Surface Modification and Corrosion Performance of Laser Cladded Co–Ni on Ti–6Al–4 V in 0.5 M H2SO4 Environment
Open Access
- 6 September 2024
- journal article
- research article
- Published by Springer Nature in Journal of Bio- and Tribo-Corrosion
- Vol. 10 (4) , 1-14
Abstract
This study investigates the laser cladding of Co and Ni powders onto Ti–6Al–4 V substrates, varying the admixed percentages while adjusting laser processing parameters. The influence of nickel and cobalt contents on the microstructure, phase composition, and electrochemical behavior of the laser-clad Ti–6Al–4 V coatings were analyzed. Coating morphology and phases were characterized using scanning electron microscopy (SEM) equipped with energy dispersive spectrometry (EDS), and X-ray diffractometry (XRD), respectively. The corrosion resistance of Ti–6Al–4 V, both with and without Ni–Co additions, in 0.5 M H2SO4 was evaluated using potentiodynamic polarization technique. Results indicated that the coatings exhibited excellent metallurgical compatibility with the substrate. Additionally, the high scan speed laser-clad samples showed enhanced corrosion resistance compared to those processed at low speeds. The potentiodynamic polarization analysis revealed passive behavior in all specimens, with higher cobalt content notably enhancing passivity and corrosion resistance by suppressing the anodic reaction.Keywords
Funding Information
- Tshwane University of Technology
This publication has 47 references indexed in Scilit:
- Corrosion and wear properties of Ni-Sn-P ternary deposits on mild steel via electroless methodAlexandria Engineering Journal, 2016
- Microstructural evolution and wear behaviors of laser cladding Ti 2 Ni/α(Ti) dual-phase coating reinforced by TiB and TiCApplied Surface Science, 2015
- Improving the tribocorrosion resistance of Ti6Al4V surface by laser surface cladding with TiNiZrO 2 composite coatingApplied Surface Science, 2015
- Surface modification of Ti6Al4V alloy by pulsed Yb-laser irradiation for enhanced adhesive bondingCIRP Annals, 2015
- Effects of Co contents on the microstructures and properties of electrodeposited NiCo–Al composite coatingsApplied Surface Science, 2015
- Corrosion resistance of Ni–Co alloy and Ni–Co/SiC nanocomposite coatings electrodeposited by sediment codeposition techniqueApplied Surface Science, 2014
- Corrosion Behaviour of Ni–Co Alloy Coatings at Kish Island (Marine) AtmosphereBulletin of Materials Science, 2014
- Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steelsApplied Surface Science, 2013
- Perspectives on Titanium Science and TechnologyActa Materialia, 2013
- Properties and Biological Significance of Natural Oxide Films on Titanium and Its Alloys2001