YYYuan Yang

Yuan Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yuan Yang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on effects of FDM process parameters on mechanical properties of polylactic acid based on orthogonal experiments

    by Yuan Yang, Changxu Wang, Yiyang Wang, Yang Zhao, Bowen Xue, Duozhao Kong

    In order to investigate the influence of fused deposition modeling (FDM) process parameters on the mechanical properties of polylactic acid (PLA) parts and determine the optimal printing parameters, the orthogonal experiments are designed with tensile and bending strength as optimization objectives. The study considers printing speed, layer thickness, nozzle temperature, and raster angle as research factors. PLA filament is used as the material to print the specimens. The mechanical properties are evaluated through tensile and three-point bending tests. The range analysis method is employed to assess the influence of different printing parameters on the mechanical properties, while the comprehensive evaluation method and comprehensive scoring method are used to determine the optimal combination of printing parameters. The optimal parameters are found to be ν=40 mm/s, h=0.1mm, t=210 ℃ and θ= 45°/-45°, with the corresponding tensile strength and bending strength of 26.34 MPa and 41.54 MPa, respectively.


  • Open Access

    Optimization of Fused Deposition Modeling Parameters for Mechanical Properties of Polylactic Acid Parts Based on Kriging and Cuckoo Search

    by Yuan Yang, Yiyang Wang, Bowen Xue, Changxu Wang, Bo Yang

    As an emerging rapid manufacturing technology, 3D printing has been widely applied in numerous fields such as aerospace, shipbuilding, and wind power, by virtue of its advantage in efficiently fabricating components with complex structures and integrated functions. In response to the problems of poor mechanical properties and difficulty in selecting process parameters for fused deposition modeling (FDM), this paper analyzed the principle of FDM and proposed a parameter optimization method based on a Kriging and Cuckoo Search (CS) algorithm aimed at improving the mechanical properties of 3D printed polylactic acid (PLA) parts. Firstly, by analyzing FDM principle and its main parameters, printing speed and temperature were selected as research elements, and tensile strength as the mechanical performance index. Latin hypercube sampling (LHS) was integrated to generate a limited experimental sample set. Secondly, a Kriging-based prediction model for mechanical properties was constructed by learning sample data, and the nonlinear mapping relationship between process parameters and tensile strength was obtained. Then, using the combinations of speed and temperature as design variables and maximizing tensile strength as the optimization objective, an optimization model was established, and the optimal process parameters were searched by CS. The optimal printing velocity was 31 mm/s and printing temperature was 225 °C, and the corresponding maximum tensile strength was 38.27 MPa. Finally, compared to the test data, the relative prediction error of Kriging model was 0.62%, and the optimal strength (38.27 MPa) increased by about 12.7% compared to the average value (33.97 MPa) of experimental data. It can be seen that the Kriging model is effective, and the tensile strength of parts printed under the optimal process parameters is significantly improved.


  • Open Access

    Optimization of FDM Process Parameters for Mechanical Properties of Aerospace Parts Based on Kriging and CS

    by Yuan Yang, Yiyang Wang, Bowen Xue, Changxu Wang, Bo Yang

    3D printing, as an emerging rapid manufacturing technology, is widely used in various fields such as aerospace, shipbuilding, and wind power due to its ability to efficiently create parts with complex structures and integrated functions. In response to the problems of poor mechanical properties and difficulty in selecting process parameters for fused deposition modeling (FDM), this paper analyzed the principle of FDM and proposed a parameters optimization method based on Kriging and Cuckoo Search (CS) algorithm aimed at improving the mechanical properties of 3D printed polylactic acid (PLA) parts. Firstly, by analyzing the FDM process principle and its main process parameters, printing speed and temperature were selected as research elements, tensile strength as the mechanical performance index, and Latin hypercube sampling (LHS) was integrated to complete the experiments and generate a limited sample set; Secondly, a Kriging based prediction model for mechanical properties was constructed by learning sample data, and the nonlinear mapping relationship between process parameters and tensile strength was obtained; Then, using the combinations of printing speed and printing temperature as design variables and maximizing tensile strength as optimization objective, an FDM parameters optimization model was established, and the optimal process parameters were searched by CS. Finally, experimental verification showed that the Kriging model is correct and effective, and tensile strength of parts printed under the optimal process parameters is significantly improved.


  • Open Access

    Research on Effects of FDM Process Parameters on Mechanical Properties of Polylactic Acid Based on Orthogonal Experiments

    by Yuan Yang, Changxu Wang, Yiyang Wang, Bowen Xue, Duozhao Kong

    Using polylactic acid (PLA) filament as the printing material for fused deposition modeling (FDM), and tensile and bending strength as optimization indexes, the influence of four process parameters, printing speed, layer thickness, nozzle temperature, and raster angle, on mechanical properties of PLA specimens in FDM are investigated by orthogonal experiments. The mechanical responses of the printed specimens are explored through tensile and three-point bending tests. Range analysis method is used to investigate the effects of various process parameters on mechanical properties. The optimal combination of printing parameters is obtained through comprehensive evaluation method and comprehensive scoring method, and the correctness of the results is experimentally verified. The optimal process parameters are h=0.1mm, t=210 ℃, v=40 mm/s, and θ= 45°/-45°, and the corresponding tensile strength and bending strength are 26.34MPa and 41.54MPa, respectively.


  • Open Access

    Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites

    by Yuan Yang, Bo Yang, Zhengping Chang, Jihao Duan, Weihua Chen

    Continuous fiber-reinforced thermoplastic composites (CFRTPCs) have advantages such as high specific strength, high specific modulus, corrosion resistance, and recyclability and are widely used in the fields of aerospace, rail transit, new energy, and so on. However, traditional methods for preparing CFRTPCs, such as placement and molding, rely more on forming molds, resulting in high manufacturing costs and a slow response speed, which limits the promotion and application of the new generation of CFRTPCs with complex configurations and designable performance. Three-dimensional printing can efficiently create products with multiple materials, complex structures, and integrated functions, introducing new ways and opportunities for the manufacturing of CFRTPCs. However, poor mechanical properties are the bottleneck problem in achieving 3D printing of CFRTPCs. This paper summarizes the research status of the fused deposition modeling (FDM) 3D printing process and the corresponding mechanical properties of CFRTPCs. The focus is on analyzing the influences of the FDM process parameters, such as the material type, printing temperature, speed parameters, layer thickness, scanning space, stacking direction, and fiber volume content, on the mechanical properties of CFRTPCs. Finally, the main problems and future prospects of current CFRTPCs-FDM are analyzed and forecasted, providing new references and ideas for 3D printing of high-performance CFRTPCs.


  • Optimization of polylactic acid 3D printing parameters based on support vector regression and cuckoo search

    by Yuan Yang, Xilin Dai, Bo Yang, Peng Zou, Feng Gao, Jihao Duan, Changxu Wang

    3D printing, also known as additive manufacturing (AM), is evolving from a rapid prototyping tool to a pillar of the Industry 4.0 revolution and widely used in various industries, since it can quickly and efficiently create workpieces with complex structures and integrated functions. After analyzing the 3D printing principle of fused deposition modeling (FDM), this paper proposes a deformation control‐oriented optimization method for process parameters of FDM of the polylactic acid (PLA) materials, based on support vector regression (SVR) and cuckoo search (CS). First, FDM printing principle and its main process parameters were analyzed. Two key parameters, printing temperature and printing speed, were selected for research, with the maximum shrinkage deformation as the workpiece contour accuracy index. Combining Latin Hypercube Sampling (LHS) with Finite Element Analysis (FEA), finite sample sets were generated. Second, learning from the sample data, the SVR surrogate model was built to predict the workpiece contour accuracy, and the nonlinear relationship between FDM process parameters and PLA shrinkage deformation was obtained. Finally, taking the combination of printing temperature and speed as the design variable and minimizing the maximum shrinkage deformation as the optimization objective, the FDM process parameters optimization model was established, and CS was used to search for the optimal parameters combination. Experimental comparison showed that the FEA results and SVR model in this method are correct and effective, and the PLA workpiece shrinkage deformation is smaller under the optimal parameters combination, which effectively improves the shape accuracy of FDM workpieces.Highlights: Combining support vector regression (SVR) and cuckoo search (CS) can optimize polymer 3D printing process parameters. Effective finite element model was built for polymer 3D printing. SVR model established by simulation data can predict workpiece deformation. The optimal process parameters were found using CS algorithm.


