Influence of Processing Conditions on the Micro-Mechanical Properties of Particulate-Reinforced Aluminium Matrix Composites
Open Access
- 1 May 2008
- journal article
- research article
- Published by SAGE Publications in Advanced Composites Letters
- Vol. 17 (3)
Abstract
During processing, metal matrix attempts to deform and this deformation plays the key role in the microstructural events of segregation and precipitation at the matrix-reinforcement interface. The important aspect of this behaviour is to identify the strengthening micro-characteristics which enhance the material's interphasial reactions in order to improve the bonding properties of the matrix-reinforcement interface. This work focuses on the non-equilibrium segregation which arises due to imbalances in point defect concentrations set up around interfaces during non-equilibrium heat treatment processing of SiC particle reinforced aluminium matrix composites. The important factors affecting the heat treatment process are the temperature, the cooling rate, the concentration of solute atoms and the binding energy between solute atoms and vacancies. Aluminium – silicon – magnesium alloy matrix reinforced with varying amounts of silicon carbide particles were used in this study. Samples in the as-received and heat treated condition were examined by microstructural and microhardness analyses. Based on the analysis, it has been observed that the macroscopic mechanical behaviour of the composite is influenced by several factors including the manufacturing process, the processing conditions, the inter-particle distance, as well as the mean size and the percentage of reinforcement.Keywords
This publication has 4 references indexed in Scilit:
- Experiments and analysis of fiber fragmentation in single and multiple-fiber SiC/Ti-6Al-4V metal matrix compositesComposites Part B: Engineering, 1998
- Fracture strength and damage progression of the fiber/matrix interfaces in titanium-based MMCs with different interfacial layersComposites Part B: Engineering, 1998
- Microstructures and age hardenability of AL-5%si-0.2%Mg based composites reinforced with particulate SiCComposites Science and Technology, 1997
- Effect of dispersoid loading on porosity and Mg distribution in 6061-3% MgSiCp compositesScripta Metallurgica et Materialia, 1993