Response Surface Modeling of Arsenic Adsorption by Modified Spent Tea Leaves
Open Access
- 1 March 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1090 (1) , 012129
Abstract
Arsenic (V) is represented as a very toxic compound, hence the importance of this research is concerned to reduce AS (V) from contaminated water before emitting it into river water by using modified spent tea leaves MSTL. The effect of arsenic initial concentration (10-100) mg.L−1, the mass of MSTL (0.1-0.6) g.L−1, pH (2-10), and mixing time (10-110) min were studies to obtain a mathematical model which describes the arsenic adsorption on MSTL using response surface methodology. The higher adsorption capacity has been conducted at 40 ppm of initial concentration, 0.5 g.L−1of MSTL, pH=4, and 70 min of mixing time. The maximum removal efficiency and adsorption capacity were 87% and 69.8 mg/g, respectively. The optimum experimental results were analyzed isothermally and they were found fitted in high accuracy with Langmuir isotherm models.Keywords
This publication has 7 references indexed in Scilit:
- Adsorption of Chromium (Vi) from Aqueous Solutions using Low Cost Adsorbent: Equilibrium and Regeneration StudiesJournal of Engineering, 2023
- Recycling of Agriculture Wastes for Efficient Removal of Methyl Orange Dye Using Batch Adsorption UnitIOP Conference Series: Materials Science and Engineering, 2020
- Phytoremediation of arsenic-contaminated water by Lemna Valdiviana: An optimization studyChemosphere, 2019
- Arsenic removal from water and river water by the combined adsorption - UF membrane processChemosphere, 2018
- Integration of two-stage nanofiltration with arsenic and calcium intermediate chemical precipitation for gold mining effluent treatmentEnvironmental Technology, 2018
- Arsenic removal by electrocoagulation process: Recent trends and removal mechanismChemosphere, 2017
- A comprehensive review on removal of arsenic using activated carbon prepared from easily available waste materialsEnvironmental Science and Pollution Research, 2017