Christian David Matthus
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Christian David Matthus has a total of 116 co-authors. Here are the top co-authors by number of shared publications:
- Tobias Erlbacher
Nexperia
10 shared publications Anton J. Bauer
Fraunhofer Institute of Integrated Systems and Device Technology (IISB)
7 shared publications- Frank Ellinger
Chair for Circuit Design and Network Theory, Technische Universität Dresden, 01069 Dresden, Germany
7 shared publications Lothar Frey
Friedrich-Alexander-Universität Erlangen
7 shared publications- Hans Kleemann
Dresden Integrated Center for Applied Physics and Photonic Materials (IAPP) Technische Universität Dresden Dresden Germany
3 shared publications - Lautaro N. Petrauskas
Chair for Circuit Design and Network Theory, Technische Universitt Dresden, Dresden, Germany
3 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by IOP Publishing in Neuromorphic Computing and Engineering
- Vol. 6 (3) , 032501
Roadmap for neuromorphic organic devices
Organic materials offer a transformative opportunity for smart edge applications due to their compatibility with large-area manufacturing, mechanical flexibility, scalability at low cost, and potentially reduced environmental impact. While their use in display technologies is now well-established, their integration into other applications domains is still in its early stages. Significant progress has been made in the development of materials for organic neuromorphic devices, enabling explorations of applications in neuroscience, soft robotics and healthcare. Additional promising directions include photonics, optoelectronics and memories. The goal of this roadmap is to consider how the properties of these materials can be leveraged to implement alternative computing methodologies to enable a new generation of organic technologies.
- 1 September 2026
- Published by IOP Publishing in Neuromorphic Computing and Engineering
- Vol. 6 (3) , 032501
Open AccessRoadmap for neuromorphic organic devices
Organic materials offer a transformative opportunity for smart edge applications due to their compatibility with large-area manufacturing, mechanical flexibility, scalability at low cost, and potentially reduced environmental impact. While their use in display technologies is now well-established, their integration into other applications domains is still in its early stages. Significant progress has been made in the development of materials for organic neuromorphic devices, enabling explorations of applications in neuroscience, soft robotics and healthcare. Additional promising directions include photonics, optoelectronics and memories. The goal of this roadmap is to consider how the properties of these materials can be leveraged to implement alternative computing methodologies to enable a new generation of organic technologies.
- 25 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (12) , 10347-10357
A 14.5-mW 10-GS/s 16× Time-Interleaved 7-bit SAR ADC With Low-Power Ring Amplifier Buffers
This article investigates a 10-GS/s 7-bit successive approximation register (SAR) analog-to-digital converter (ADC) with an extremely low power consumption of 14.5-mW using low-power ring amplifiers as buffer in the track-and-hold stage. It is implemented in a 22-nm fully depleted silicon-on-insulator (FD-SOI) technology. This feasibility study is based on 16 time-interleaved loop-unrolled SAR ADC cores utilizing subsampling with a division factor of four for both stages. Since this sampling strategy requires a buffer, different suitable topologies are considered and compared to each other, and it is concluded that the ring amplifier offers the best capabilities in terms of gain, bandwidth, and power consumption. It consists of three inverters and is used here in a switched-capacitor feedback configuration with a voltage gain of 3.5 dB. Its bandwidth exceeds 20 GHz while it consumes only 1.2 mW demonstrating the potential of this amplifier concept in ultralow-power high-speed ADCs. Within the clock tree, a phase correction unit is implemented, which is able to shift the subclocks after the first division in a range of 10 ps. This is achieved by controlling the backgate voltage of an inverter chain and switching additional capacitors to load or unload the internal nodes. Additionally, the gain of each ADC core can be tuned allowing for a very good adjustment of the cores. For this purpose, a digital calibration routine is implemented. Layout aspects are also taken into account and the whole design was optimized for low power consumption. For optimized settings, the signal-to-noise-and-distortion ratio (SNDR) is well above 30 dB for an input frequency of 4.7 GHz, which is close to the Nyquist limit. The power consumption is as low as 14.5 mW for a supply voltage of 0.72 V, which is, to the best of the authors’ knowledge, the lowest reported value for beyond-5-GS/s ADCs today. The respective Walden figure of merit (FoM W ) is 41.6 fJ/conv.step and the Schreier figure of merit (FoM S ) is 147.8 dB. Even in undersampling scenarios with input signals up to approximately 10 GHz sampled with 10 GS/s (second Nyquist zone), the measured SNDR remains above 20 dB. The maximum absolute values of integral nonlinearity (INL) and differential nonlinearity (DNL) are 0.62 LSB and 0.61 LSB, respectively.
