Abstract
The article considers the influence of cable line parameters on the power supply of induction motors from underground electrical substations. Ensuring reliable starting of induction motors from underground transformer substations is a critical task. The significant remoteness of consumers necessitates the use of long cable lines, which leads to deep voltage drops during direct start. The presence of nonlinear loads in the network that generate higher current and voltage harmonics further worsens energy performance by increasing total electrical and magnetic power losses in motors and transformers, accelerated thermal aging and insulation degradation in conditions of high humidity and aggressive environments, reduced dynamic stability of electric drives, and risks of process disruption. n this study, a comprehensive simulation of the power supply of induction motors from local and central underground electrical substations without and with the presence of higher voltage harmonics was carried out. An analysis of the voltage drop depending on the length and cross-section of the cable cores for the 1140 V network during direct start of an induction motor for capacities of 100–132 kW was performed, and an assessment of the influence of the harmonic composition of the supply voltage on the maximum (maximum) length of the network at which the conditions for normal direct start at the nominal torque of the induction motor are ensured was also performed. It has been established that in the presence of higher harmonics, the starting current increases, and therefore the voltage drop increases by an additional 4–6 %, which requires a forced reduction in the calculated network length by 15–20 %. It has been proven that to overcome these limitations, when powering an induction motor at distances of more than 1 km from an underground substation, it is necessary to abandon direct starting in favor of using soft starting devices (thyristor voltage regulators) or local vector frequency control systems.