3-D Finite Element Method Analysis of Additional Load Losses in the End Region of Permanent-Magnet Generators
Authors:
- 13 March 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 48 (8) , 2352-2357
Abstract
Machine design typically concentrates on the main magnetic and electric circuits while various additional losses are evaluated only by simple empirical equations. The objective of this paper is to examine the importance of the additional losses in the stator end region and in the housing of a 3.1 MW permanent-magnet wind generator. Stator stack clamping ring and finger plate losses are investigated using a 3-D finite element method. 2-D FEM analysis of the stator supporting housing losses is also performed. Two common mechanical component materials are analyzed in the 3-D studies; construction steel and stainless steel. The results show that failure to consider stator end areas and stator supporting constructions at the design stage can result in unwanted additional losses and affect machine efficiency. Indirect verification of the results is provided by efficiency measurements of different versions of the real 3.1 MW machine.Keywords
This publication has 22 references indexed in Scilit:
- Axial Flux and Eddy-Current Loss in Active Region of a Large-Sized Squirrel-Cage Induction MotorIEEE Transactions on Magnetics, 2010
- Validation of a Time-Harmonic Numerical Model for Solving Magnetic Field in End Region of a Radial-Flux MachineIEEE Transactions on Magnetics, 2009
- Analysis of Eddy-Current Loss in End Shield and Frame of a Large Induction MachineIEEE Transactions on Magnetics, 2009
- Calculation and Analysis of Stator End-Winding Leakage Inductance of an Induction MachineIEEE Transactions on Magnetics, 2009
- Three Dimensional Harmonic Field and Eddy Current Analysis for Rotor End Region of Turbine Generator2007
- Comparison of Time-Harmonic and Transient Finite Element Analyses for Eddy Currents in the Stator Clamping System of Synchronous Generators2007
- Inclusion of interbar currents in a network-field coupled time-stepping finite-element model of skewed-rotor induction motorsIEEE Transactions on Magnetics, 1999
- A 3D finite-element computation of eddy currents and losses in the stator end laminations of large synchronous machinesIEEE Transactions on Magnetics, 1996
- Surface impedance method applied to the prediction of eddy currents in hydrogenerator stator end regionsIEEE Transactions on Magnetics, 1995
- An integrated approach for the calculation of losses and temperatures in the end-region of large turbine generatorsIEEE Transactions on Energy Conversion, 1990