A Transient Mixed Elastohydrodynamic Lubrication Model for Helical Gear Contacts
- 27 October 2020
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 143 (6) , 1-27
Abstract
In this study, a non-Newtonian, transient, isothermal, mixed elastohydrodynamic lubrication (EHL) model is proposed for helical gear contacts. The model accounts for nonelliptical contacts subject to spatially varying sliding and rolling velocity fields that are not aligned with any principal axis of the contact region, which is the case for helical gear contacts. The time-varying changes pertaining to key contact parameters and relative motion of roughness profiles on mating tooth surfaces are captured simultaneously to follow the contact from the root to the tip of a tooth while accounting for the transient effect due to relative motions of the roughness profiles. Actual tooth load distributions, contact kinematics, and compliances of helical gear contacts are provided to this model by an existing helical gear load distribution model. Measured three-dimensional roughness profiles covering the entire meshing zone are incorporated in the analyses to investigate its impact on the EHL conditions as well as mechanical power loss. Results of a parametric sensitivity study are presented to demonstrate the influence of operating conditions and surface roughness on the EHL behavior and the resultant gear mesh mechanical power loss of an example helical gear pair. The accuracy of the proposed mixed-EHL model is assessed by comparing the mechanical power loss predictions to available experimental results.Keywords
Funding Information
- Wright State University
- Ohio State University
This publication has 37 references indexed in Scilit:
- A tribo-dynamic model of a spur gear pairJournal of Sound and Vibration, 2013
- A model to predict scuffing failures of a ball-on-disk contactTribology International, 2013
- Micro-pitting fatigue lives of lubricated point contacts: Experiments and model validationInternational Journal of Fatigue, 2013
- A physics-based model to predict micro-pitting lives of lubricated point contactsInternational Journal of Fatigue, 2013
- A Fatigue Model for Spur Gear Contacts Operating Under Mixed Elastohydrodynamic Lubrication ConditionsJournal of Mechanical Design, 2012
- A Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic LubricationJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2011
- A mixed EHL model with asymmetric integrated control volume discretizationTribology International, 2009
- Influence of Design Parameters on Mechanical Power Losses of Helical Gear PairsJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2009
- Prediction of Mechanical Efficiency of Parallel-Axis Gear PairsJournal of Mechanical Design, 2006
- Determination of power losses in gear transmissions with rolling and sliding friction incorporatedMechanism and Machine Theory, 2002