Numerical Modelling of Thermal Insulation of Reinforced Concrete Ceilings with Complex Cross-Sections
Open Access
- 11 April 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (8) , 2642
Abstract
The article describes the results of numerical analyses and traditional calculations of the heat transfer coefficient in ceilings with a complex cross-section, and with materials of varying density built-in inside the cross-section. Prefabricated prestressed reinforced concrete, composite reinforced, and ribbed reinforced concrete ceilings were analyzed. Traditional calculations were carried out in accordance with the EN ISO 6946:2017 standard, while the numerical analyses were carried out in a program based on the finite element method (FEM). It has been shown that calculations can be a good alternative to nondestructive testing (NDT) and laboratory tests, whose use in the case of ceilings with different geometries is limited. The differences between the calculations carried out in accordance with EN ISO 6946:2017, and the results of numerical analyses are 12%–39%. The way the air voids are taken into account has an impact on the calculation results. In the traditional method, an equivalent thermal conductivity coefficient was used, while in the numerical analysis, the coefficient was selected from the program’s material database. Since traditional calculations require simplifications, numerical methods should be considered to give more accurate results.Keywords
This publication has 25 references indexed in Scilit:
- Estimation of thermal transmittance based on temperature measurements with the application of perturbation numbersHeat and Mass Transfer, 2017
- Study on the Thermal Properties of Hollow Shale Blocks as Self-Insulating Wall MaterialsAdvances in Materials Science and Engineering, 2017
- The Effects of Roof and Wall Insulation on the Energy Costs of Low Income Housing in MexicoSustainability, 2016
- Thermal (IR) and Other NDT Techniques for Improved Material InspectionJournal of Nondestructive Evaluation, 2016
- Thermal Dynamic Insulation: Numerical Modeling in a Transient Regime and Application to Alternative Aviary HousesEnergy Procedia, 2015
- The Experimental Study of the Effective Thermal Conductivity of Bundles of Rectangular Steel Sections/ Badania Eksperymentalne Efektywnej Przewodności Cieplnej Wiązek Stalowych Profili ProstokątnychCivil and Environmental Engineering Reports, 2014
- Ultrasonic tomography – The latest nondestructive technique for testing concrete members – Description, test methodology, application exampleArchives of Civil and Mechanical Engineering, 2014
- Experimental tests for the occurence of convective heat transfer within the bed of rectangular steel profilesArchives of Thermodynamics, 2012
- Application of artificial neural networks in predicting earthmoving machinery effectiveness ratiosArchives of Civil and Mechanical Engineering, 2008
- New technique of nondestructive assessment of concrete strength using artificial intelligenceNDT & E International, 2005