Nikolay Bukharin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Nikolay Bukharin has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Mouhammad El Hassan
Mechanical Engineering Department, Prince Mohammad Bin Fahd University, Al Khobar 34754, Saudi Arabia
7 shared publications - Anas Sakout
Mechanical Engineering Department, La Rochelle University, 17031 La Rochelle, France
2 shared publications - Irina Pakhlyan
Armavir Institute of Mechanics and Technology, Kuban State Technological University, Armavir 352905, Russia
2 shared publications - Maxim Omelyanyuk
Armavir Institute of Mechanics and Technology, Kuban State Technological University, Armavir 352905, Russia
2 shared publications Mouhammad El Hassan
Mechanical Engineering Department, Prince Mohammad Bin Fahd University, Dhahran, Saudi Arabia
2 shared publications- Aleksey I. Ukolov
Kerch State Maritime Technological University
1 shared publication
Latest Publications
- Top Cited PapersOpen Access
Machine Learning in Fluid Dynamics—Physics-Informed Neural Networks (PINNs) Using Sparse Data: A Review
Fluid mechanics often involves complex systems characterized by a large number of physical parameters, which are usually described by experimental and numerical sparse data (temporal or spatial). The difficulty of obtaining complete spatio-temporal datasets is a common issue with conventional approaches, such as computational fluid dynamics (CFDs) and various experimental methods, particularly when evaluating and modeling turbulent flows. This review paper focuses on the integration of machine learning (ML), specifically physics-informed neural networks (PINNs), as a means to address this challenge. By directly incorporating governing physical equations into neural network training, PINNs present a novel method that allows for the reconstruction of flow from sparse and noisy data. This review examines various applications in fluid mechanics where sparse data is a common problem and evaluates the effectiveness of PINNs in enhancing flow prediction accuracy. An overview of diverse PINNs methods, their applications, and outcomes is discussed, demonstrating their flexibility and effectiveness in addressing challenges related to sparse data and illustrating that the future of fluid mechanics lies in the synergy between data-driven approaches and established physical theories.
Top Cited PapersOpen AccessMachine Learning in Fluid Dynamics—Physics-Informed Neural Networks (PINNs) Using Sparse Data: A Review
Fluid mechanics often involves complex systems characterized by a large number of physical parameters, which are usually described by experimental and numerical sparse data (temporal or spatial). The difficulty of obtaining complete spatio-temporal datasets is a common issue with conventional approaches, such as computational fluid dynamics (CFDs) and various experimental methods, particularly when evaluating and modeling turbulent flows. This review paper focuses on the integration of machine learning (ML), specifically physics-informed neural networks (PINNs), as a means to address this challenge. By directly incorporating governing physical equations into neural network training, PINNs present a novel method that allows for the reconstruction of flow from sparse and noisy data. This review examines various applications in fluid mechanics where sparse data is a common problem and evaluates the effectiveness of PINNs in enhancing flow prediction accuracy. An overview of diverse PINNs methods, their applications, and outcomes is discussed, demonstrating their flexibility and effectiveness in addressing challenges related to sparse data and illustrating that the future of fluid mechanics lies in the synergy between data-driven approaches and established physical theories.
- Open Access
Experimental Investigation of the Entrainment Mechanism in Circular and Lobed Hemispherical Jets
Better mixing in the near-field region of jets with their surrounding fluid is of high interest for several industrial applications. Passive control that involves jet geometry modifications as compared to the traditional circular design is used in the present work. An analysis of the entrainment mechanism in the near jet-exit field is proposed for innovative hemispherical nozzles (circular and six-lobed). High-speed Time-Resolved Particle Image Velocimetry (TR-PIV) measurements are used to experimentally characterize the entrainment mechanism in these jets. The distributions of mean entrainment rates, shear layer growth, and momentum flux are investigated along the longitudinal direction within the near-field region of both circular and lobed hemispherical jets. Significant entrainment enhancement is found using the hemispherical geometry as a passive-control method. By comparing both investigated hemispherical nozzle geometries, it has been demonstrated that the lobed nozzle provides higher mixing rates compared to the circular jet. This enhancement in mixing can be attributed to the stronger streamwise vortex structures generated by the lobed nozzle geometry, which promote increased entrainment of the surrounding fluid.
Open AccessExperimental Investigation of the Entrainment Mechanism in Circular and Lobed Hemispherical Jets
Better mixing in the near-field region of jets with their surrounding fluid is of high interest for several industrial applications. Passive control that involves jet geometry modifications as compared to the traditional circular design is used in the present work. An analysis of the entrainment mechanism in the near jet-exit field is proposed for innovative hemispherical nozzles (circular and six-lobed). High-speed Time-Resolved Particle Image Velocimetry (TR-PIV) measurements are used to experimentally characterize the entrainment mechanism in these jets. The distributions of mean entrainment rates, shear layer growth, and momentum flux are investigated along the longitudinal direction within the near-field region of both circular and lobed hemispherical jets. Significant entrainment enhancement is found using the hemispherical geometry as a passive-control method. By comparing both investigated hemispherical nozzle geometries, it has been demonstrated that the lobed nozzle provides higher mixing rates compared to the circular jet. This enhancement in mixing can be attributed to the stronger streamwise vortex structures generated by the lobed nozzle geometry, which promote increased entrainment of the surrounding fluid.
