Mechanical Behavior of Steel–HFRC Composite Girders
- 1 October 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 23 (10)
Abstract
This paper presents the experimental and analytical results of a new composite girder that consists of a steel girder and hybrid fiber–reinforced concrete (HFRC) slab. First, six push-out tests were performed, and the test results were used to verify the interface behaviors of two composite girders. Then, the composite behavior between the steel girder and HFRC slab was investigated under sagging moment. It was found that the composite girder with HFRC slab exhibited a much greater ductility and a slightly smaller ultimate moment capacity, and the probability of cracking was also significantly reduced compared with the normal concrete (NC) slab. Finally, equations introducing the reinforcement indexes to determine the capacity, degree of shear connector, and effective moment of inertia of the steel–HFRC composite girders with partial interaction were proposed. It was found that the analytical results of the equations had a fairly good agreement with experimental results.Keywords
This publication has 21 references indexed in Scilit:
- Finite element modeling of steel-polypropylene hybrid fiber reinforced concrete using modified concrete damaged plasticityEngineering Structures, 2017
- Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced ConcreteConstruction and Building Materials, 2016
- Behavior of composite girder with Y-type perfobond rib shear connectorsJournal of Constructional Steel Research, 2014
- Plasticity Model for Hybrid Fiber-Reinforced Concrete under True Triaxial CompressionJournal of Engineering Mechanics, 2014
- Experimental Study on Hybrid Fiber–Reinforced Concrete Subjected to Uniaxial CompressionJournal of Materials in Civil Engineering, 2014
- Flexural behavior of prestressed composite beams with corrugated web: Part II. Experiment and verificationComposites Part B: Engineering, 2011
- Shear Connection Nonlinearity and Deflections of Steel–Concrete Composite Beams: A Simplified MethodJournal of Structural Engineering, 2003
- Effects of the slab casting sequences and the drying shrinkage of concrete slabs on the short-term and long-term behavior of composite steel box girder bridges. Part 1Engineering Structures, 2000
- Push-out tests on studs in high strength and normal strength concreteJournal of Constructional Steel Research, 1996
- Partial-interaction analysis of composite beams with profiled sheeting and non-welded shear connectorsJournal of Constructional Steel Research, 1990