Vibration Welding Nylon 66 - Part I Experimental Study
Authors:
- 1 March 2003
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 16 (2) , 101-119
Abstract
The strengths and failure mechanisms of vibration welded joints were studied using a central composite design of experiment. The experimental study focused on three aspects: material, joint geometry and welding process effects. Butt joints, T-joints and cup-plaque joints were made using unreinforced nylon 66 and 33% short glass fiber reinforced nylon 66. Reinforced nylon 66 exhibited lower butt and T-joint strengths than unreinforced nylon 66. Analyses of the fracture surface suggest that the lower strength for the reinforced compound is related to glass fiber bundling and orientation effects. Weld pressure appears to play the largest role in determining joint strength; lower pressure results in higher strengths. Although the nominal tensile stress on these joint geometries has been shown to be a useful screening tool, a more detailed mechanical analysis is required to understand the complex stress field existing in T- and cup-plaque joints. Such an analysis should allow a better design of real joints on industrial parts.Keywords
This publication has 10 references indexed in Scilit:
- The vibration and hot‐tool welding of polyamidesPolymer Engineering & Science, 2001
- Vibration welding of glass-filled poly(styrene-co-maleic anhydride)Journal of Adhesion Science and Technology, 2001
- The vibration welding of polycarbonate/acrylonitrile‐butadiene‐styrene blends to themselves and to other resins and blendsPolymer Engineering & Science, 2000
- Assessment of geometries for determining strengths of thermoplastic vibration weldsJournal of Materials Science, 2000
- Friction welding of polyamidesPolymer Engineering & Science, 1997
- The Vibration Welding of Polyamide 66Journal of Thermoplastic Composite Materials, 1993
- Vibration welding of ABS to itself and to polycarbonate, poly(butylene terephthalate), poly(ether imide) and modified poly(phenylene oxide)Polymer, 1993
- Strength and bonding mechanisms in vibration‐welded polycarbonate to polyetherimide jointsPolymer Engineering & Science, 1989
- Vibration welding of thermoplastics. Part IV: Strengths of poly(butylene terephthalate), polyetherimide, and modified polyphenylene oxide butt weldsPolymer Engineering & Science, 1988
- Vibration welding of thermoplastics. Part II: Analysis of the welding processPolymer Engineering & Science, 1988