Jose Lorenzo Alvarez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jose Lorenzo Alvarez has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
- Bart Vandenbussche
Institute of Astronomy, KU Leuven
5 shared publications - Hans-Walter Rix
Max-Planck-Institut für Astronomie, Königstuhl 17, 69117 Heidelberg, Germany
5 shared publications A. Amara
4 shared publicationsA. Basset
4 shared publicationsA. Cappi
4 shared publicationsA. Cimatti
4 shared publications
Latest Publications
- 14 October 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 601
Mitigation of the line-start effect in PLATO normal camera CCDs for accurate read-out noise characterization (Erratum)
This paper, originally published on 21 August 2026, was replaced with a corrected/revised version on 14 October 2026. The spelling of author Pierre Guiton’s name was corrected. If you downloaded the original PDF but are unable to access the revision, please contact SPIE Digital Library Customer Service for assistance. Download the erratum for additional details.
- 14 October 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 601
Mitigation of the line-start effect in PLATO normal camera CCDs for accurate read-out noise characterization (Erratum)
This paper, originally published on 21 August 2026, was replaced with a corrected/revised version on 14 October 2026. The spelling of author Pierre Guiton’s name was corrected. If you downloaded the original PDF but are unable to access the revision, please contact SPIE Digital Library Customer Service for assistance. Download the erratum for additional details.
- 21 August 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 167
Mitigation of the line-start effect in PLATO normal camera CCDs for accurate read-out noise characterization
PLATO (PLAnetary Transits and Oscillations of stars) is the ESA’s M3 mission designed for high-precision photometric monitoring of bright stars, with the aim of detecting and characterising transiting exoplanets and supporting asteroseismic studies of their host stars. Transit detection relies on the noise level affecting the measured stellar light curve. For a star with mV = 11, the PLATO mission-level requirement sets the random Noise-to-Signal Ratio (NSR) below 50 ppm over a one-hour integration. Within this framework, the ReadOut Noise (RON) is one of the quantities used to assess the camera-level performance. During the thermal-vacuum campaigns of the 24 Normal Cameras (N-CAMs), dedicated dump-gate-high bias acquisitions revealed a columndependent electronic offset, referred to as the Line-Start Effect (LSE). When stable, this structure mainly affects the local bias level; when a variable Odd-Even component is present, it can increase the apparent RON estimated from the temporal dispersion of the bias frames. This work presents the characterisation of the LSE in PLATO N-CAMs with the aim of obtaining a more accurate estimate of the RON contribution. The analysis was applied to 23 N-CAMs flight models, excluding N-CAM FM4 because of corrupted data. After correction, the median RON decreases from 45.9 to 44.4 e− RMS. The largest correction is observed for N-CAM FM1, where the RON is reduced by 17.1 e− and the overall NSR decreases from 49.6 to 48 ppm, fully satisfying the 50 ppm requirement.
- 21 August 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 167
Mitigation of the line-start effect in PLATO normal camera CCDs for accurate read-out noise characterization
PLATO (PLAnetary Transits and Oscillations of stars) is the ESA’s M3 mission designed for high-precision photometric monitoring of bright stars, with the aim of detecting and characterising transiting exoplanets and supporting asteroseismic studies of their host stars. Transit detection relies on the noise level affecting the measured stellar light curve. For a star with mV = 11, the PLATO mission-level requirement sets the random Noise-to-Signal Ratio (NSR) below 50 ppm over a one-hour integration. Within this framework, the ReadOut Noise (RON) is one of the quantities used to assess the camera-level performance. During the thermal-vacuum campaigns of the 24 Normal Cameras (N-CAMs), dedicated dump-gate-high bias acquisitions revealed a columndependent electronic offset, referred to as the Line-Start Effect (LSE). When stable, this structure mainly affects the local bias level; when a variable Odd-Even component is present, it can increase the apparent RON estimated from the temporal dispersion of the bias frames. This work presents the characterisation of the LSE in PLATO N-CAMs with the aim of obtaining a more accurate estimate of the RON contribution. The analysis was applied to 23 N-CAMs flight models, excluding N-CAM FM4 because of corrupted data. After correction, the median RON decreases from 45.9 to 44.4 e− RMS. The largest correction is observed for N-CAM FM1, where the RON is reduced by 17.1 e− and the overall NSR decreases from 49.6 to 48 ppm, fully satisfying the 50 ppm requirement.
