A numerical study on the low-velocity impact response of hybrid composite materials
Open Access
- 5 October 2023
- journal article
- research article
- Published by Turkish Journal of Engineering in Turkish Journal of Engineering
- Vol. 7 (4) , 314-321
Abstract
Composite materials are advanced engineering materials with superior properties to traditional materials. One of the most important disadvantages is the high cost of composite materials. Therefore, producing composite materials from the first to the last stage is a very important process. Homogenization is the most important parameter in production since composites contain more than one material type in their structure. In addition, composite structures are sensitive materials against low-velocity impacts. In this study, the effect of reinforcement material combination and stacking sequence on mechanical properties used in the production of composite materials was investigated by low-velocity impact simulations using LS-DYNA software. The mass of the 12 mm diameter spherical impactor used in the analyzes was determined as 10 kg and low-velocity impact tests were applied at 20 J, 30 J and 40 J energy levels. The composite samples were modeled with 180x100mm dimensions and the contact between the impactor and the sample was made from the center of the composite structure. Numerical analyzes were performed using the Tsai-Wu damage criterion in the LS-DYNA software, and material properties were defined using the "Mat_Enhanced_Composite_Damage (MAT 055)" material card.Keywords
This publication has 26 references indexed in Scilit:
- Surface modification and grafting of carbon fibers: A route to better interfaceProgress in Crystal Growth and Characterization of Materials, 2018
- A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economyResources, Conservation and Recycling, 2018
- Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplasticsMaterials & Design, 2018
- Estimation of aramid fiber/epoxy interfacial properties by fiber bundle tests and multiscale modeling considering the fiber skin/core structureComposite Structures, 2017
- An experimental and numerical investigation on low velocity impact behavior of composite platesJournal of Composite Materials, 2016
- Pairing effect and tensile properties of laminated high-performance hybrid composites prepared using carbon/glass and carbon/aramid fibersComposites Part B: Engineering, 2015
- The comparison of low‐velocity impact resistance of aluminum/carbon and glass fiber metal laminatesPolymer Composites, 2014
- Free vibration analysis of civil engineering structures by component-wise modelsJournal of Sound and Vibration, 2014
- Review on impact analysis of FRP composites validated by LS‐DYNAPolymer Composites, 2014
- Dynamic Response of Laminated Composites Subjected to Low-velocity ImpactJournal of Composite Materials, 2007