Microstrip-Based Anti-Aliasing Filters for Beyond-50 GHz-Bandwidth Mix-Filter-Sample Analog-to-Digital-Converters
Open Access
- 14 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 65389-65402
Abstract
High performance anti-aliasing filters (AAF) are critical components of advanced frequency interleaved (FI) analog-to-digital converter (ADC) structures, which are capable of overcoming the sample-clock jitter limit for ultra-high speed power efficient ADCs exceeding 100 GS/s as is necessary in future radio frequency systems. Employing printed circuit board (PCB) microstrip filters is a promising approach as they offer a highly precise low-cost solution. In face of the specific requirements of the FI-ADC on the AAF amplitude response, the stepped impedance approach is shown to be much more suitable than other common approaches for wide stopband filters. The solution to neutralizing the spurious pass bands by placing them in the samplers’ mute frequency regions is introduced. Due to the high cutoff frequencies, typically beyond 8 GHz, parasitics and lateral resonances become significant however. Hence, a novel compensation method is presented that integrates well with the required amplitude response, by reinterpreting the longitudinal low-Z-sections as individual lateral microstrips. To prove the proposed method, the design, simulation, and physical implementation of such AAFs are carried out in the context of a state-of-the-art beyond-20 GS/s 7 bit sub-ADC core and a baseband processing bandwidth of 7 GHz. The measurement results confirm the behavior predicted by the analytical models and EM simulations, and therefore the suitability of the method for designing AAFs for FI-ADCs.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (468818520, 545790440)
This publication has 81 references indexed in Scilit:
- A novel neural-based approach for design of microstrip filtersAEU - International Journal of Electronics and Communications, 2019
- Two novel architectures for 4-channel mixing/filtering/processing digitizersMeasurement, 2019
- Streamline calibration modelling for a comprehensive design of ATI-based digitizersMeasurement, 2018
- Compact microstrip lowpass filter using meandered unequal T-shaped resonator with ultra-wide rejection bandAEU - International Journal of Electronics and Communications, 2018
- Discontinuities in Microstrip2016
- Composite microstrip lowpass filter with ultrawide stopband and low insertion lossMicrowave and Optical Technology Letters, 2015
- Compact quasi-elliptic microstrip lowpass filter with wide stopbandElectronics Letters, 2010
- Microwave Engineering2007
- Jitter analysis of high-speed sampling systemsIEEE Journal of Solid-State Circuits, 1990
- Accurate model for open end effect of microstrip linesElectronics Letters, 1981