- Open Access
- 1 January 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 12 (01) , 1-20
Convolutional neural network design for the prediction of the focusing temperature of PLATO telescopes under simulated space operating conditions
The main science goal of the PLAnetary Transits and Oscillations of stars mission is to detect and characterize extrasolar planets around solar-type stars. For this purpose, the telescopes developed for the mission have a focusing system consisting on to tune the thermal surrounding of the opto-mechanics for achieving the optimal focus. We propose an alternative method for determining the best focus temperature. We designed a convolutional neural network that uses images obtained in ground performance evaluation to implement a calibration method to be used during pre-launch tests and orbital tuning. The convolutional neural network effectively predicts focusing temperatures, improving calibration efficiency and accuracy. This approach demonstrates the potential of artificial intelligence methods for optimizing telescope focusing in operational conditions.
- 1 January 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 12 (01) , 1-20
Open AccessConvolutional neural network design for the prediction of the focusing temperature of PLATO telescopes under simulated space operating conditions
The main science goal of the PLAnetary Transits and Oscillations of stars mission is to detect and characterize extrasolar planets around solar-type stars. For this purpose, the telescopes developed for the mission have a focusing system consisting on to tune the thermal surrounding of the opto-mechanics for achieving the optimal focus. We propose an alternative method for determining the best focus temperature. We designed a convolutional neural network that uses images obtained in ground performance evaluation to implement a calibration method to be used during pre-launch tests and orbital tuning. The convolutional neural network effectively predicts focusing temperatures, improving calibration efficiency and accuracy. This approach demonstrates the potential of artificial intelligence methods for optimizing telescope focusing in operational conditions.
- Top Cited PapersOpen Access
- 30 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 697, A2
Euclid
This paper presents the specification, design, and development of the Visible Camera (VIS) on the European Space Agency’s Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg2 sampled at 0″.1 with an array of 609 Megapixels and a spatial resolution of 0″.18. It will be used to survey approximately 14 000 deg2 of extragalactic sky to measure the distortion of galaxies in the redshift range z = 0.1–1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes leveraged by Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and the extent to which this has changed with look-back time can be used to constrain the nature of dark energy and theories of gravity. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, specified to reach mAB ≥ 24.5 with a signal-to-noise ratio S/N ≥ 10 in a single broad IE ≃ (r + i + z) band over a six-year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the conception of VIS and describes the instrument design and development, before reporting the prelaunch performance derived from ground calibrations and brief results from the inorbit commissioning. VIS should reach fainter than mAB = 25 with S/N ≥ 10 for galaxies with a full width at half maximum of 0″. 3 in a 1″.3 diameter aperture over the Wide Survey, and mAB ≥ 26.4 for a Deep Survey that will cover more than 50 deg2. The paper also describes how the instrument works with the Euclid telescope and survey, and with the science data processing, to extract the cosmological information.
- 30 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 697, A2
Top Cited PapersOpen AccessEuclid
This paper presents the specification, design, and development of the Visible Camera (VIS) on the European Space Agency’s Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg2 sampled at 0″.1 with an array of 609 Megapixels and a spatial resolution of 0″.18. It will be used to survey approximately 14 000 deg2 of extragalactic sky to measure the distortion of galaxies in the redshift range z = 0.1–1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes leveraged by Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and the extent to which this has changed with look-back time can be used to constrain the nature of dark energy and theories of gravity. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, specified to reach mAB ≥ 24.5 with a signal-to-noise ratio S/N ≥ 10 in a single broad IE ≃ (r + i + z) band over a six-year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the conception of VIS and describes the instrument design and development, before reporting the prelaunch performance derived from ground calibrations and brief results from the inorbit commissioning. VIS should reach fainter than mAB = 25 with S/N ≥ 10 for galaxies with a full width at half maximum of 0″. 3 in a 1″.3 diameter aperture over the Wide Survey, and mAB ≥ 26.4 for a Deep Survey that will cover more than 50 deg2. The paper also describes how the instrument works with the Euclid telescope and survey, and with the science data processing, to extract the cosmological information.
- Top Cited PapersOpen Access
- 30 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 697, A1
Euclid
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015–2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14 000 deg2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.
- 30 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 697, A1
Top Cited PapersOpen AccessEuclid
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015–2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14 000 deg2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.