- 25 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (12) , 10347-10357
A 14.5-mW 10-GS/s 16× Time-Interleaved 7-bit SAR ADC With Low-Power Ring Amplifier Buffers
This article investigates a 10-GS/s 7-bit successive approximation register (SAR) analog-to-digital converter (ADC) with an extremely low power consumption of 14.5-mW using low-power ring amplifiers as buffer in the track-and-hold stage. It is implemented in a 22-nm fully depleted silicon-on-insulator (FD-SOI) technology. This feasibility study is based on 16 time-interleaved loop-unrolled SAR ADC cores utilizing subsampling with a division factor of four for both stages. Since this sampling strategy requires a buffer, different suitable topologies are considered and compared to each other, and it is concluded that the ring amplifier offers the best capabilities in terms of gain, bandwidth, and power consumption. It consists of three inverters and is used here in a switched-capacitor feedback configuration with a voltage gain of 3.5 dB. Its bandwidth exceeds 20 GHz while it consumes only 1.2 mW demonstrating the potential of this amplifier concept in ultralow-power high-speed ADCs. Within the clock tree, a phase correction unit is implemented, which is able to shift the subclocks after the first division in a range of 10 ps. This is achieved by controlling the backgate voltage of an inverter chain and switching additional capacitors to load or unload the internal nodes. Additionally, the gain of each ADC core can be tuned allowing for a very good adjustment of the cores. For this purpose, a digital calibration routine is implemented. Layout aspects are also taken into account and the whole design was optimized for low power consumption. For optimized settings, the signal-to-noise-and-distortion ratio (SNDR) is well above 30 dB for an input frequency of 4.7 GHz, which is close to the Nyquist limit. The power consumption is as low as 14.5 mW for a supply voltage of 0.72 V, which is, to the best of the authors’ knowledge, the lowest reported value for beyond-5-GS/s ADCs today. The respective Walden figure of merit (FoM W ) is 41.6 fJ/conv.step and the Schreier figure of merit (FoM S ) is 147.8 dB. Even in undersampling scenarios with input signals up to approximately 10 GHz sampled with 10 GS/s (second Nyquist zone), the measured SNDR remains above 20 dB. The maximum absolute values of integral nonlinearity (INL) and differential nonlinearity (DNL) are 0.62 LSB and 0.61 LSB, respectively.
- Open Access
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 65389-65402
Microstrip-Based Anti-Aliasing Filters for Beyond-50 GHz-Bandwidth Mix-Filter-Sample Analog-to-Digital-Converters
High performance anti-aliasing filters (AAF) are critical components of advanced frequency interleaved (FI) analog-to-digital converter (ADC) structures, which are capable of overcoming the sample-clock jitter limit for ultra-high speed power efficient ADCs exceeding 100 GS/s as is necessary in future radio frequency systems. Employing printed circuit board (PCB) microstrip filters is a promising approach as they offer a highly precise low-cost solution. In face of the specific requirements of the FI-ADC on the AAF amplitude response, the stepped impedance approach is shown to be much more suitable than other common approaches for wide stopband filters. The solution to neutralizing the spurious pass bands by placing them in the samplers’ mute frequency regions is introduced. Due to the high cutoff frequencies, typically beyond 8 GHz, parasitics and lateral resonances become significant however. Hence, a novel compensation method is presented that integrates well with the required amplitude response, by reinterpreting the longitudinal low-Z-sections as individual lateral microstrips. To prove the proposed method, the design, simulation, and physical implementation of such AAFs are carried out in the context of a state-of-the-art beyond-20 GS/s 7 bit sub-ADC core and a baseband processing bandwidth of 7 GHz. The measurement results confirm the behavior predicted by the analytical models and EM simulations, and therefore the suitability of the method for designing AAFs for FI-ADCs.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 65389-65402
Open AccessMicrostrip-Based Anti-Aliasing Filters for Beyond-50 GHz-Bandwidth Mix-Filter-Sample Analog-to-Digital-Converters
High performance anti-aliasing filters (AAF) are critical components of advanced frequency interleaved (FI) analog-to-digital converter (ADC) structures, which are capable of overcoming the sample-clock jitter limit for ultra-high speed power efficient ADCs exceeding 100 GS/s as is necessary in future radio frequency systems. Employing printed circuit board (PCB) microstrip filters is a promising approach as they offer a highly precise low-cost solution. In face of the specific requirements of the FI-ADC on the AAF amplitude response, the stepped impedance approach is shown to be much more suitable than other common approaches for wide stopband filters. The solution to neutralizing the spurious pass bands by placing them in the samplers’ mute frequency regions is introduced. Due to the high cutoff frequencies, typically beyond 8 GHz, parasitics and lateral resonances become significant however. Hence, a novel compensation method is presented that integrates well with the required amplitude response, by reinterpreting the longitudinal low-Z-sections as individual lateral microstrips. To prove the proposed method, the design, simulation, and physical implementation of such AAFs are carried out in the context of a state-of-the-art beyond-20 GS/s 7 bit sub-ADC core and a baseband processing bandwidth of 7 GHz. The measurement results confirm the behavior predicted by the analytical models and EM simulations, and therefore the suitability of the method for designing AAFs for FI-ADCs.
