SNSâmara Magdalene Vieira Nunes

Sâmara Magdalene Vieira Nunes

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sâmara Magdalene Vieira Nunes has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Estimation of basic wood density of eucalyptus using non-destructive methods

    by Érica Patrícia Pinto Queiroz, Bruno Sangali Arantes, Sâmara Magdalene Vieira Nunes, Aguinaldo José de Souza, Renata Guilherme Cândido da Silva, Thayanne Caroline Castor Neto, Bruno Duarte Lourenço de Araújo, Glaycianne Christine Vieira dos Santos Ataide, Paulo Ricardo Gherardi Hein, João Gabriel Missia da Silva, et al.

    The traditional estimation of basic wood density is time- and resource-intensive, limiting broader sampling in eucalyptus plantations. This study evaluated the accuracy of non-destructive methods and developed predictive models using Linear Mixed Models (LMM). Five eucalyptus clones, aged 6.6 to 7.2 years, from three sites were analyzed. Discs collected at various heights were used for basic density determination by destructive methods. Among the non-destructive techniques, NIR spectroscopy showed the highest accuracy, with no significant difference between observed and predicted values, followed by Pilodyn, which differed by only 1 kg m −3 . The Increment Borer method did not produce reliable models. Genetic material and growth site significantly influenced the accuracy of the methods, emphasizing the need to include these variables in predictive models. The adjusted LMMs confirmed that integrating genetic and site factors enhances estimation robustness. NIR emerged as the most reliable method, while Pilodyn presents a practical field alternative. Future work should expand datasets to incorporate more genetic variations, growth conditions, and tree ages to improve model calibration.

  • Open Access

    Performance of Eucalyptus clones in growth and wood quality under contrasting climatic conditions for kraft pulp production

    by Sâmara Magdalene Vieira Nunes, Stéffany Lima Araujo, Vaniele Bento dos Santos, Thayanne Caroline Castor Neto, Renata Guilherme Candido da Silva, Érica Patrícia Pinto Queiroz, Bruno Sangali Arantes, Aguinaldo José de Sousa, Jorge Gominho, Ana Lourenço, et al.

    This study evaluated how contrasting climatic conditions across three sites in Brazil affect growth, basic density, and wood chemical composition of five young Eucalyptus clones. Analyses included mean annual increment, biomass production, basic density, extractives content, total lignin, hemicellulose, alpha-cellulose, ash content, and the syringyl-to-guaiacyl (S/G) lignin ratio. Higher water availability at the SP site (lowest water deficit) and the BA site (intermediate water availability) promoted greater wood biomass accumulation, whereas the environment with the highest water deficit (MA) resulted in increased basic density. The responses of chemical traits were dependent on the genetic material, with extractives content being the most unstable variable across environments. Among climatic variables, only temperature was positively correlated with basic density, which influenced the specific wood consumption (SWC), showing an inverse relationship with basic density. The results indicate that genetic improvement programs may help reduce variability in the most sensitive properties (particularly extractives), thereby decreasing environmental heterogeneity that can compromise the predictability of kraft pulping performance.

  • Open Access

    Effect of contrasting climatic conditions in Brazil on heartwood and sapwood production and chemistry in young Eucalyptus clones

    by Sâmara Magdalene Vieira Nunes, Stéffany Lima Araujo, Gustavo Jaske da Conceição, Thayanne Caroline Castor Neto, Gabriela Goldner Gimenez, Yasmin Aparecida de Oliveira Figueiredo, Renata Guilherme Candido da Silva, Aguinaldo José de Sousa, Jorge Gominho, Ana Lourenço, et al.


  • Amplitude da densidade da madeira entre árvores amostradas de Eucalyptus e Corymbia no Brasil: uma revisão de literatura

    by Stéffany de Lima Araujo, Sâmara Magdalene Vieira Nunes, Vaniele Bento dos Santos, Thayanne Caroline Castor Neto, Gustavo Jaske da Conceição, Renata Guilherme Cândido da Silva, Osmarino Pires dos Santos, Aguinaldo José de Souza, Paulo Henrique Muller da Silva, Graziela Baptista Vidaurre

