SHSyed T. Hasan

Syed T. Hasan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Syed T. Hasan has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analytical solution of isothermal fatigue crack growth in solid cylinder

    by M. A. Nasser, S. T. Hasan, Syed A. A. Shah

    Nowadays many industries deal with components which are subjected to high loads at elevated temperatures than before due to the increasing requirements regarding weight and performance. The simplest process to check the behaviour of the material at high temperature is the isothermal fatigue (IF), by designing a fatigue cycle at constant and uniform temperature to estimate stress-strain required to predict fatigue life of the material. Generally it is assumed that the maximum temperature in the loading cycle represents the most damaging condition likely to be experienced during service life of the component. An empirical IF model for solid cylinder subjected to constant temperature superimposed with sinusoidal mechanical load applied at different stress levels is being proposed. Linear equations are developed to describe the severity of the temperature gradient, thermal stresses, and stress and strain intensity factors through the solid cylinder wall as function of time. Results show the effect of temperature can be explained as increase in von Mises thermal stress increase as a function of increasing temperature. The highest stress at 400 °C recorded is due to inherent hardness increase of the material indicated by high modulus of elasticity. The mechanical stress is more effective than thermal loading and results show that the stress intensity factor decreases with temperature, except at 400 °C (due to hardness increase).

  • An empirical method of calculating interfacial strength in a second phase reinforced alloy

    by Syed A. A. Shah, Syed T. Hasan

    Innovations in MMCs are beginning to pay off with new military and commercial developments underway. Engineered solutions, capitalising on the advantages of lightweight and effective thermal performance, are proving the superiority of MMCs over traditional approaches and materials. As a technology-driven 21st century dawns, demand for better performance, productivity and/or efficiency in transportation, aerospace and industrial processes/products will increasingly require the use of these remarkable composite materials. The understanding of the interfacial strengthening mechanisms, therefore, is the key factor for optimising the properties of these remarkable new advanced materials. A method of calculation has been applied in order to predict the interfacial fracture strength of aluminium, in the presence of silicon segregation. The interface fracture toughness was determined as a function of the macroscopic experimental measurements (mechanical properties of the composite) and the microscopic modification parameters (tailoring of interface properties). The model shows success in making prediction possible of trends in relation to segregation and interfacial fracture strength behaviour in SiC particle-reinforced aluminium matrix composites. The model developed here can be used to predict possible trends in relation to segregation and the interfacial fracture strength behaviour in metal matrix composites. The results obtained from this work conclude that the role of precipitation and segregation on the mechanical properties of Al/SiC composites is crucial, affecting overall mechanical behaviour.

  • Predicting Micro-Mechanics Damage Behaviour at a Metal-Ceramic Interface in a Reinforced Alloy

    by Syed A.A. Shah, Syed T. Hasan

    The performance of metal matrix composites (MMCs) depends critically on the quality of the matrix-reinforcement interface. The nature of the interface in turn depends on the processing of the MMCs. At the micro-level, local concentration gradients around the reinforcement are being developed during processing and due to the metal matrix attempting to deform during deformation which can be very different to the nominal conditions. This plays a crucial role in the development of micro-structural events such as segregation and precipitation at the matrix-reinforcement interface. Micro-deformation characteristics of matrix reinforcement interface are modelled using commercial FE software and compared with analytical and experimental data. A method of calculation has been applied to predict the interfacial fracture strength of aluminium silicon carbide (Al-SiC) with 20% Vol fraction. Preliminary results show that the model succeeds in predicting the trends in relation to segregation and intergranular fracture strength behaviour in these materials. The proposed hypothesis will help the design engineers to select and use the materials in structural/load bearing applications. Interfacial strengthening characteristics will in turn give more accurate life predictions of such smart composite systems.

  • A Method of Analysis to Estimate Thermal Down-Shock Stress Profiles in Hollow Cylinders when Subjected to Transient Heat/Cooling Cycle

    by M.A. Ali, S.T. Hasan, D.P. Myriounis

    An empirical solution for the thermal shock stresses in cylindrical shell presented when cylinder is subjected to heating or re-heating case and down-shock cooling by forced air case. Linear equations are developed to describe the severity of thermal shock loading. When thermal gradient and time period are in consideration, it is shown the equations displays good approximation for major characteristics of the thermal shock stress profiles.


  • Fatigue Behaviour of SiC Particulate‐Reinforced A359 Aluminium Matrix Composites

    by D. P. Myriounis, T. E. Matikas, S. T. Hasan

    Abstract:  In this work, we describe the fatigue behaviour of silicon carbide (SiCP)‐reinforced A359 aluminium alloy matrix composite considering its microstructure and thermo‐mechanical properties. A variety of heat treatments have been performed for the 20 vol. % SiCp composite, which resulted in different strength and elongation behaviour of the material. The fatigue behaviour was monitored, and the corresponding S–N curves were experimentally derived for all heat treatments. The fatigue strength was found to depend strongly on the heat treatment. In addition, the fatigue behaviour was monitored non‐destructively via the use of lock‐in thermography. The heat wave, generated by the thermo‐mechanical coupling and the intrinsic dissipated energy during mechanical loading of the sample, is detected by a thermal camera.


  • Crack‐Tip Stress Field and Fatigue Crack Growth Monitoring Using Infrared Lock‐In Thermography in A359/SiCp Composites

    by D. P. Myriounis, E. Z. Kordatos, S. T. Hasan, T. E. Matikas

    Abstract: This paper deals with the study of fracture behaviour of silicon carbide particle‐ reinforced aluminium alloy matrix composites (A359/SiCp) using an innovative non‐destructive method based on lock‐in thermography. The heat wave, generated by the thermo‐mechanical coupling and the intrinsic energy dissipated during mechanical cyclic loading of the sample, was detected by an infrared camera. The coefficient of thermo‐elasticity allows for the transformation of the temperature profiles into stresses. A new procedure was developed to determine the crack growth rate using thermographic mapping of the material undergoing fatigue. The thermographic results on the crack growth rate of A359/SiCp composite samples with three different heat treatments were correlated with measurements obtained by the conventional compliance method. The results obtained by the two methods were found to be in agreement, demonstrating that lock‐in thermography is a powerful tool for fracture mechanics studies. The paper also investigates the effect of heat treatment processing of metal matrix composites on their fracture properties.


  • Predicting Interfacial Strengthening Behaviour of Particulate-Reinforced MMC — A Micro-mechanistic Approach

    by D. P. Myriounis, S. T. Hasan, T. E. Matikas

    The fracture properties of particulate-reinforced metal matrix composites (MMCs) are influenced by several factors, such as particle size, inter-particle spacing and volume fraction of the reinforc...


  • Open Access

    Influence of Processing Conditions on the Micro-Mechanical Properties of Particulate-Reinforced Aluminium Matrix Composites

    by D. P. Myriounis, S. T. Hasan, T. E. Matikas

    During processing, metal matrix attempts to deform and this deformation plays the key role in the microstructural events of segregation and precipitation at the matrix-reinforcement interface. The important aspect of this behaviour is to identify the strengthening micro-characteristics which enhance the material's interphasial reactions in order to improve the bonding properties of the matrix-reinforcement interface. This work focuses on the non-equilibrium segregation which arises due to imbalances in point defect concentrations set up around interfaces during non-equilibrium heat treatment processing of SiC particle reinforced aluminium matrix composites. The important factors affecting the heat treatment process are the temperature, the cooling rate, the concentration of solute atoms and the binding energy between solute atoms and vacancies. Aluminium – silicon – magnesium alloy matrix reinforced with varying amounts of silicon carbide particles were used in this study. Samples in the as-received and heat treated condition were examined by microstructural and microhardness analyses. Based on the analysis, it has been observed that the macroscopic mechanical behaviour of the composite is influenced by several factors including the manufacturing process, the processing conditions, the inter-particle distance, as well as the mean size and the percentage of reinforcement.


  • Microdeformation behaviour of Al–SiC metal matrix composites

    by D. P. Myriounis, S. T. Hasan, T. E. Matikas

    The satisfactory performance of metal matrix composites depends critically on their integrity, the heart of which is the quality of the matrix-reinforcement interface. The nature of the interface d...