Evaluation of Almond Shell Activated Carbon for Dyes (Methylene Blue and Green Malachite) Removal by Experimental and Simulation Studies
Preprint
- 4 November 2024
- preprint
- Published by MDPI AG in Preprints.org
Abstract
The present work analyses the behaviour of an activated carbon fabricated from almond shell for the removal of cationic dyes (methylene blue and malachite green) by adsorption from aqueous solutions. The carbonized precursor was activated with KOH at a 1:1 (w/w) ratio with the objective of increasing both surface area and pore volume. Both non-activated and activated carbon were characterized in different aspects of interest in dye adsorption studies (surface structure, point of zero charge, surface area, pore size distribution). The effect of dye initial concentration and adsorbent dosage upon dye removal efficiency and carbon adsorption capacity has been studied. Adsorption kinetics was analysed under different experimental conditions and different models were essayed to determine the adsorption mechanism. Dye adsorption in the adsorbent surface could be considered the rate-limiting step. Adsorption equilibrium isotherms have also been obtained, and Langmuir and Freundlich equations showed the best fitting to the experimental data. Moreover, Adsorption kinetic and equilibrium data have been used to simulate breakthrough curves in a packed-bed column using different conditions (bed length, liquid flowrate, dye initial concentration). Simulation results showed that almond shell activated carbon is a suitable adsorbent for methylene blue and malachite green removal from wastewater.Keywords
All Related Versions
- Version 1, 2024-11-04, Preprints
- Published version: Materials, 17 (24), 6077.
This publication has 31 references indexed in Scilit:
- Preparation of activated carbon from pine (Pinus radiata) sawdust by chemical activation with zinc chloride for wood dye adsorptionBiomass Conversion and Biorefinery, 2023
- Adsorption of Malachite Green onto Walnut Shells: Kinetics, Thermodynamic, and Regeneration of the Adsorbent by Chemical ProcessFibers and Polymers, 2023
- Dynamic simulation of lead(II) metal adsorption from water on activated carbons in a packed-bed columnBiomass Conversion and Biorefinery, 2022
- Development of activated carbon from KOH activation of pre-carbonized chickpea peel residue and its performance for removal of synthetic dye from drinking waterBiomass Conversion and Biorefinery, 2021
- Water purification using activated carbon prepared from agriculture waste — overview of a recent developmentBiomass Conversion and Biorefinery, 2021
- Adsorption of malachite green by activated carbon derived from gasified Hevea brasiliensis rootArabian Journal of Chemistry, 2021
- Adsorption studies of packed bed column for the removal of dyes using amine functionalized radiation induced grafted fiberSN Applied Sciences, 2019
- Ultra-microporous adsorbents prepared from vine shoots-derived biochar with high CO2 uptake and CO2/N2 selectivityChemical Engineering Journal, 2018
- Metal sorption by algal biomass: From batch to continuous systemAlgal Research, 2016
- Comparison between activated carbon, carbon xerogel and carbon nanotubes for the adsorption of the antibiotic ciprofloxacinCatalysis Today, 2012