Abstract
This paper describes an operation mode for the stabilization of a five degree of freedom active magnetic bearing system in the case of a damaged radial actuator. The proposed method has the task to stabilize the under-actuated rotor to ensure a safe deceleration. The resulting under-actuated system is not reachable for the admissible angular velocity range. Thus, the rotor could be destabilized for some operating points. However, for a real system with a non ideal isotropic magnetic behavior, the system is reachable for all angular velocities. For the stabilization of the under-actuated system PID controllers are used. The parameters of the PID controllers are calculated using the LQR method. This simple realization of the controllers implies a short computing time. To show the stability and the robustness of the designed controllers different root loci are visualized. The proposed operating mode is able to prevent the safety bearings from wear and damage in the case of a defective magnetic actuator. Finally, the under-actuated operation mode is experimentally validated on a turbomolecular pump, where the center of gravity is not located between the magnetic actuators.

This publication has 30 references indexed in Scilit: