Impact of determination method and sample type on basic wood density analysis and its implications for Eucalyptus pulp production
Authors:
- Bruno Sangali ArantesBABruno Sangali Arantes
- Aguinaldo José de SouzaASAguinaldo José de Souza
- Izabel Christina Gava de SouzaISIzabel Christina Gava de Souza
- Vaniele Bento dos SantosVSVaniele Bento dos Santos
- Sâmara Magdalene Vieira NunesSNSâmara Magdalene Vieira Nunes
- Thayanne Caroline Castor NetoTNThayanne Caroline Castor Neto
- Michel Picanço OliveiraMichel Picanço Oliveira
- Graziela Baptista VidaurreGVGraziela Baptista Vidaurre
Open Access
- 22 August 2025
- journal article
- research article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 79 (11) , 612-626
Abstract
Basic wood density is vital for forest-based industries, especially pulp production. However, sample saturation time before analysis poses challenges, with variations in sample types and methods leading to inconsistencies. This study evaluated the impact of different methods, sample types, and saturation parameters on Eucalyptus basic wood density and pulp industry metrics. Five Eucalyptus clones ( E. grandis , E. urophylla , and hybrids) from a São Paulo experimental plot were analyzed. Samples included discs and wood chips collected along the commercial stem. Basic density was determined using the hydrostatic balance method, while chips were also analyzed via the maximum moisture content method. Saturation methods significantly influenced density values, with differences of up to 28 kg/m 3 . Tests 2 and 3 reduced saturation time to 6 days versus 9–15 days for other methods. Density differences between wedges and chips appeared only in clone C2, with variations up to 11 kg m 3 . Saturation methods affected wood consumption predictions, ranging from 2 to 263 m 3 /ton of air-dried pulp. Test 3 (vacuum, pressure, and 100 °C) was the most efficient. Findings highlight that sample type, saturation, and methods influence basic density variability, directly impacting pulp production efficiency.Keywords
Funding Information
- CNPq (Call No. 12/2020)
This publication has 11 references indexed in Scilit:
- TAMANHO AMOSTRAL PARA A ESTIMATIVA DA DENSIDADE BÁSICA EM UM CLONE HÍBRIDO DE Eucalyptus spRevista do Instituto Florestal, 2015
- Köppen's climate classification map for BrazilMeteorologische Zeitschrift, 2013
- Quality of wood and pulp from a clone of Eucalyptus grandis planted at three locationsCERNE, 2011
- Análise de critérios de qualidade da madeira de eucalipto para produção de celulose kraftRevista Árvore, 2010
- Eucalyptus wood quality and its impact on kraft pulp production and useTAPPI Journal, 2009
- Predição de qualidade da madeira e da polpa celulósica por técnica de espectroscopia de infravermelho próximo (NIRS)Revista Árvore, 2009
- Influence of Lignin Structural Features on Eucalyptus globulus Kraft PulpingIndustrial & Engineering Chemistry Research, 2008
- Caracterização tecnológica, para produção de celulose, da nova geração de clones de Eucalyptus do BrasilRevista Árvore, 2005
- Variação do teor de umidade e da densidade básica na madeira de sete espécies de eucaliptoRevista Árvore, 2005
- Wood Variation1989