Numerical and Experimental Investigation of Supersonic Binary Fluid Ejector Performance
Open Access
Abstract
Ejectors are simple mechanical devices with no moving parts which convert the pressure energy of a motive fluid to kinetic energy and generate suction of the secondary fluid. The ability to recover waste heat, to operate using solar power and the ability to use geothermal energy make ejector-based systems attractive in different industrial applications. The main challenge of ejector-based refrigeration systems is their relatively low coefficient of performance (COP). In order to increase the ejector performance, two chemically distinct fluids can be used in the refrigeration cycle. It is suggested that a higher molecular mass be used for the motive fluid to improve the entrainment ratio of the binary fluid ejector (BFE) and thus the system COP. Inert gas combinations of argon–helium and krypton–air are studied in this paper using computational fluid dynamics (CFDs) and experimental measurements. All CFD cases were axisymmetric and the appropriate turbulence model was selected based on experimental validation. Specifically, the entrainment ratio and the static pressure along the ejector wall were measured to validate the CFD predictions. It was found that the molar entrainment ratio was significantly higher in argon–helium compared to krypton–air. The static pressure measurements along the wall, in addition, exhibited good agreement with the results obtained via computational fluid dynamics (CFDs).Keywords
This publication has 22 references indexed in Scilit:
- Studies on the effects of varying secondary gas properties in a low entrainment ratio supersonic ejectorApplied Thermal Engineering, 2015
- A new waste heat district heating system with combined heat and power (CHP) based on ejector heat exchangers and absorption heat pumpsEnergy, 2014
- CFD simulation on the effect of primary nozzle geometries for a steam ejector in refrigeration cycleInternational Journal of Thermal Sciences, 2013
- Comparison of CFD and experimental performance results of a variable area ratio steam ejectorInternational Journal of Low-Carbon Technologies, 2010
- Correlation-Based Transition Modeling for Unstructured Parallelized Computational Fluid Dynamics CodesAIAA Journal, 2009
- CFD analysis of a supersonic air ejector. Part II: Relation between global operation and local flow featuresApplied Thermal Engineering, 2009
- Performance prediction of steam ejector using computational fluid dynamics: Part 1. Validation of the CFD resultsInternational Journal of Thermal Sciences, 2007
- Transition Modelling for General Purpose CFD CodesFlow, Turbulence and Combustion, 2006
- Ejectors: applications in refrigeration technologyRenewable and Sustainable Energy Reviews, 2004
- Performance of Ejectors As a Function of the Molecular Weights of VaporsIndustrial & Engineering Chemistry, 1939