- Open Access
Optimization of Rotational Hydrodynamic Cavitation Reactor Geometry
A Rotary-Pulsation Apparatus (RPA), also known in the literature as a Rotational Hydrodynamic Cavitation Reactor (RHCR), is a device which typically consists of a rotating mechanism that generates pulsations or vibrations within a fluid. This can be achieved through various means such as mechanical agitation, pneumatic pulses, or hydraulic forces. It is widely used in food, chemical, pharmaceutical, and microbiological industries to improve the mixing of different fluids, dispersion, pasteurization, and sterilization. In the present paper, a CFD study was conducted to develop and optimize the geometry of the RPA’s rotor and stator to induce cavitation in the fluid flow. The effect of cavitation has the potential to improve dispersion and emulsion properties and to significantly reduce operation pressure, in comparison to conventional mixing systems.
Open AccessOptimization of Rotational Hydrodynamic Cavitation Reactor Geometry
A Rotary-Pulsation Apparatus (RPA), also known in the literature as a Rotational Hydrodynamic Cavitation Reactor (RHCR), is a device which typically consists of a rotating mechanism that generates pulsations or vibrations within a fluid. This can be achieved through various means such as mechanical agitation, pneumatic pulses, or hydraulic forces. It is widely used in food, chemical, pharmaceutical, and microbiological industries to improve the mixing of different fluids, dispersion, pasteurization, and sterilization. In the present paper, a CFD study was conducted to develop and optimize the geometry of the RPA’s rotor and stator to induce cavitation in the fluid flow. The effect of cavitation has the potential to improve dispersion and emulsion properties and to significantly reduce operation pressure, in comparison to conventional mixing systems.
- 2 August 2023
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 31 (25) , 6999-7007
A comprehensive analysis of the erosion in a carbon steel boiler tube elbow through the use of 3D mapping of the corroded surface and CFD modeling
- 2 August 2023
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 31 (25) , 6999-7007
A comprehensive analysis of the erosion in a carbon steel boiler tube elbow through the use of 3D mapping of the corroded surface and CFD modeling
- Open Access
Numerical and Experimental Investigation of Supersonic Binary Fluid Ejector Performance
Ejectors are simple mechanical devices with no moving parts which convert the pressure energy of a motive fluid to kinetic energy and generate suction of the secondary fluid. The ability to recover waste heat, to operate using solar power and the ability to use geothermal energy make ejector-based systems attractive in different industrial applications. The main challenge of ejector-based refrigeration systems is their relatively low coefficient of performance (COP). In order to increase the ejector performance, two chemically distinct fluids can be used in the refrigeration cycle. It is suggested that a higher molecular mass be used for the motive fluid to improve the entrainment ratio of the binary fluid ejector (BFE) and thus the system COP. Inert gas combinations of argon–helium and krypton–air are studied in this paper using computational fluid dynamics (CFDs) and experimental measurements. All CFD cases were axisymmetric and the appropriate turbulence model was selected based on experimental validation. Specifically, the entrainment ratio and the static pressure along the ejector wall were measured to validate the CFD predictions. It was found that the molar entrainment ratio was significantly higher in argon–helium compared to krypton–air. The static pressure measurements along the wall, in addition, exhibited good agreement with the results obtained via computational fluid dynamics (CFDs).
Open AccessNumerical and Experimental Investigation of Supersonic Binary Fluid Ejector Performance
Ejectors are simple mechanical devices with no moving parts which convert the pressure energy of a motive fluid to kinetic energy and generate suction of the secondary fluid. The ability to recover waste heat, to operate using solar power and the ability to use geothermal energy make ejector-based systems attractive in different industrial applications. The main challenge of ejector-based refrigeration systems is their relatively low coefficient of performance (COP). In order to increase the ejector performance, two chemically distinct fluids can be used in the refrigeration cycle. It is suggested that a higher molecular mass be used for the motive fluid to improve the entrainment ratio of the binary fluid ejector (BFE) and thus the system COP. Inert gas combinations of argon–helium and krypton–air are studied in this paper using computational fluid dynamics (CFDs) and experimental measurements. All CFD cases were axisymmetric and the appropriate turbulence model was selected based on experimental validation. Specifically, the entrainment ratio and the static pressure along the ejector wall were measured to validate the CFD predictions. It was found that the molar entrainment ratio was significantly higher in argon–helium compared to krypton–air. The static pressure measurements along the wall, in addition, exhibited good agreement with the results obtained via computational fluid dynamics (CFDs).
- Open Access
Experimental Study of Cavitation Development and Secondary Circulation Flow between Two Eccentric Cylinders
The flow of a hydrophobic fluid in the gap between eccentric cylinders has been experimentally studied. The experimental setup was designed and built for this study. Experimental setup consists of two eccentric cylinders with the ability to rotate and a camera, a microscope, and a pressure sensor. The conditions for gaseous cavitation occurrence during the rotation of the outer cylinder was considered in this study. The discreteness of gaseous cavitation occurrence in the form of individual bubbles is shown. When cavitation bubbles merge, the charge is redistributed at the gas–liquid interface, and bubble luminescence is observed. It has been shown that near the surface of the inner cylinder, in the area of flow expansion and compression, reverse flows occur.
