Cleavage Fracture of the Air Cooled Medium Carbon Microalloyed Forging Steels with Heterogeneous Microstructures
Open Access
Abstract
Cleavage fracture of the V and Ti-V microalloyed forging steels was investigated by the four-point bending testing of the notched specimens of Griffith-Owen’s type at −196 °C, in conjunction with the finite element analysis and the fractographic examination by scanning electron microscopy. To assess the mixed microstructure consisting mostly of the acicular ferrite, alongside proeutectoid ferrite grains and pearlite, the samples were held at 1250 °C for 30 min and subsequently cooled instill air. Cleavage fracture was initiated in the matrix under the high plastic strains near the notch root of the four-point bending specimens without the participation of the second phase particles in the process. Estimated values of the effective surface energy for the V and the Ti-V microalloyed steel of 37 Jm−2 and 74 Jm−2, respectively, and the related increase of local critical fracture stress were attributed to the increased content of the acicular ferrite. It was concluded that the observed increase of the local stress for cleavage crack propagation through the matrix was due to the increased number of the high angle boundaries, but also that the acicular ferrite affects the cleavage fracture mechanism by its characteristic stress–strain response with relatively low yield strength and considerable ductility at −196 °C.Keywords
Funding Information
- Ministarstvo Prosvete, Nauke i Tehnološkog Razvoja (Contract No. 451-03-9/2021-14/200135)
This publication has 49 references indexed in Scilit:
- Cleavage initiation in steel: Competition between large grains and large particlesMaterials Science and Engineering: A, 2013
- Intragranular ferrite morphologies in medium carbon vanadium-microalloyed steelJournal of Mining and Metallurgy, Section B: Metallurgy, 2013
- Fiji: an open-source platform for biological-image analysisNature Methods, 2012
- Effect of cooling rate on the microstructure and mechanical properties of microalloyed forging steelJournal of Materials Processing Technology, 2008
- The mechanism of acicular ferrite in weld depositsCurrent Opinion in Solid State and Materials Science, 2004
- Ferrite nucleation potency of non-metallic inclusions in medium carbon steelsActa Materialia, 2001
- Ferrite Nucleation at Ceramic/Austenite Interfaces.ISIJ International, 1996
- Cleavage fracture of microalloyed forging steelsScripta Metallurgica et Materialia, 1995
- Improvement of fracture toughness of forging steels microalloyed with titanium by accelerated cooling after hot workingScripta Metallurgica et Materialia, 1993
- Influence of the microstructure on the fracture toughness and fracture mechanisms of forging steels microalloyed with titanium with ferrite-pearlite structuresScripta Metallurgica et Materialia, 1993