Abstract
The growing demand for lightweight and durable materials in automotive, marine, and industrial machinery applications has intensified interest in aluminum metal matrix composites (MMCs). However, producing high wear resistance composites while preserving sustainability is a significant challenge. This study develops and evaluates the tribological performance of sustainable aluminum MMCs reinforced with bio-driven coconut shell ash and aluminum waste red mud materials for engineering applications. Stir casting was used to produce sustainable composites with red mud and coconut shell ash particle reinforcements (2-6 wt. %). The wear rate and friction coefficient were evaluated at a constant sliding distance of 1500 m under varying loads (40-60 N) and speeds (300-500 rpm). The composite samples were evaluated using energy dispersive X-ray analysis (EDAX) and scanning electron microscope (SEM), and their surface roughness and textural characteristics were further examined by 3D-surface topography analysis. Moreover, DoE-RSM optimization techniques were utilized to optimize the reinforcement composition and wear parameters. Experimental results showed that the wear rate and surface roughness of 4 wt. % sustainable composites decreased by 73.64% and 24.3%, respectively, as compared to base alloy materials. The tensile strength of 4 wt% hybrid-reinforced composites increased by 17.9% when compared to the base alloy aluminum material. Moreover, the DOE analysis identified the optimal values as a reinforcement concentration of 3.98%, a sliding speed of 300 rpm, and a sliding load of 47 N for providing the lowest wear rate, which has been validated through experiments. Subsequently, future directions are indicated that could lead to more efficient and superior wear performance of sustainably reinforced MMCs.

This publication has 73 references indexed in Scilit: