Optimization Method of the Clamping Force for Large Cabin Parts
Open Access
- 22 November 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12575
Abstract
In order to realize the stable clamping of large cabin parts, this paper studied the clamping force optimization of the clamping mechanism for large-mass and large-size cabin parts. Firstly, three kinds of contact models are introduced. Then, a clamping matrix is constructed for a particular clamping configuration. The nonlinear friction cone constraint at the contact point is transformed into a linear affine constraint in a smooth Riemannian manifold using the special structure of the positive definite symmetric matrix. Finally, a large cabin part used in the aerospace field is used as an example for calculating and simulating the clamping force optimization. Different optimization algorithms are used to calculate the initial value which is put into the gradient flow optimization method of the clamping force for optimization calculation. Meanwhile, the normal clamping force value of a 2 t object is measured using relevant experimental equipment. The simulation results and experimental results show that the gradient flow optimization method of the clamping force can quickly complete the clamping force optimization of large-mass and large-size cabin parts. The actual measured value of the normal clamping force is close to the simulated convergence value. The distribution of the normal force of the clamping mechanisms and the convergence value of the clamping force for each clamping mechanism can provide some references for determining the output clamping force of the clamping mechanism and confirming a reasonable distribution of the clamping mechanism. It also confirms the feasibility and effectiveness of this method applied to the clamping force optimization for a large axial part.Keywords
All Related Versions
Funding Information
- Foundation for Innovative Research Groups of the Natural Science Foundation of Hebei Province (E2020203174, U20A20332)
- Key Project of National Natural Science Foundation of China (E2020203174, U20A20332)
- University of Rome Tor Vergata (E2020203174, U20A20332)
This publication has 20 references indexed in Scilit:
- A planar geometric design approach for a large grasp range in underactuated handsMechanism and Machine Theory, 2011
- A constrained optimization framework for compliant underactuated graspingMechanical Sciences, 2011
- Design Considerations for an Underactuated Robotic Finger MechanismChinese Journal of Mechanical Engineering, 2009
- Real time force optimization algorithm of multi-fingered graspChinese Journal of Mechanical Engineering, 2007
- Determination of minimum clamping forces for dynamically stable fixturingInternational Journal of Machine Tools and Manufacture, 2006
- Quadratically convergent algorithms for optimal dextrous hand graspingIEEE Transactions on Robotics and Automation, 2002
- Grasp analysis as linear matrix inequality problemsIEEE Transactions on Robotics and Automation, 2000
- Dextrous hand grasping force optimizationIEEE Transactions on Robotics and Automation, 1996
- Efficient algorithm for optimal force distribution-the compact-dual LP methodIEEE Transactions on Robotics and Automation, 1990
- Analysis of Multifingered HandsThe International Journal of Robotics Research, 1986