Design and Test of 40-kV/2-kA DC Superconducting Fault Current Limiter
- 20 April 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (6) , 1-5
Abstract
In this paper, a general scheme of a 40 kV/2 kA resistive type DC superconducting fault current limiter (SFCL) is suggested, which could be utilized to suppress the surge current caused by short-circuit faults in voltage-source-converter HVDC (VSC-HVDC) power grids. This DC SFCL is designed and fabricated with 6 coil modules in parallel and 4 in series. In order to investigate the current-limiting performance of the DC SFCL under the rapidly rising fault current, the SFCL is tested on the platform with a pulsed DC impact generator. Besides the property of current limitation, the current capacity, insulation and quench recovery performance of such SFCL are also tested. Results indicate that the critical current of SFCL is larger than 2050 A at 69 K, and the DC withstand voltage is larger than 74 kV in 2 hours. During the 9kV DC impact test, the short-circuit current could be limited to 8842 A, and the quench recovery time is less than 200ms.Keywords
Funding Information
- National Key Basic Research Program of China (2015CB251005)
- Key Research Project of Frontier Science of the Chinese Academy of Sciences (QYZDJ-SSW-JSC025)
- National Natural Science Foundation of China (51721005)
This publication has 11 references indexed in Scilit:
- Status of the European Union Project FASTGRIDIEEE Transactions on Applied Superconductivity, 2019
- Design and Test of 10 kV/400 A Flux-Coupling-Type Superconducting Fault Current Limiting ModuleIEEE Transactions on Applied Superconductivity, 2018
- Investigation of Flux-Coupling Type Superconducting Fault Current Limiter With Multiple Parallel BranchesIEEE Transactions on Applied Superconductivity, 2016
- AmpaCity — Advanced superconducting medium voltage system for urban area power supply2014
- Analysis of 3-Phase Superconducting Fault Current Limiters in Power Systems With Inhomogeneous QuenchingIEEE Transactions on Applied Superconductivity, 2013
- HVDC Circuit Breakers: A Review Identifying Future Research NeedsIEEE Transactions on Power Delivery, 2011
- Numerical Analysis of the Current and Voltage Sharing Issues for Resistive Fault Current Limiter Using YBCO Coated ConductorsIEEE Transactions on Applied Superconductivity, 2010
- Development of Resistive Fault Current Limiters Based on YBCO Coated ConductorsIEEE Transactions on Applied Superconductivity, 2009
- Development of a 13.2 kV/630 A (8.3 MVA) High Temperature Superconducting Fault Current LimiterIEEE Transactions on Applied Superconductivity, 2008
- Basic design of 22.9kV/630A resistive superconducting fault current limiting coil using YBCO coated conductorPhysica C: Superconductivity and its Applications, 2007