Predictable Auxiliary Switching Strategy to Improve Unloading Transient Response Performance for DC–DC Buck Converter
Authors:
- 22 January 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 49 (2) , 931-941
Abstract
In this paper, a novel control strategy is presented, which is capable of controlling a 12-V-1.5-V main buck converter and an auxiliary circuit to achieve significantly improved unloading response performance. While the charge balance controller minimizes the settling time of the main buck converter, the auxiliary circuit is controlled in boundary conduction mode (BCM) for a predictable pattern of auxiliary switching to reduce the output overshoot. Therefore, the reliability and dynamic performance of the entire system is significantly enhanced. Compared with existing technologies, the proposed BCM auxiliary switching strategy achieves improved output voltage overshoot and reduced auxiliary power losses at the same time. Furthermore, numerical analysis of the improved output voltage overshoot and reduced auxiliary power losses has been conducted for a design guideline. Finally, simulation and experimental results are provided to verify the proposed scheme on a 12-V-1.5-V 10-A buck converter prototype.Keywords
This publication has 18 references indexed in Scilit:
- Performance enhancement with digital control technologies for dc-dc switching converters2010
- Controlled Auxiliary Circuit to Improve the Unloading Transient Response of Buck ConvertersIEEE Transactions on Power Electronics, 2009
- Fast Load Transient Regulation of Low-Voltage Converters with the Low-Voltage Transient ProcessorIEEE Transactions on Power Electronics, 2009
- A Buck-Derived Topology With Improved Step-Down Transient PerformanceIEEE Transactions on Power Electronics, 2008
- Continuous-Time Digital Controller for High-Frequency DC-DC ConvertersIEEE Transactions on Power Electronics, 2008
- A Comparative Study of Boundary Control With First- and Second-Order Switching Surfaces for Buck Converters Operating in DCMIEEE Transactions on Power Electronics, 2007
- The Fast Response Double Buck DC–DC Converter (FRDB): Operation and Output Filter InfluenceIEEE Transactions on Power Electronics, 2005
- Two-Stage Approach for 12-V VRIEEE Transactions on Power Electronics, 2004
- A two stage voltage regulator module with fast transient response capability2004
- Minimum time control of a buck converter by means of fuzzy logic approximation2002