- Top Cited PapersOpen Access
- 30 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 697, A3
Euclid
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R ≳ 450 slitless grism spectroscopy in the 950–2020 nm wavelength range. In this reference article, we illuminate the background of NISP’s functional and calibration requirements, describe the instrument’s integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated as well as its technical potentials and limitations. Links to articles providing more details and the technical background are included. The NISP’s 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0″.3 pixel−1 deliver a field of view of 0.57 deg2. In photometric mode, NISP reaches a limiting magnitude of ~24.5 AB mag in three photometric exposures of about 100 s in exposure time for point sources and with a S/N of five. For spectroscopy, NISP’s pointsource sensitivity is a signal-to-noise ratio = 3.5 detection of an emission line with flux ~2 × 10−16 erg s−1 cm−2 integrated over two resolution elements of 13.4 Å in 3 × 560 s grism exposures at 1.6 µm (redshifted Hα). Our calibration includes on-ground and in-flight characterisation and monitoring of the pixel-based detector baseline, dark current, non-linearity, and sensitivity to guarantee a relative photometric accuracy better than 1.5% and a relative spectrophotometry better than 0.7%. The wavelength calibration must be accurate to 5 Å or better. The NISP is the state-of-the-art instrument in the near-infrared for all science beyond small areas available from HST and JWST – and it represents an enormous advance from any existing instrumentation due to its combination of field size and high throughput of telescope and instrument. During Euclid’s six-year survey covering 14 000 deg2 of extragalactic sky, NISP will be the backbone in determining distances of more than a billion galaxies. Its near-infrared data will become a rich reference imaging and spectroscopy data set for the coming decades.
- 30 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 697, A3
Top Cited PapersOpen AccessEuclid
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R ≳ 450 slitless grism spectroscopy in the 950–2020 nm wavelength range. In this reference article, we illuminate the background of NISP’s functional and calibration requirements, describe the instrument’s integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated as well as its technical potentials and limitations. Links to articles providing more details and the technical background are included. The NISP’s 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0″.3 pixel−1 deliver a field of view of 0.57 deg2. In photometric mode, NISP reaches a limiting magnitude of ~24.5 AB mag in three photometric exposures of about 100 s in exposure time for point sources and with a S/N of five. For spectroscopy, NISP’s pointsource sensitivity is a signal-to-noise ratio = 3.5 detection of an emission line with flux ~2 × 10−16 erg s−1 cm−2 integrated over two resolution elements of 13.4 Å in 3 × 560 s grism exposures at 1.6 µm (redshifted Hα). Our calibration includes on-ground and in-flight characterisation and monitoring of the pixel-based detector baseline, dark current, non-linearity, and sensitivity to guarantee a relative photometric accuracy better than 1.5% and a relative spectrophotometry better than 0.7%. The wavelength calibration must be accurate to 5 Å or better. The NISP is the state-of-the-art instrument in the near-infrared for all science beyond small areas available from HST and JWST – and it represents an enormous advance from any existing instrumentation due to its combination of field size and high throughput of telescope and instrument. During Euclid’s six-year survey covering 14 000 deg2 of extragalactic sky, NISP will be the backbone in determining distances of more than a billion galaxies. Its near-infrared data will become a rich reference imaging and spectroscopy data set for the coming decades.
- 24 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13092, 43
Status of PLATO mission camera: progress on TVAC tests and performance overview for the camera flight models
PLATO (PLAnetary Transits and Oscillations of stars)1 is the M3 class ESA mission dedicated to the discovery and study of extrasolar planetary systems by means of planetary transits detection. PLATO Payload Camera units are integrated and vibrated at CSL before being TVAC tested for thermal acceptance and performance verification at 3 different test facilities (SRON, IAS and INTA). 15 of the 26 Flight Cameras were integrated, tested and delivered to ESA for integration by the Prime between June 2023 and June 2024, with the remaining flight units to be tested by the end of 2024. In this paper, we provide an overview of our serial testing approach, some of the associated challenges, key performance results and an up-to-date status on the remaining planned activities.
- 24 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13092, 43
Status of PLATO mission camera: progress on TVAC tests and performance overview for the camera flight models
PLATO (PLAnetary Transits and Oscillations of stars)1 is the M3 class ESA mission dedicated to the discovery and study of extrasolar planetary systems by means of planetary transits detection. PLATO Payload Camera units are integrated and vibrated at CSL before being TVAC tested for thermal acceptance and performance verification at 3 different test facilities (SRON, IAS and INTA). 15 of the 26 Flight Cameras were integrated, tested and delivered to ESA for integration by the Prime between June 2023 and June 2024, with the remaining flight units to be tested by the end of 2024. In this paper, we provide an overview of our serial testing approach, some of the associated challenges, key performance results and an up-to-date status on the remaining planned activities.
- 24 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13099, 130990D
Benefits and limitations of model based systems engineering (MBSE) application in full scale space project: a return from experience in the ESA PLATO mission
Digitally supported Systems Engineering, or Model Based Systems Engineering (MBSE) methodologies usage in full scale space science missions development in Europe is so far limited to a few cases and several factors limit a wider adoption: from lack of clear methodology, to limitations in tooling, to lack of clarity on contractual aspects. To tackle some of these limitations, a progressive implementation of MBSE practices in Science missions at the European Space Agency has been adopted, starting with the Euclid mission and continued with PLATO and ARIEL. We present an assessment of the experience in the PLATO mission with the usage of two main MBSE approaches: i) SysML model and ii) a Mission Parameters Database used for all performance and pipeline development. We review the lessons learned from the experience in Euclid, and the implementation in PLATO, and identify areas for development to reach standardization of practices in Europe.
- 24 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13099, 130990D
Benefits and limitations of model based systems engineering (MBSE) application in full scale space project: a return from experience in the ESA PLATO mission
Digitally supported Systems Engineering, or Model Based Systems Engineering (MBSE) methodologies usage in full scale space science missions development in Europe is so far limited to a few cases and several factors limit a wider adoption: from lack of clear methodology, to limitations in tooling, to lack of clarity on contractual aspects. To tackle some of these limitations, a progressive implementation of MBSE practices in Science missions at the European Space Agency has been adopted, starting with the Euclid mission and continued with PLATO and ARIEL. We present an assessment of the experience in the PLATO mission with the usage of two main MBSE approaches: i) SysML model and ii) a Mission Parameters Database used for all performance and pipeline development. We review the lessons learned from the experience in Euclid, and the implementation in PLATO, and identify areas for development to reach standardization of practices in Europe.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13092, 42-347
The planetary transit and oscillations (PLATO) mission status: flight model build and initial ground testing
PLATO (PLAnetary Transits and Oscillations) mission is a space-based optical multi-camera photometer mission of the European Space Agency (ESA) to identify and characterize exoplanets and their hosting stars using two main techniques: planetary transit and asteroseismology. Selected as the M3 (third Medium class mission) of the ESA 2015-2025 Cosmic Vision program, PLATO is scheduled to launch end of 2026 and designed for 4 years of nominal observation. The PLATO spacecraft is composed of a Service Module and a Payload Module. The Service Module comprises all the conventional spacecraft subsystems and the sun shield with attached solar arrays. The Payload Module consists of a highly stable optical bench, equipped with 26 optical cameras covering a global field of view of > 2232deg2. The PLATO spacecraft data is complemented by ground-based observations and processed by a dedicated Science Ground Segment. We describe the mission and spacecraft architecture and provide a view of the current status of development.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13092, 42-347
The planetary transit and oscillations (PLATO) mission status: flight model build and initial ground testing
PLATO (PLAnetary Transits and Oscillations) mission is a space-based optical multi-camera photometer mission of the European Space Agency (ESA) to identify and characterize exoplanets and their hosting stars using two main techniques: planetary transit and asteroseismology. Selected as the M3 (third Medium class mission) of the ESA 2015-2025 Cosmic Vision program, PLATO is scheduled to launch end of 2026 and designed for 4 years of nominal observation. The PLATO spacecraft is composed of a Service Module and a Payload Module. The Service Module comprises all the conventional spacecraft subsystems and the sun shield with attached solar arrays. The Payload Module consists of a highly stable optical bench, equipped with 26 optical cameras covering a global field of view of > 2232deg2. The PLATO spacecraft data is complemented by ground-based observations and processed by a dedicated Science Ground Segment. We describe the mission and spacecraft architecture and provide a view of the current status of development.
- Open Access
Euclid. III. The NISP Instrument
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.
Open AccessEuclid. III. The NISP Instrument
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.