  • Parametric sensitivity research of interference-fit bolted single-lap laminates joint based on an improved analytical stiffness model

    by Yuan Yang, Peng Zou, Xilin Dai, Bo Yang, Feng Gao

    Because of the excellent static and fatigue performance, the interference-fit bolted structure has a wide application prospect in the joint field. In this paper, an improved spring-mass stiffness analytical prediction model is established for the interference-fit bolted single-lap laminated composite structure. The influences of interference-fit percentage, bolt preload, secondary bending and interface frictions are considered in the model. Combined with experimental research, the value of secondary bending moment coefficient ε is studied, and the correctness of the analytical model is verified. Based on the improved stiffness model, parametric research and regression analysis on the interference-fit percentage, preload, friction, laminate width and material properties are carried out and show that the overall structure stiffness is obviously affected by ε value, laminate width and laminates properties. The stiffness decreases with the increase of ε and increases with the increase of laminate width. And as the key factors, the interference-fit percentage mainly affects the joint local friction and bolt shear stiffness, the preload and friction coefficient mainly affect the local friction, and the laminates sizes and properties directly affect the overall structural stiffness.


  • Open Access

    Multiobjective Optimization for Fixture Locating Layout of Sheet Metal Part Using SVR and NSGA‐II

    by Yuan Yang, Zhongqi Wang, Bo Yang, Zewang Jing, Yonggang Kang

    Fixture plays a significant role in determining the sheet metal part (SMP) spatial position and restraining its excessive deformation in many manufacturing operations. However, it is still a difficult task to design and optimize SMP fixture locating layout at present because there exist multiple conflicting objectives and excessive computational cost of finite element analysis (FEA) during the optimization process. To this end, a new multiobjective optimization method for SMP fixture locating layout is proposed in this paper based on the support vector regression (SVR) surrogate model and the elitist nondominated sorting genetic algorithm (NSGA‐II). By using ABAQUS™ Python script interface, a parametric FEA model is established. And the fixture locating layout is treated as design variables, while the overall deformation and maximum deformation of SMP under external forces are as the multiple objective functions. First, a limited number of training and testing samples are generated by combining Latin hypercube design (LHD) with FEA. Second, two SVR prediction models corresponding to the multiple objectives are established by learning from the limited training samples and are integrated as the multiobjective optimization surrogate model. Third, NSGA‐II is applied to determine the Pareto optimal solutions of SMP fixture locating layout. Finally, a multiobjective optimization for fixture locating layout of an aircraft fuselage skin case is conducted to illustrate and verify the proposed method.


  • Open Access

    Optimal sheet metal fixture locating layout by combining radial basis function neural network and bat algorithm

    by Zhongqi Wang, Yuan Yang, Bo Yang, Yonggang Kang

    Considering that sheet metal part has the properties of thin wall, low rigidity, easy to deform, and difficult to locate, this article proposes a new approach to optimizing sheet metal fixture locating layout by combining radial basis function neural network and bat algorithm. First, taking fixture locating layout as design variables based on the “N-2-1” locating principle, this article generates limited training and testing sample sets by Latin hypercube sampling and finite element analysis. Second, the radial basis function neural network prediction model with the description of the nonlinear mapping relationship between the fixture locating layout and the corresponding sheet metal deformation is constructed through learning from the training sample sets. Third, bat algorithm is applied to search the optimal layout of the “N” fixture locators for the minimum sheet metal deformation. Finally, two case studies are presented to demonstrate the optimization procedure and the effectiveness of the proposed method.