- Open Access
- 16 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (17)
Organic Permeable Base Transistors—Reliable Large‐Scale Anodization for High Frequency Devices
Organic permeable base transistors (OPBTs) have demonstrated impressive performance and potential in various applications, such as display driving circuits, light‐emitting transistors, and logic circuits requiring high‐frequency operation. However, large‐scale implementation is hindered by fabrication reliability and repeatability issues, a problem also common with other types of organic transistors, leading to reliance on exceptional “hero” devices. To address this challenge, an electrochemical anodization process is scaled up and optimized for OPBTs to produce consistent performance across an entire 15 cm × 15 cm wafer. By controlling the Al base oxidation, an 87% yield of functional devices and a median transconductance of d−3is achieved S, proving that the anodization process does not degrade the device performance. Additionally, anodization reduces leakage current to below d−9A, increasing the current gain to a median of 106, and decreases the oxide capacitance (Cox) without affecting the transconductance (gm), resulting in a driving‐voltage normalized unity‐gain cutoff frequency (fT/V) of up to 2.6 MHzV−1. The validity of the experimental results is confirmed through properly calibrated technology computer‐aided design (TCAD) simulations, which rely on DC and small‐signal AC analysis of OPBTs, based on the underlying physical equations.
- 16 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (17)
Open AccessOrganic Permeable Base Transistors—Reliable Large‐Scale Anodization for High Frequency Devices
Organic permeable base transistors (OPBTs) have demonstrated impressive performance and potential in various applications, such as display driving circuits, light‐emitting transistors, and logic circuits requiring high‐frequency operation. However, large‐scale implementation is hindered by fabrication reliability and repeatability issues, a problem also common with other types of organic transistors, leading to reliance on exceptional “hero” devices. To address this challenge, an electrochemical anodization process is scaled up and optimized for OPBTs to produce consistent performance across an entire 15 cm × 15 cm wafer. By controlling the Al base oxidation, an 87% yield of functional devices and a median transconductance of d−3is achieved S, proving that the anodization process does not degrade the device performance. Additionally, anodization reduces leakage current to below d−9A, increasing the current gain to a median of 106, and decreases the oxide capacitance (Cox) without affecting the transconductance (gm), resulting in a driving‐voltage normalized unity‐gain cutoff frequency (fT/V) of up to 2.6 MHzV−1. The validity of the experimental results is confirmed through properly calibrated technology computer‐aided design (TCAD) simulations, which rely on DC and small‐signal AC analysis of OPBTs, based on the underlying physical equations.
