METAL-SUPPORTED SOLID OXIDE FUEL CELLS: SYNTHESIS AND ELECTROCHEMICAL PROPERTIES ANALYSIS USING OPTIMIZATION METHOD
Authors:
- 21 October 2024
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
- Vol. 33 (07)
Abstract
Recently, metal-supported solid oxide fuel cells (MS–SOFCs) have been in the spotlight again for their design, thanks to their inexpensive materials, robustness, resistance to thermal cycling, and benefits of manufacturability. Hydrogen energy electrochemical devices, like MS–SOFCs, have a lot of potential. They are very ideal substitutes for solid oxide fuel cells (SOFCs) that utilize electrolytes or ceramic electrodes as their carrier basis, because of their greater durability, mechanical stability, heat cycle resistance, and rapid startup time. Even though MS–SOFCs have several advantages over conventional ceramic-based SOFCs, researchers are still struggling to perfect them due to issues such as selecting the appropriate metal-based material for the electrodes (anode, electrode) and comprehending how they deteriorate. This limitation might be evaded by optimizing the pore former filling and the diameter of the metallic supports (130–250[ ][ ]m). Optimization methods, such as particle swarm optimization, as well as penetration cycle numbers (1–15), as well as the impacts of fire temperatures (400–900 ∘ C), were investigated to aid in optimizing the catalyst infiltration procedure. The enhanced cell outperformed its original performance by a factor of three, reaching an ideal energy density of 0.9[ ]W cm[ ] at 700 ∘ C when powered by hydrogen. The improved cells had a 2% degradation rate per 100[ ]h at 550 ∘ C, a 4.5% degradation rate at 600 ∘ C, and a 5.5% degradation rate at 700 ∘ C. We used electrochemical impedance spectroscopy and scanning electron microscopy to look at the catalyst’s mass shipping, coarsening, and chromium poisoning.Keywords
This publication has 26 references indexed in Scilit:
- A scalable membrane electrode assembly architecture for efficient electrochemical conversion of CO2 to formic acidNature Communications, 2023
- Recent Progress on Carbon‐Based Electrocatalysts for Oxygen Reduction Reaction: Insights on the Type of Synthesis Protocols, Performances and Outlook MechanismsChemElectroChem, 2023
- Atomically Dispersed Metal–Nitrogen–Carbon Catalysts with d-Orbital Electronic Configuration-Dependent Selectivity for Electrochemical CO2-to-CO ReductionACS Catalysis, 2023
- Galvanic replacement managing direct methanol fuel cells: AgPt nanotubes as a strategy for methanol crossover effect toleranceJournal of Materials Science, 2022
- Metal organic frameworks as emergent oxygen-reducing cathode catalysts for microbial fuel cells: a reviewInternational Journal of Environmental Science and Technology, 2021
- Facile wet-chemical synthesis and evaluation of physico-chemical characteristics of novel nanocrystalline NdCoO3-based perovskite oxide as cathode for LT-SOFC applicationsBulletin of Materials Science, 2021
- Metal-free nitrogen-doped graphenic materials as cathode catalysts for the oxygen reduction reaction in polymer electrolyte membrane fuel cellsJournal of Applied Electrochemistry, 2021
- Advanced Noncarbon Materials as Catalyst Supports and Non-noble Electrocatalysts for Fuel Cells and Metal–Air BatteriesElectrochemical Energy Reviews, 2021
- One-step synthesis of Ni(OH)2/MWCNT nanocomposites for constructing a nonenzymatic hydroquinone/O2fuel cellRSC Advances, 2020
- Mass Transfer in a Co/N/C Catalyst Layer for the Anion Exchange Membrane Fuel CellACS Applied Materials & Interfaces, 2020