Characterization of Anodized Ti-Based Alloys: Wettability, Corrosion Resistance, and Biomechanical Performance
Open Access
- 17 December 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 213508-213522
Abstract
This study explores electrochemical and biomechanical properties of five Titanium based alloys, namely pure Titanium, Ti6Al4V, and experimentally developed Ti-10Nb-10Zr-5Ta, Ti-20Nb-20Zr-4Ta, and Ti-29.3Nb-13.6Zr-1.9Fe alloys. The wettability, biocompatibility, and corrosion measurements were performed after electrochemical anodization of the surfaces. The experimental alloys exhibited lower initial ground surface contact angles compared to the commonly used Ti-6Al-4V alloy—anodization in aqueous and organic electrolytes produced nanoporous/nanotubular morphologies, significantly enhancing surface wettability. The Ti-20Nb-20Zr-4Ta alloy anodized in an ethylene glycol-based electrolyte at 60 V demonstrated the best hydrophilic properties, with a contact angle of 52.76 ± 3.90°, notably lower than the 86.06 ± 3.92° of the control Ti-6Al-4V alloy. Electrochemical measurements were carried out to evaluate the corrosion resistance of the metallic alloys in chloride-containing solutions. The results obtained and presented here contribute to the development of Titanium based alloys for biomedical applications, enhancing the current scientific literature.Keywords
This publication has 47 references indexed in Scilit:
- Tribological Behavior and In‐Vitro Biocompatibility of a Newly Designed TiZrNbMoTa High‐Entropy AlloyAdvanced Engineering Materials, 2024
- Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectivesBioactive Materials, 2021
- Corrosion of the Filled Skutterudite Sm0.1(Fe0.45Ni0.55)4Sb12 by NaCl Solutions: An Electrochemical StudyJournal of Electronic Materials, 2020
- Osteogenic Nanofibrous Coated Titanium Implant Results in Enhanced Osseointegration: In Vivo Preliminary Study in a Rabbit ModelTissue Engineering and Regenerative Medicine, 2018
- A review on the wettability of dental implant surfaces II: Biological and clinical aspectsActa Biomaterialia, 2014
- Contact Angle and Wetting Properties2013
- TiO2 Nanotubes: Synthesis and ApplicationsAngewandte Chemie International Edition, 2011
- Impedance Spectroscopy2005
- A flexible procedure for analyzing impedance spectroscopy results: Description and illustrationsSolid State Ionics, 1987
- A Nonlinear Least Squares Fit procedure for analysis of immittance data of electrochemical systemsSolid State Ionics, 1986