    RESUMO A densidade básica da madeira varia entre espécies e indivíduos, influenciada por fatores como condições ambientais, material genético, manejo silvicultural e idade de corte. O objetivo deste trabalho foi analisar a variabilidade da densidade básica da madeira entre árvores de clones e espécies de Eucalyptus e Corymbia, utilizando dados da literatura e considerando diferentes idades e posições de amostragem ao longo do fuste. Um banco de dados com estudos conduzidos entre 2015 e 2024 sobre a qualidade da madeira dessas espécies foi analisado. A amplitude da densidade básica foi determinada a partir da diferença entre o maior e o menor valor de densidade básica obtido em cada posição amostral entre as árvores de cada material genético avaliado. Os resultados indicaram que a maior variação ocorreu para o gênero Corymbia aos 6 anos (87 Kg m⁻³), seguido por Eucalyptus aos 8 anos (64 Kg m⁻³). Entre as espécies de origem clonal, Eucalyptus saligna apresentou a maior amplitude entre árvores (47 Kg m⁻³), enquanto o híbrido Eucalyptus grandis x Eucalyptus camaldulensis exibiu a menor (19 Kg m⁻³). No que se refere às posições de amostragem ao longo do fuste, as maiores variações ocorreram nas posições correspondentes a 33 e 66% da altura comercial. Para as espécies de Corymbia, a amplitude da densidade básica entre árvores foi maior nas regiões basais, com tendência à homogeneização dos valores a partir da metade do fuste até o topo. Assim, o conhecimento sobre a amplitude da densidade básica entre árvores amostradas é fundamental para aprimorar estratégias de amostragem, permitindo reduzir coletas extensivas e aumentar a representatividade das estimativas da densidade básica ao longo do fuste.

  • A densidade básica aritmética difere da ponderada em madeiras de eucalipto?

    by Stéffany de Lima Araujo, Sâmara Magdalene Vieira Nunes, Érica Patrícia Pinto Queiroz, Renata Guilherme Cândido da Silva, Vaniele Bento dos Santos, João Gabriel Missia da Silva, Aguinaldo José de Souza, Osmarino Pires dos Santos, Paulo Henrique Muller da Silva, Graziela Baptista Vidaurre

    RESUMO A densidade é uma característica essencial na avaliação da qualidade da madeira, variando significativamente entre espécies, indivíduos e ao longo do fuste. O objetivo do trabalho foi verificar a diferença entre os resultados obtidos com a densidade básica média aritmética e ponderada em clones e espécies de Eucalyptus e Corymbia em diferentes idades e sítios no Brasil, utilizando um banco de dados de pesquisas realizadas entre os anos de 2015 e 2024. As amostras foram classificadas por idade e espécie. A densidade básica foi determinada pelo método da balança hidrostática em todas as amostras. Os dados foram submetidos ao teste t para amostras pareadas para verificação da diferença entre a densidade básica média aritmética e ponderada. A densidade básica média aritmética das madeiras de Eucalyptus variou de 360 a 609 Kg.m⁻³ e de Corymbia, de 513 a 677 Kg.m⁻³. Já a densidade ponderada pelo volume apresentou intervalo de 350 a 612 Kg.m⁻³ e 513 a 678 Kg.m⁻³, para Eucalyptus e Corymbia, respectivamente. Para a maioria das espécies de Corymbia, não houve diferença significativa entre a densidade básica média aritmética e ponderada. Dentre as espécies de eucalipto avaliadas, 50% apresentaram diferenças significativas entre as metodologias utilizadas, enquanto a outra metade não evidenciou tal discrepância. A depender da idade, a densidade básica aritmética difere da ponderada em madeiras de eucalipto. Os resultados corroboram com a aplicabilidade da densidade básica média aritmética como uma abordagem simplificada e eficaz, especialmente quando a cubagem rigorosa do fuste não é viável.

  • Open Access

    Impact of determination method and sample type on basic wood density analysis and its implications for Eucalyptus pulp production

    by Bruno Sangali Arantes, Aguinaldo José de Souza, Renata Guilherme Cândido da Silva, Izabel Christina Gava de Souza, Vaniele Bento dos Santos, Sâmara Magdalene Vieira Nunes, Érica Patrícia Pinto Queiroz, Thayanne Caroline Castor Neto, Michel Picanço Oliveira, Graziela Baptista Vidaurre

    Basic wood density is vital for forest-based industries, especially pulp production. However, sample saturation time before analysis poses challenges, with variations in sample types and methods leading to inconsistencies. This study evaluated the impact of different methods, sample types, and saturation parameters on Eucalyptus basic wood density and pulp industry metrics. Five Eucalyptus clones ( E. grandis , E. urophylla , and hybrids) from a São Paulo experimental plot were analyzed. Samples included discs and wood chips collected along the commercial stem. Basic density was determined using the hydrostatic balance method, while chips were also analyzed via the maximum moisture content method. Saturation methods significantly influenced density values, with differences of up to 28 kg/m 3 . Tests 2 and 3 reduced saturation time to 6 days versus 9–15 days for other methods. Density differences between wedges and chips appeared only in clone C2, with variations up to 11 kg m 3 . Saturation methods affected wood consumption predictions, ranging from 2 to 263 m 3 /ton of air-dried pulp. Test 3 (vacuum, pressure, and 100 °C) was the most efficient. Findings highlight that sample type, saturation, and methods influence basic density variability, directly impacting pulp production efficiency.