- Open Access
- 22 March 2024
- Published by Elsevier in Micro and Nano Engineering
- Vol. 23
2D BDiode – A switchable bidirectional diode for analog electronic circuits fabricated entirely from 2D materials
- 22 March 2024
- Published by Elsevier in Micro and Nano Engineering
- Vol. 23
Open Access2D BDiode – A switchable bidirectional diode for analog electronic circuits fabricated entirely from 2D materials
- Open Access
- 26 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 11, 359-366
I-V-T Characteristics and Temperature Sensor Performance of a Fully 2-D WSe2/MoS2 Heterojunction Diode at Cryogenic Temperatures
In this work, we demonstrate the usability of a fully-2D-material based device consisting of MoS2/WSe2 heterojunction encapsulated by hBN and contacted by graphene as temperature sensor for linear temperature measurement at cryogenic temper-atures. More precisely, temperatures in the range of 10 K up to 300 K were applied to the device while recording the I-V charac-teristics. In contrast to the classical expectation, the main current flows through the device when it is reversely biased. We ascribe this to a combination of drift-diffusion and band-to-band tunnel-ing, while for very low temperatures (T < 100 K), variable-range hopping or trap-assisted tunneling seems dominant. In case of for-ward bias, the Schottky contact on the WSe2-anode hinders the charge transport in the voltage range of interest. Additionally, we obtained the activation energy of the saturation current in reverse direction in an Arrhenius diagram. Depending on the bias level, it varies between 100 meV and 300 meV, which may be related to the energy barrier caused by interface traps, generation centers be-tween both semiconducting 2D materials, and the band-to-band tunneling. Furthermore, we investigated the temperature-sensor performance by applying a constant current to the device and measuring the voltage drop at different temperatures. In the range of 40 K up to 300 K, the sensitivity of the sensor is 2 mV/K, which is comparable to Si devices, while the linearity is still lower (R2 0.94). On the other hand, the demonstrated device consists only of 2D materials and is, thus, substrate independent, very thin, and can potentially be fabricated on a fully flexible substrate in a low-cost process.
- 26 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 11, 359-366
Open AccessI-V-T Characteristics and Temperature Sensor Performance of a Fully 2-D WSe2/MoS2 Heterojunction Diode at Cryogenic Temperatures
In this work, we demonstrate the usability of a fully-2D-material based device consisting of MoS2/WSe2 heterojunction encapsulated by hBN and contacted by graphene as temperature sensor for linear temperature measurement at cryogenic temper-atures. More precisely, temperatures in the range of 10 K up to 300 K were applied to the device while recording the I-V charac-teristics. In contrast to the classical expectation, the main current flows through the device when it is reversely biased. We ascribe this to a combination of drift-diffusion and band-to-band tunnel-ing, while for very low temperatures (T < 100 K), variable-range hopping or trap-assisted tunneling seems dominant. In case of for-ward bias, the Schottky contact on the WSe2-anode hinders the charge transport in the voltage range of interest. Additionally, we obtained the activation energy of the saturation current in reverse direction in an Arrhenius diagram. Depending on the bias level, it varies between 100 meV and 300 meV, which may be related to the energy barrier caused by interface traps, generation centers be-tween both semiconducting 2D materials, and the band-to-band tunneling. Furthermore, we investigated the temperature-sensor performance by applying a constant current to the device and measuring the voltage drop at different temperatures. In the range of 40 K up to 300 K, the sensitivity of the sensor is 2 mV/K, which is comparable to Si devices, while the linearity is still lower (R2 0.94). On the other hand, the demonstrated device consists only of 2D materials and is, thus, substrate independent, very thin, and can potentially be fabricated on a fully flexible substrate in a low-cost process.
- 10 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (9) , 3841-3851
A 1.38-mW 7-bit 1.7-GS/s Single-Channel Loop-Unrolled SAR ADC in 22-nm FD-SOI With 8.85 fJ/Conv.-Step for GHz Mobile Communication and Radar Systems
A 7-bit single-channel loop-unrolled successive approximation register (SAR) analog-to-digital converter (ADC) with a sampling rate of 1.7 GS/s at a power consumption of 1.38 mW is presented. To prove the concept, the circuit was fabricated in a 22-nm fully depleted silicon-on-insulator (FD-SOI) technology. It achieves an effective number of bits (ENOB) of 6.52 and a Walden figure-of-merit () of 8.85 fJ/conv.-step. High sampling speed is achieved by introducing optimized logic, heavily employing dynamic logic for the critical building blocks as the memory cells and clock logic. Sharing of reset transistors between multiple memory cells further reduces the delay between comparator decision and switching of the capacitive digital-to-analog converter (CDAC) by 15%. For calibration of the comparator offset, tuning of the back-gate voltage available in the FD-SOI technology is investigated and employed. Compared with conventional approaches using a separate differential input pair, this reduces the comparator power dissipation by 5% and its noise by 10%. The ADC operates on a single 800-mV supply and uses an active area of 0.0022 mm 2 . The ADC is the fastest $>$ 6-bit ENOB single-channel SAR (or pipelined SAR) ADC, while at the same time achieving the best for any previously reported ADC above 1 GS/s.
