of relevant parameters on the safety performance of the wire rope. According to the calculation, the safety performance of the second rope is the worst, and the safety performance of the fifth and sixth ropes is the best.