Thermal analysis of two-level wind power converter under symmetrical grid fault
Authors:
- 1 November 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1553572X,p. 1904-1909
Abstract
In this paper, the case of symmetrical grid fault when using the multi-MW wind turbine of partial-scale and full-scale two-level power converter are designed and investigated. Firstly, the different operation behaviors of the relevant power converters under the voltage dip will be described and analyzed. Simulations of different configurations regarding the loss distribution and the junction temperature of the power device are presented in respect to the various voltage dips. It is concluded that for both systems the power loss will change dramatically during the Low-Voltage Ride Through (LVRT) condition as well as the junction temperature. For the full-scale wind turbine system, the most thermal stressed power device in the grid-side converter will appear at the grid voltage below 0.5 pu, and for the partial-scale wind turbine system, the most thermal stressed power device in the rotor-side converter will appear around 0.6 pu grid voltage.Keywords
This publication has 11 references indexed in Scilit:
- Thermal profile analysis of Doubly-Fed induction generator based wind power converter with air and liquid cooling methods2013
- Thermal behavior optimization in multi-MW wind power converter by reactive power circulation2013
- Reactive Power Influence on the Thermal Cycling of Multi-MW Wind Power InverterIEEE Transactions on Industry Applications, 2013
- Thermal analysis of multi-MW two-level wind power converter2012
- Overview of Multi-MW Wind Turbines and Wind ParksIEEE Transactions on Industrial Electronics, 2011
- Ride Through of Wind Turbines With Doubly Fed Induction Generator Under Symmetrical Voltage DipsIEEE Transactions on Industrial Electronics, 2009
- A review of grid code technical requirements for wind farmsIET Renewable Power Generation, 2009
- Rotor Voltage Dynamics in the Doubly Fed Induction Generator During Grid FaultsIEEE Transactions on Power Electronics, 2009
- Control of a Doubly Fed Induction Generator in a Wind Turbine During Grid Fault Ride-ThroughIEEE Transactions on Energy Conversion, 2006
- Power electronics as efficient interface in dispersed power generation systemsIEEE Transactions on Power Electronics, 2004