XQXiang Yi Qiang

Xiang Yi Qiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiang Yi Qiang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

    by Yuliang He, Kai Wang, Zongyong Cao, Peijuan Zheng, Yiqiang Xiang

    Multi-beam box girder bridges have been applied widely throughout the world for many years. However, the cracking of longitudinal joints between the box girders always leads to reflective cracking of the bridge decks during the service period and thus finally affects the safety and durability of the actual bridges. An embedded steel plate (ESP) strengthening method was presented by introducing carbon-A/-B glue to reinforce the longitudinal joints of old multi-beam box girder bridges for this problem. In order to evaluate the feasibility of the proposed method for actual bridges, an old multi-beam box girder bridge was reinforced, and structural parameters including strain, frequency, and deflection were obtained by adopting field tests before and after strengthening. In addition, the corresponding finite element (FE) model of the background bridge was also set up using ANASYS 18.0 to analyze the strengthening process. Analysis results of the actual bridge and FE model indicate that structural stiffness and load lateral transferring performance between the box girders were enhanced after ESP strengthening. Therefore, this proposed strengthening method can be used to improve the mechanical performance of multi-beam box girder bridges and provide reference for such bridge reinforcement.


  • Mechanical Behavior of Steel–HFRC Composite Girders

    by He Yu Liang, Xiang Yi Qiang, Liu Li Si, Yang Ying

    This paper presents the experimental and analytical results of a new composite girder that consists of a steel girder and hybrid fiber–reinforced concrete (HFRC) slab. First, six push-out tests were performed, and the test results were used to verify the interface behaviors of two composite girders. Then, the composite behavior between the steel girder and HFRC slab was investigated under sagging moment. It was found that the composite girder with HFRC slab exhibited a much greater ductility and a slightly smaller ultimate moment capacity, and the probability of cracking was also significantly reduced compared with the normal concrete (NC) slab. Finally, equations introducing the reinforcement indexes to determine the capacity, degree of shear connector, and effective moment of inertia of the steel–HFRC composite girders with partial interaction were proposed. It was found that the analytical results of the equations had a fairly good agreement with experimental results.