Pump Selection and Performance Prediction for the Technical Innovation of an Axial-Flow Pump Station
Open Access
- 7 August 2018
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2018, 1-9
Abstract
Axial-flow pumps are widely used in every sector of China. After many years of operation, the aging of mechanical and electrical facilities poses threats to their steady and safe operation. Taking the technical innovation of an axial-flow pump station as an example, the study is focused on the pump selection and performance prediction. The pump similarity law and specific speed were applied to guide the pump selection based on the designed head and discharge. The performances of pump models were compared and it is suggested for the technical innovation that when the selected model pump is adopted, the impeller diameter is kept at 3100 mm and the rotational speed is reduced from 150r/min to 136.4r/min to improve its cavitation performance. A three-dimensional pumping system model was established by using software Pro/E and CFD analyses were conducted to predict the hydraulic performance of the pumping system for the evaluation of technical innovation. It is shown through the comparison of computed results with model test results that the designed flow rate corresponding to the designed head can be fully satisfied with the selected pump and stronger pumping capacity can be prospected at the designed and mean lifting head. The pumping system model tests, in comparison between the original and the selected model pump, indicate that when the innovated pump station operates under characteristic heads, the pumping system efficiency can be raised by more than 3 percentages, and the cavitation allowance can be decreased by 0.90m; thus, better engineering and economic benefits can be prospected through the technical innovation.Keywords
Funding Information
- China National Science and Technology Supporting Program (2015BAB07B01)
This publication has 12 references indexed in Scilit:
- Numerical Prediction and Performance Experiment in an Engine Cooling Water Pump with Different Blade Outlet WidthsMathematical Problems in Engineering, 2017
- Numerical Research on Hydraulically Generated Vibration and Noise of a Centrifugal Pump Volute with Impeller Outlet Width VariationMathematical Problems in Engineering, 2014
- A Numerical Study on the Improvement of Suction Performance and Hydraulic Efficiency for a Mixed‐Flow Pump ImpellerMathematical Problems in Engineering, 2014
- Numerical Simulation of Internal Flow and Performance Prediction of Tubular Pump with Adjustable Guide VanesAdvances in Mechanical Engineering, 2014
- Numerical and Experimental Study of Pump Sump FlowsMathematical Problems in Engineering, 2014
- Experimental study of the effect of blade tip clearance and blade angle error on the performance of mixed-flow pumpScience China Technological Sciences, 2012
- Prediction method of impeller performance and analysis of loss mechanism for mixed-flow pumpScience China Technological Sciences, 2012
- Hydraulic performance of a large slanted axial‐flow pumpEngineering Computations, 2010
- Off-design performance prediction for diffuser pumpsProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2001
- Renormalization group analysis of turbulence. I. Basic theoryJournal of Scientific Computing, 1986