- 10 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (9) , 3841-3851
A 1.38-mW 7-bit 1.7-GS/s Single-Channel Loop-Unrolled SAR ADC in 22-nm FD-SOI With 8.85 fJ/Conv.-Step for GHz Mobile Communication and Radar Systems
A 7-bit single-channel loop-unrolled successive approximation register (SAR) analog-to-digital converter (ADC) with a sampling rate of 1.7 GS/s at a power consumption of 1.38 mW is presented. To prove the concept, the circuit was fabricated in a 22-nm fully depleted silicon-on-insulator (FD-SOI) technology. It achieves an effective number of bits (ENOB) of 6.52 and a Walden figure-of-merit () of 8.85 fJ/conv.-step. High sampling speed is achieved by introducing optimized logic, heavily employing dynamic logic for the critical building blocks as the memory cells and clock logic. Sharing of reset transistors between multiple memory cells further reduces the delay between comparator decision and switching of the capacitive digital-to-analog converter (CDAC) by 15%. For calibration of the comparator offset, tuning of the back-gate voltage available in the FD-SOI technology is investigated and employed. Compared with conventional approaches using a separate differential input pair, this reduces the comparator power dissipation by 5% and its noise by 10%. The ADC operates on a single 800-mV supply and uses an active area of 0.0022 mm 2 . The ADC is the fastest $>$ 6-bit ENOB single-channel SAR (or pipelined SAR) ADC, while at the same time achieving the best for any previously reported ADC above 1 GS/s.
- Open Access
- 24 January 2023
- Published by Wiley
A 2.5 GS/s, 7-bit time-interleaved SAR ADC with real-time data output
This letter presents the design and measurement results of a 2.5 GS/s 7-bit successive approximation register (SAR) analog-to-digital converter (ADC) with real-time data output via the JESD204B protocol using two lanes at 12.5 Gb/s each. The ADC is implemented in a 22-nm fully-depleted silicon-on-insulator (FDSOI) technology and consists of four time interleaved ADC cores. It consumes 43 mW overall, while the analog frontend including the four ADC cores and the interleaver consumes only 7.8 mW. In the first Nyquist zone, the effective number of bits (ENOB) is larger than 6.1 bit leading to a Walden Figure-of-Merit (FOM_W) of 45 fJ/conv.-step and a Schreier Figure-of-Merit (FOM_S) of 150.5 dB. Integral (INL) and differential nonlinearity (DNL) are both well below 0.5 LSB for all measurement scenarios.
- 24 January 2023
- Published by Wiley
Open AccessA 2.5 GS/s, 7-bit time-interleaved SAR ADC with real-time data output
This letter presents the design and measurement results of a 2.5 GS/s 7-bit successive approximation register (SAR) analog-to-digital converter (ADC) with real-time data output via the JESD204B protocol using two lanes at 12.5 Gb/s each. The ADC is implemented in a 22-nm fully-depleted silicon-on-insulator (FDSOI) technology and consists of four time interleaved ADC cores. It consumes 43 mW overall, while the analog frontend including the four ADC cores and the interleaver consumes only 7.8 mW. In the first Nyquist zone, the effective number of bits (ENOB) is larger than 6.1 bit leading to a Walden Figure-of-Merit (FOM_W) of 45 fJ/conv.-step and a Schreier Figure-of-Merit (FOM_S) of 150.5 dB. Integral (INL) and differential nonlinearity (DNL) are both well below 0.5 LSB for all measurement scenarios.
- Open Access
- 2 August 2022
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 50 (12) , 4179-4190
Chopping for over 50 MHz gain‐bandwidth product current sense amplifiers achieving input noise level of 8.5 nV/√Hz
An accurate, high‐speed, fully differential difference amplifier for current sensing utilizing the chopper approach was implemented in a 0.18 μm complementary metal‐oxide‐semiconductor (CMOS) technology. Unlike state‐of‐the‐art solutions, we use a higher chopping frequency in the MHz range due to the bandwidth requirements of the introduced circuits for the latter application, namely, low‐side phase‐current measurement in motor control circuits. Except the low‐pass filter (LPF) effect of the output stage, no additional LPF was integrated in hardware at the output of the circuits. We show that on the other hand a digital LPF, which can be integrated in the field‐programmable gate‐array (FPGA) logic or microcontroller used for the motor control, offers a higher flexibility in terms of filter design. Weak input signals of only few mV can be reconstructed with a high accuracy. This is demonstrated for a 500 kHz rectangular signal and a chopping frequency of 20 MHz. Note that an input‐signal frequency of several hundreds of kHz with harmonics in the MHz region is very challenging for chopper amplifiers. Still, a significant decrease of the input‐referred noise is demonstrated, especially cancelling out the 1/f‐noise achieving a remaining noise floor of approximately 8.5 nV/√Hz. Overall, the input‐referred noise level can be pushed far below 50 μV (root mean square). Moreover, using a quite relaxed second‐order Butterworth filter with a 3 dB corner frequency of 1 MHz, input‐referred noise levels of 10 μV (root mean square) can be easily achieved at the costs of reduced bandwidth. The lowest achieved input offset is 50 μV. The gain is adjusted by resistive feedback and is approximately 40 dB. Hence, the amplifier is suitable for current sensing in motor control circuits, and a significant reduction of the shunt resistance typically used for this purpose will be possible.
