Evaluation of Almond Shell Activated Carbon for Dye (Methylene Blue and Malachite Green) Removal by Experimental and Simulation Studies
Open Access
- 12 December 2024
- Vol. 17 (24) , 6077
Abstract
The present work analyzes the behavior of an activated carbon fabricated from almond shells for the removal of cationic dyes (methylene blue, MB, and malachite green, MG) by adsorption from aqueous solutions. The carbonized precursor was activated with KOH at a 1:2 (w/w) ratio with the objective of increasing both the surface area and the pore volume. Both non-activated and activated carbon were characterized in different aspects of interest in dye adsorption studies (surface structure, point of zero charge, specific surface area, and pore size distribution). The effect of the dye’s initial concentration and adsorbent dosage on dye removal efficiency and carbon adsorption capacity was studied. Adsorption kinetics were analyzed under different experimental conditions, and different models were assayed to determine the adsorption mechanism. Dye adsorption in the adsorbent surface could be considered the rate-limiting step. Different adsorption equilibrium models were evaluated to fit the experimental data. This adsorbent allowed us to reach high Langmuir adsorption capacity for both dyes (MB: 341 mg·g−1, MG: 364 mg·g−1 at 25 °C and 0.5 g·L−1). Moreover, kinetic and equilibrium adsorption data have been used to simulate breakthrough curves in a packed-bed column using different conditions (bed length, liquid flowrate, and dye initial concentration). The simulation results showed that almond shell activated carbon is a suitable adsorbent for methylene blue and malachite green removal from wastewater.Keywords
All Related Versions
Funding Information
- Xunta de Galicia (ED431B 2020/039, PID2021-122923NB-I00)
- MICIN/AEI/FEDER (ED431B 2020/039, PID2021-122923NB-I00)
This publication has 35 references indexed in Scilit:
- Adsorption of Malachite Green onto Walnut Shells: Kinetics, Thermodynamic, and Regeneration of the Adsorbent by Chemical ProcessFibers and Polymers, 2023
- Dynamic simulation of lead(II) metal adsorption from water on activated carbons in a packed-bed columnBiomass Conversion and Biorefinery, 2022
- Development of activated carbon from KOH activation of pre-carbonized chickpea peel residue and its performance for removal of synthetic dye from drinking waterBiomass Conversion and Biorefinery, 2021
- Water purification using activated carbon prepared from agriculture waste — overview of a recent developmentBiomass Conversion and Biorefinery, 2021
- Adsorption isotherm modeling for methylene blue removal onto magnetic kaolinite clay: a comparison of two-parameter isothermsApplied Water Science, 2021
- Adsorption of malachite green by activated carbon derived from gasified Hevea brasiliensis rootArabian Journal of Chemistry, 2021
- Adsorption studies of packed bed column for the removal of dyes using amine functionalized radiation induced grafted fiberSN Applied Sciences, 2019
- Usability of activated carbon with well-developed mesoporous structure for the decontamination of malachite green from aquatic environments: kinetic, equilibrium and regeneration studiesJournal of Porous Materials, 2017
- Metal sorption by algal biomass: From batch to continuous systemAlgal Research, 2016
- Comparison between activated carbon, carbon xerogel and carbon nanotubes for the adsorption of the antibiotic ciprofloxacinCatalysis Today, 2012