Open AccessExperimental Study of Cavitation Development and Secondary Circulation Flow between Two Eccentric Cylinders
The flow of a hydrophobic fluid in the gap between eccentric cylinders has been experimentally studied. The experimental setup was designed and built for this study. Experimental setup consists of two eccentric cylinders with the ability to rotate and a camera, a microscope, and a pressure sensor. The conditions for gaseous cavitation occurrence during the rotation of the outer cylinder was considered in this study. The discreteness of gaseous cavitation occurrence in the form of individual bubbles is shown. When cavitation bubbles merge, the charge is redistributed at the gas–liquid interface, and bubble luminescence is observed. It has been shown that near the surface of the inner cylinder, in the area of flow expansion and compression, reverse flows occur.
- Open Access
- 2 February 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 228-233
Investigation of the effects of the jet nozzle geometry and location on the performance of supersonic fluid ejectors
- 2 February 2022
- Published by Elsevier in Energy Reports
- Vol. 8, 228-233
Open AccessInvestigation of the effects of the jet nozzle geometry and location on the performance of supersonic fluid ejectors
- Open Access
Reduction of Energy Consumption for Water Wells Rehabilitation. Technology Optimization
Groundwater wells are widely used in the energy sector, including for drinking water supplies and as water source wells in the oil and gas industry to increase production of natural gas and petroleum. Water well clogging, which can happen to any well for various reasons, is a serious problem that can lead to increased power costs due to a higher head to the pump, a reduction in the flow rate and various drawdown issues. If rehabilitation procedures do not take place in time, this can result in permanent loss of the well, and a new well must be drilled, which is not a sustainable approach. Rehabilitation methods for water wells usually include mechanical and chemical treatments, and even though these methods are well established and have been used for many years we can still observe many abandoned wells which could be rehabilitated. In this study, sets of cavitation generators are developed and used in combination with common conic hydrodynamic nozzles. This combination reduces the pressure in the system and makes the cleaning setup much lighter and more mobile. The designed nozzles were successfully used in hydrodynamic cleaning of four water wells.
Open AccessReduction of Energy Consumption for Water Wells Rehabilitation. Technology Optimization
Groundwater wells are widely used in the energy sector, including for drinking water supplies and as water source wells in the oil and gas industry to increase production of natural gas and petroleum. Water well clogging, which can happen to any well for various reasons, is a serious problem that can lead to increased power costs due to a higher head to the pump, a reduction in the flow rate and various drawdown issues. If rehabilitation procedures do not take place in time, this can result in permanent loss of the well, and a new well must be drilled, which is not a sustainable approach. Rehabilitation methods for water wells usually include mechanical and chemical treatments, and even though these methods are well established and have been used for many years we can still observe many abandoned wells which could be rehabilitated. In this study, sets of cavitation generators are developed and used in combination with common conic hydrodynamic nozzles. This combination reduces the pressure in the system and makes the cleaning setup much lighter and more mobile. The designed nozzles were successfully used in hydrodynamic cleaning of four water wells.
- Open Access
- 2 April 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (7) , 3166
A Review on the Erosion Mechanism in Cavitating Jets and Their Industrial Applications
Cavitating jets have been widely studied for over a century, but despite the extensive literature on this subject, the implementation of cavitating jets in many industries is still very limited due to technical challenges. The main purpose of the present paper is to provide recommendations on using the cavitating jets based on a comprehensive literature review on the erosion mechanism in these jets. Self-resonating jets are extensively discussed in the present paper due to their importance in amplifying the erosion effect of cavitating jets. The influence of different jet nozzle geometric parameters and the operating conditions of the cavitating jet flow on the erosion mechanism is also discussed. Finally, well drilling in addition to multiple other industrial applications of cavitating jets are examined.
- 2 April 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (7) , 3166
Open AccessA Review on the Erosion Mechanism in Cavitating Jets and Their Industrial Applications
Cavitating jets have been widely studied for over a century, but despite the extensive literature on this subject, the implementation of cavitating jets in many industries is still very limited due to technical challenges. The main purpose of the present paper is to provide recommendations on using the cavitating jets based on a comprehensive literature review on the erosion mechanism in these jets. Self-resonating jets are extensively discussed in the present paper due to their importance in amplifying the erosion effect of cavitating jets. The influence of different jet nozzle geometric parameters and the operating conditions of the cavitating jet flow on the erosion mechanism is also discussed. Finally, well drilling in addition to multiple other industrial applications of cavitating jets are examined.
- Open Access
- 1 December 2020
- Published by Elsevier in Energy Reports
- Vol. 6, 1237-1243
Applications of cavitating jets to radioactive scale cleaning in pipes
- 1 December 2020
- Published by Elsevier in Energy Reports
- Vol. 6, 1237-1243
Open AccessApplications of cavitating jets to radioactive scale cleaning in pipes