  • NIR-based models for the evaluation of basic density, moisture and higher heating value of industrial wood chips

    by Sâmara Magdalene Vieira Nunes, Thalles Loiola Dias, Talita Baldin, Edy Eime Pereira Baraúna, Paulo Ricardo Gherardi Hein


  • Open Access

    Potential of lignocellulosic materials (wood and bark) from Ateleia glazioviana and Hovenia dulcis as a natural wood preservative

    by M. Talgatti, T. Baldin, S. M. V. Nunes, T. L. Dias, E. E. P. Baraúna, E. J. Santini, G. Valcorte, R. R. Roubuste, P. D. C. Silva

    The lignocellulosic materials of some plant species are rich in chemical compounds that can serve as a source of natural and environmentally less aggressive biocides for treating wood. The aim of this study was to verify the potential of the lignocellulosic materials (wood and bark) of Ateleia glazioviana and Hovenia dulcis as a natural wood preservative. The extracts were prepared by heating the materials to 100 °C at a concentration of 10%. The wood samples were treated in a laboratory autoclave using the empty cell method. Control samples (untreated) and samples treated with chromated copper borate - CCB (2.5%) were used as a comparison. The accelerated rot test in the laboratory was carried out using a sample of the colony of the white rot fungus, Trametes versicolor. Mass loss, solubility in 1% NaOH, scanning electron spectroscopy (SEM) and attenuated total reflection infrared spectroscopy (ATR-FTIR) were evaluated. A rotting field test was also carried out in a forest fragment for 180 days and the mass loss, apparent specific mass, ATR-FTIR, and dynamic bending of the wood samples were evaluated. In laboratory tests, natural extractive solutions from the bark and wood of Hovenia dulcis and only from the bark of Ateleia glazioviana have fungitoxic potential against the white rot fungus, when compared to material without preservative impregnations. The resistance of the wood in the field to rot did not obtain significant results with the application of the natural preservatives, and future studies will need to increase the concentration of the extracts in an attempt to improve their performance as natural biocides.

  • Open Access

    Ecological anatomy of wood from Guarea kunthiana A. Juss. (Meliaceae)

    by Talita Baldin, Sâmara Magdalene Vieira Nunes, Emmyle Katterine Souza Santos, Thalles Loiola Dias, Edy Eime Pereira Barauna, Silvana Nisgoski

    Light and water availability are determining factors for variations in the anatomical and morphological characteristics of wood. In view of the above, the aim of this work was to carry out an anatomical-ecological analysis of the wood and leaf morphology of Guarea kunthiana A. Juss. (Meliaceae), occurring in the Cavernas do Peruaçu National Park (MG), to understand the plant-environment interactions and how these interactions affect the anatomical characteristics of the wood. For this purpose, three trees were selected considering the difference in botanical patterns of leaves and tree size, the distance to the watercourse that enters the cave and the incidence of light on them. Wood was collected from each sample nondestructively at DAP, from leaves at random heights and from light intensity. Anatomical characterization was then carried out using histological and macerate slides. To compare the morphological aspects of the leaves, the blade length, blade width, length/width ratio and blade area (A²) were determined. All characters were correlated using Spearman analysis to verify the influence of the environment on wood anatomy. The anatomical components found are common to the genus and family; proximity to watercourses has a greater influence on the number of anatomical elements than does light intensity. There is a strong association between leaf blade area and wood anatomy. It is concluded that the G. Kunthiana has anatomical adaptations for mesomorphic environments.

  • Open Access

    BIOPRESERVANTES OBTIDOS DAS FOLHAS DE CORYMBIA CITRIODORA PARA A PRESERVAÇÃO DA MADEIRA DE EUCALYPTUS SP.

    by Silvia Tereza Alves Evaristo, Talita Baldin, Patrick da Cruz Silva, Sâmara Magdalene Vieira Nunes, Edy Eime Pereira Baraúna, Fernando Colen