Mitigation of the line-start effect in PLATO normal camera CCDs for accurate read-out noise characterization

Authors:
  • GCGiacomo Cherchi
    Giacomo Cherchi
  • FCFabrizio Cogato
    Fabrizio Cogato
  • NGNicolas Gorius
    Nicolas Gorius
  • AAAlessio Aboudan
    Alessio Aboudan
  • MEMatthias Ammler-Von Eiff
    Matthias Ammler-Von Eiff
  • PAPaolo Appollonio
    Paolo Appollonio
  • TAThierry Appourchaux
    Thierry Appourchaux
  • NANatalia Auricchio
    Natalia Auricchio
  • ABAnn Baeke
    Ann Baeke
  • NBNicolas Beraud
    Nicolas Beraud

Abstract
PLATO (PLAnetary Transits and Oscillations of stars) is the ESA’s M3 mission designed for high-precision photometric monitoring of bright stars, with the aim of detecting and characterising transiting exoplanets and supporting asteroseismic studies of their host stars. Transit detection relies on the noise level affecting the measured stellar light curve. For a star with mV = 11, the PLATO mission-level requirement sets the random Noise-to-Signal Ratio (NSR) below 50 ppm over a one-hour integration. Within this framework, the ReadOut Noise (RON) is one of the quantities used to assess the camera-level performance. During the thermal-vacuum campaigns of the 24 Normal Cameras (N-CAMs), dedicated dump-gate-high bias acquisitions revealed a columndependent electronic offset, referred to as the Line-Start Effect (LSE). When stable, this structure mainly affects the local bias level; when a variable Odd-Even component is present, it can increase the apparent RON estimated from the temporal dispersion of the bias frames. This work presents the characterisation of the LSE in PLATO N-CAMs with the aim of obtaining a more accurate estimate of the RON contribution. The analysis was applied to 23 N-CAMs flight models, excluding N-CAM FM4 because of corrupted data. After correction, the median RON decreases from 45.9 to 44.4 e− RMS. The largest correction is observed for N-CAM FM1, where the RON is reduced by 17.1 e− and the overall NSR decreases from 49.6 to 48 ppm, fully satisfying the 50 ppm requirement.