Study on the Effect of Initial Delamination on Tensile Behavior of Offshore Wind Turbine Blade Spar Cap
Open Access
Abstract
Delamination damage to spar caps seriously endangers the operation safety of offshore wind turbines. The effect of initial delamination of various depths and areas on the ultimate tensile load of laminates is studied based on experiments and numerical simulation, and an effective method for predicting the residual tensile strength of laminates with high thickness is proposed. Three groups of initial delamination specimens with different characteristics were fabricated, and static displacement tensile tests were carried out. An accurate three-dimensional numerical analysis model was established, and the results were in good agreement with the experimental values, with the overall error of the failure load being less than 6%. Furthermore, a numerical model for a 20-ply high-thickness spar cap laminate was established to predict the effect of delamination on tensile strength. The results showed that, for the same depth of initial delamination, the difference in delamination area had little influence on the tensile strength. The dangerous locations of delamination were at the shallow surface and at the ratio of 0.3–0.4 in the thickness direction, and the maximum decrease in tensile strength was 14.86%; meanwhile, it was found that delamination on the middle surface had no significant effect on tensile strength.Keywords
Funding Information
- National Natural Science Foundation of China (52175105, LJKMZ20220486)
- Basic Scientific Research Project of Liaoning Province (52175105, LJKMZ20220486)
This publication has 28 references indexed in Scilit:
- Toward local identification of cohesive zone models using digital image correlationEuropean Journal of Mechanics - A/Solids, 2012
- The current state of offshore wind energy technology developmentEnergy, 2012
- Prediction of the cohesive strength for numerically simulating composite delamination via CZM-based FEMComposites Part B: Engineering, 2011
- Delamination Effect on Bending Behaviour in Carbon–Epoxy CompositesStrain, 2011
- Structural collapse of a wind turbine blade. Part B: Progressive interlaminar failure modelsComposites Part A: Applied Science and Manufacturing, 2010
- Structural collapse of a wind turbine blade. Part A: Static test and equivalent single layered modelsComposites Part A: Applied Science and Manufacturing, 2010
- Structural health monitoring for a wind turbine system: a review of damage detection methodsMeasurement Science and Technology, 2008
- Prediction of Delamination in Wind Turbine Blade Structural DetailsJournal of Solar Energy Engineering, 2003
- A Progressive Damage Model for Mechanically Fastened Joints in Composite LaminatesJournal of Composite Materials, 1999
- Failure Criteria for Unidirectional Fiber CompositesJournal of Applied Mechanics, 1980