MAG welding of 960QL quenched and tempered steel
Open Access
- 1 August 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 591 (1)
Abstract
The article presents research of the welding technology of S960QL quenched and tempered steel with the thickness of 10 mm. The main problem during welding heat-treated fine-grained steels is cold cracking. The aim of the research was to develop welding technology of tested steel to obtain high ductility and strength properties of the joint and to avoid the problem of crack formation after welding process. For the test the butt joint was welded. For this it was used MAG process in the flat position. Welding process was carried out based on preliminary tests and pre-prepared Welding Procedure Specification according to ISO 15609-1 standard. During welding the M21 mixture was used as the shielding gas. As the filler metal a solid wire G Mn4Ni2.5CrMo was used. The welded joint was tested in accordance with the ISO 15614 standard requirements. The research included non-destructive tests and destructive tests. The non-destructive tests included visual, magnetic particle and radiographic tests. The destructive tests included transverse tensile, root and face bend, impact, macroscopic, microscopic and hardness. Impact test was carried out in the temperature of - 20°C. Hardness measurements were made using the Vickers method and the load of 9.80 N. All of the tests ended with the positive result. The results of research show that tested welding technology and pre-heating temperature equal to 80°C allow to obtain a welded joint meeting the high quality requirements and the international standards requirements.Keywords
This publication has 14 references indexed in Scilit:
- Disk Laser Welding of Armor Steel/ Spawanie Laserem Dyskowym Stali PancernejArchives of Metallurgy and Materials, 2014
- Welding of Thermomechanically Rolled Fine-Grain Steel by Different Types of Lasers/ Spawanie Stali Drobnoziarnistej Walcowanej Termomechanicznie Laserami Różnego TypuArchives of Metallurgy and Materials, 2014
- Study on Non-Metallic Inclusions in Laser-Welded TRIP-Aided Nb-Microalloyed SteelArchives of Metallurgy and Materials, 2014
- Changes in the Structure and Properties of the Steel S700MC by Heat TreatmentAdvanced Materials Research, 2014
- Microstructure Characterization of Laser-Welded Nb-Microalloyed Silicon-Aluminum TRIP SteelJournal of Materials Engineering and Performance, 2014
- Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of Nb-Ti-V Microalloyed SteelJournal of Materials Engineering and Performance, 2014
- Weldability of high strength steels in wet welding conditionsPolish Maritime Research, 2013
- Evaluation of high strength TMCP steel weld for use in cold regionsJournal of Constructional Steel Research, 2012
- Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steelMetallurgical and Materials Transactions A, 2001
- The Effect of Vanadium and Niobium on the Properties and Microstructure of the Intercritically Reheated Coarse Grained Heat Affected Zone in Low Carbon Microalloyed Steels.ISIJ International, 2001