- 2 August 2022
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 50 (12) , 4179-4190
Open AccessChopping for over 50 MHz gain‐bandwidth product current sense amplifiers achieving input noise level of 8.5 nV/√Hz
An accurate, high‐speed, fully differential difference amplifier for current sensing utilizing the chopper approach was implemented in a 0.18 μm complementary metal‐oxide‐semiconductor (CMOS) technology. Unlike state‐of‐the‐art solutions, we use a higher chopping frequency in the MHz range due to the bandwidth requirements of the introduced circuits for the latter application, namely, low‐side phase‐current measurement in motor control circuits. Except the low‐pass filter (LPF) effect of the output stage, no additional LPF was integrated in hardware at the output of the circuits. We show that on the other hand a digital LPF, which can be integrated in the field‐programmable gate‐array (FPGA) logic or microcontroller used for the motor control, offers a higher flexibility in terms of filter design. Weak input signals of only few mV can be reconstructed with a high accuracy. This is demonstrated for a 500 kHz rectangular signal and a chopping frequency of 20 MHz. Note that an input‐signal frequency of several hundreds of kHz with harmonics in the MHz region is very challenging for chopper amplifiers. Still, a significant decrease of the input‐referred noise is demonstrated, especially cancelling out the 1/f‐noise achieving a remaining noise floor of approximately 8.5 nV/√Hz. Overall, the input‐referred noise level can be pushed far below 50 μV (root mean square). Moreover, using a quite relaxed second‐order Butterworth filter with a 3 dB corner frequency of 1 MHz, input‐referred noise levels of 10 μV (root mean square) can be easily achieved at the costs of reduced bandwidth. The lowest achieved input offset is 50 μV. The gain is adjusted by resistive feedback and is approximately 40 dB. Hence, the amplifier is suitable for current sensing in motor control circuits, and a significant reduction of the shunt resistance typically used for this purpose will be possible.
- 12 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 313-316
Complementary High-Voltage Compliant High-Current Output Stages for PoDL
This paper presents the design of two complementary high-voltage compliant high-current output stages manufactured in an 0.18 $\mu$m high-voltage CMOS technology. The proposed circuits provide a high-voltage compliant monolithic interface for conventional current-steering digital-to-analog converters in the context of Power over Data Lines (PoDL) for Automotive Ethernet. The proposed output stages differ in their function as current sink or current source. Both are composed of improved active-feedback cascode current mirrors with a very large input to output current ratio of 1:50. The current source is the first reported high-voltage compliant current source featuring this topology in a two-stage design. Both circuits offer the widest reported output range for high-voltage compliant current output stages at 500 mA. With a passband gain of 34 dB, both proposed circuits do also extend the state-of-the-art in terms of the achieved gain-bandwidth product at 544 MHz and 656 MHz respectively.
- 12 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 313-316
Complementary High-Voltage Compliant High-Current Output Stages for PoDL
This paper presents the design of two complementary high-voltage compliant high-current output stages manufactured in an 0.18 $\mu$m high-voltage CMOS technology. The proposed circuits provide a high-voltage compliant monolithic interface for conventional current-steering digital-to-analog converters in the context of Power over Data Lines (PoDL) for Automotive Ethernet. The proposed output stages differ in their function as current sink or current source. Both are composed of improved active-feedback cascode current mirrors with a very large input to output current ratio of 1:50. The current source is the first reported high-voltage compliant current source featuring this topology in a two-stage design. Both circuits offer the widest reported output range for high-voltage compliant current output stages at 500 mA. With a passband gain of 34 dB, both proposed circuits do also extend the state-of-the-art in terms of the achieved gain-bandwidth product at 544 MHz and 656 MHz respectively.