Research on effects of FDM process parameters on mechanical properties of polylactic acid based on orthogonal experiments

Authors:

Abstract
In order to investigate the influence of fused deposition modeling (FDM) process parameters on the mechanical properties of polylactic acid (PLA) parts and determine the optimal printing parameters, the orthogonal experiments are designed with tensile and bending strength as optimization objectives. The study considers printing speed, layer thickness, nozzle temperature, and raster angle as research factors. PLA filament is used as the material to print the specimens. The mechanical properties are evaluated through tensile and three-point bending tests. The range analysis method is employed to assess the influence of different printing parameters on the mechanical properties, while the comprehensive evaluation method and comprehensive scoring method are used to determine the optimal combination of printing parameters. The optimal parameters are found to be ν=40 mm/s, h=0.1mm, t=210 ℃ and θ= 45°/-45°, with the corresponding tensile strength and bending strength of 26.34 MPa and 41.54 MPa, respectively.

This publication has 20 references indexed in Scilit: