A Dynamic Model of an Electropneumatic Valve Actuator for Internal Combustion Engines
- 3 February 2010
- journal article
- Published by ASME International in Journal of Dynamic Systems, Measurement, and Control
- Vol. 132 (2) , 021007
Abstract
This paper presents a detailed model of a novel electropneumatic valve actuator for both engine intake and exhaust valves. The valve actuator’s main function is to provide variable valve timing and variable lift capabilities in an internal combustion engine. The pneumatic actuation is used to open the valve and the hydraulic latch mechanism is used to hold the valve open and to reduce valve seating velocity. This combination of pneumatic and hydraulic mechanisms allows the system to operate under low pressure with an energy saving mode. It extracts the full pneumatic energy to open the valve and use the hydraulic latch that consumes almost no energy to hold the valve open. A system dynamics analysis is provided and followed by mathematical modeling. This dynamic model is based on Newton’s law, mass conservation, and thermodynamic principles. The air compressibility and liquid compressibility in the hydraulic latch are modeled, and the discontinuous nonlinearity of the compressible flow due to choking is carefully considered. Provision is made for the nonlinear motion of the mechanical components due to the physical constraints. Validation experiments were performed on a Ford 4.6 l four-valve V8 engine head with different air supply pressures and different solenoid pulse inputs. The simulation responses agreed with the experimental results at different engine speeds and supply air pressures.Keywords
This publication has 13 references indexed in Scilit:
- Study on Variable Valve Timing System Using Electromagnetic MechanismSAE International Journal of Advances and Current Practices in Mobility, 2004
- A Study of Gasoline-fuelled HCCI Engine Equipped with an Electromagnetic Valve TrainSAE International Journal of Advances and Current Practices in Mobility, 2004
- The Influence of Variable Valve Actuation on the Part Load Fuel Economy of a Modern Light-Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2003
- Optimization Techniques and Results for the Operating Modes of a Camless EngineSAE International Journal of Advances and Current Practices in Mobility, 2003
- Variable Valve - Control Systems for Spark Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2001
- A High Performance Pneumatic Force Actuator System: Part I—Nonlinear Mathematical ModelJournal of Dynamic Systems, Measurement, and Control, 1999
- The Otto-Atkinson Cycle Engine-Fuel Economy and Emissions Results and Hardware DesignSAE International Journal of Advances and Current Practices in Mobility, 1995
- Control of Engine Load via Electromagnetic Valve ActuatorsSAE International Journal of Advances and Current Practices in Mobility, 1994
- Initial Test Results of an Electro-Hydraulic variable-Valve Actuation System on a Firing EngineSAE International Journal of Advances and Current Practices in Mobility, 1989
- Variable Valve Timing-A Possibility to Control Engine load without ThrottleSAE International Journal of Advances and Current Practices in Mobility, 1988